disk are not not in diskpart on windows 8.1
I have two drives WD 2.0 TB I wanted to implement in a RAID 1 array. When I installed Windows 8.1, she saw two discs and I installed on disk 0. But now that I want to use storage to configure the second drive as a mirror, it is not available in storage spaces or in diskpart. BIOS and Device Manager recognize correctly the two disks as there and functional.
Any thoughts?
Hello
The problem you are experiencing requires support from our TechNet forums. Please post your query in the TechNet forums using the link below.
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro
Hope this information helps.
Tags: Windows
Similar Questions
-
I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.
I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.
Need additional details as
Is it a laptop or a pc?
Have you coveted your dynamic disk basic disk?
What the structure of partition on your computer?recover with these details...
-
Install EZ transfer on Windows XP (32-bit) I get an error message stating:
"You are not allowed to update Windows XP. Please contact your system administrator. »
However, I am the only user, and I am named as the administration system. How can I fix?
Hello
Step 1:
You can try to install Easy Transfer in safe mode and check.
A description of the options to start in Windows XP Mode
Step 2:
You can also try to create a new administrator account and check.
-
CD-Rom indicated that all disks are not formatted.
All of a sudden (no major changes to the system) the CD-Rom on my laptop started to say all CDs (burned and commercial) are not formatted and that Windows is unable to read the disc. I reinstalled the drivers and windows updates, but the problem is still there. Thoughts?
1 swap hunt for a well-known work. OR
2. put the drive in another computer. OR
3. start with a bootable CD as the disc to install XP or a Linux Live disc and see what happens. If the drive cannot read a bootable CD (and this will happen outside Windows), then you will know for sure it is a defective material. MS - MVP - Elephant Boy computers - don't panic! -
I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."
Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?
You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.
In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard
-
Music files are not listed in the Windows Media Player library
Music files were deleted from Windows Media Player. The need for a Solution.
AT & T Communication Manager, who gets my mobile internet card online, asked if he could deal with some updates. I had only had the camera for a few days and assumed he was talking about some AT & T software.
Next thing I know he turned my internal computer to the outside. Washed and folded it carefully but seems threw things into the pockets now. I had to hunt for my documents, but a lot of things are different, changed my toolbars, settings on Open Office. Cannot access some files. He was asked to record a program I had a lot of time. Nothing in the Windows Media Player I had the program adds a big chunk of my record mp3 files music. But I think that much of the music in my eMusic account, which now has nothing in it, can be conveniently added (unless I'm going one by one I think). Moreover, my eMusic Download Manager is empty.
I want to reverse sync my mp3 player but don't know how. Should I get Windows Media PLayer 11? I have Vista.
Thank you very much. And if you can help without talking over my head I would appreciate it.
Hey Asher,
1 are the music files on the physical hard disk?Step 1: If music files are present on the hard drive, then we can manually add the files to themedia player library or create playlists accordingly.Step 2: If the files are not deleted permanently from the hard drive, then restore the computer to an earlier time should help. To restore the computer to an earlier time when everything worked well, try the following steps.
a. Click Start, type system restore in the search box and then in the list click on the system restore program.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.
b. in the System Restore dialog box, click on choose a different restore point and then click Next.
c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
d. click Finish.Windows Media Player 11 is the media player by default in Windows Vista.
See Windows Media Player sync: frequently asked questionsKind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Just upgraded to Windows 7 from Vista and am having a problem with Windows Media Player 12 and its indexing. In WMP11, you could put all your pictures in your "My pictures" folder (so they appear in the Media Center) but then exclude it from indexing in WMP11, then it would not bog you try to index all things.
This option has been removed in WMP12. If you want images to appear in the Media Center, they must be included in your WMP12 library. (Even if Media Center does not use the WMP library to ALL display pictures - she designs per file)
Because I have thousands of photos and videos, this is a major problem at any time an Extender is turned on, because for some reason when you start an Extender it forces a new scan of all your media. It is in turn completely failed the system leaving the main centre of the media both all completely unnecessary extensions while CPU hits 100%.
So I have my girlfriend trying to listen to music in the bedroom on the XBOX360 giving me eyes stink saying "This sucks." and my daughter in the TV room to complain than his scooby-doo show "keeps skipping and stopping."
Hello danwheeler, welcome.
There are several ways to do it, however, I offer an option to try more than one backend solution.
For purposes of reference, take a look at this thread if the solution below does not work:
http://social.answers.Microsoft.com/forums/en-us/w7music/thread/67ac2992-e76e-408a-90a8-0fa173885a6eTry this:
1. click on START
2. click on "Control Panel."
3. double click on "Folder Options".
4. Click to "Show hidden files & folders".
5. click on 'Apply' at the bottom right
6. close Windows Media Player and other applications (REQUIRED)7. click on START
8. click on 'computer '.
9. double-click on "disk Local (c)"
10. double click on "users".
11. double click your user name
12. double-click on "AppData".
13. double-click on "Local".
14. double click on "Microsoft."
15. double-click on 'Media Player '.16 "wmpfolders.wmdb" right click and select open with
17. If Notepad is not in the list, click Browse and find Notepad in C:\Windows
18. Once you select the Notepad, click Ok and notepad opens the database file19. If you see a folder in the list that you want to exclude, on the line of code, look for ' exclude = '0' "and replace the '0' with a '1'.
20. If the folder you want to exclude is NOT in the list, and then add this right after the last line of21. click on file > save
22. restart your computerThe issue must be resolved. These instructions are not easy to use, so if you have any quesetions, please ask.
Let us know if it works,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Discs Blu - Ray are not more recognized in Windows 7
Hello
I have 2 laptops with internal blu - ray, who never stopped recognizing Blu - Ray discs. I live in the United Kingdom
A Blu - Ray drive is an Optiarc, the other a LG - PC with the Optiarc has Win 7 64 bit Ultimate and the brand-new PC with the LG drive has Win 7 64-bit Home Premium edition. Both drives are listed in the compatibility list - and were shipped preloaded with Win7.
They both played Blu - Ray discs in the past, but it is even more recognize them in the drive.
I ran Diagnostics from CD/DVD drive suggested in other similar topics, but the reader does not recognize the disks, it cannot solve the problem.
I uninstalled and reinstalled several times readers in Device Manager.
I also tried the fix involving the upper and lower filter removal in a registry key, also without success.
I tried to change AHCPI to AHT in my bios - my bios has no AHT, just AHCPI and IDE
I've installed, uninstalled, and reinstalled several different Blu - Ray software Acer Arcade, PowerDVD, TMT MediaTheatre Total, Slysoft AnyDVD HD and others. None no longer works.
I even restored the two default factory machines and reloaded drivers manufacturer - no luck.
The manufacturer, Acer, has even replaced one of the machines - when he arrived, he played all my blu - ray discs. After only a couple of windows update, it doesn't even recognize the discs.
As you can imagine, I am at a loss on how to fix it.
I noticed that the driver is installed when the hardware is detected is a Microsoft driver since 1996 - would this work with Blu Rays? No disc manufacturer provides a different driver, and update driver is the correct driver.
The compatibility list says that Blu - Ray discs should work with the default drivers installed
I'm quite proficient with PC hardware, after fixing computers for 21 years, but this question has me - and thousands like me on the web - absolutely perplexed. It seems to affect any player Blu Ray with Win 7 installed.
Please can you help me
Thanks in advance,
SoC
Hello
Be sure to communicate with decision-makers readers as it is a known problem if it occurs regularly
with Windows 7. Also keep in touch with Acer for the same reasons - is planning to ask ALL those
for updates of the firmware.Is it possible that you install the same software on the two computer such as antivirus/antispyware.
security programs or even a CD/DVD player and burn programs or others that may be causing
the problem?If you are sure that it's an update, you can try to remove the update or even re - install Windows 7 and
block the installation of updates so you can enable them one at a time.If you get it working brand a Restore Point immediately make one before installing a
programs (before each major) and before you add updates.How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlHow to uninstall a Windows Update in Windows 7
http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.htmlHow to hide or restore the updates of Windows hidden in Windows 7
http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html===============================================================
Perhaps a repair install might help:
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html===============================================================
You've done most of them however this is my usual convenience store just in case.
The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
However the same issue could have an impact on your drive.
http://support.Microsoft.com/kb/975270/-----------------------------------------------------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
HP Dm1 3025DX network controller drivers are not installed after reinstalling windows
Hello
I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!
Judging people, see if they install.
-
Restore disk will not work need a windows copy XP where can I find one?
My hardrive broken so I am new and my restore disk does not work where can I get a version of windows to put it on a floppy disk and use it on my computer OSless.
XP has disappeared.
your best bet is to work with the manufacturer of your laptop, maybe they xp on their shelves.
also, the restore disks may require specialty measures to run for them to be activated.
so for the two cases above, visit your computers home site and look for the model number of your laptop for the faq on the help of restore disks / recovery discs / factory restore.
by the way, how broken is the old hard drive?
He must have a hidden section on it with all the preserved original software which can be used to restore the hard disk.
but this section could also be copied into the new HDD as well, according to which 'broke' implies.
by the way, is that the technician who replaced your hard drive take a look at the restore disks too?
-
File extensions are not displayed in my windows Explorer
I use Windows XP SP2. Since I do on this specific computer software development, being able tp see file extensions in my window of the Explorer would be very useful. I already tried the standard tool > Folder Options > view tab > show the file extensions for known file types to achieve this, but it does not display the extensions.
It is a big problem for me because when I need to do something with executables of the application that I've done, I have to guess which file is good.
Does anyone know why my file extensions are not display? Logan Young, hopeful MCPD Web Developer
You must determine if the computer is really clean. I like Avira, but antivirus programs are not designed to catch non-viral malware. Do preparatory work to get rid of temporary and Temporary Internet Files, describes the relationship I have everything first you gave (and repeated below for convenience), then run MBAM.
http://www.elephantboycomputers.com/page2.html#Removing_Malware
Another thing to check - after the computer is really clean - if the problem occurs in a different user account. You will need your colleague to create a test account in the server, then the one on your computer. MS - MVP - Elephant Boy computers - don't panic!
-
My themes are not working in my Windows 7 Ultimate
My themes do not work in my Windows 7 Ultimate. The current theme will briefly Flash on during the shut down. Theme services are running and the other says/manual start. I'd like some help on this one! Thank you.
I just checked some of the solutions and the other worked. Ease of access > make computer easier to see > uncheck the box "remove background images."
-
Why the links are not active in the Windows 8 e-mail program?
I have been using Windows 8 during about two months now and I must admit that it is a little buggy but no bother it's why people like me come to the forums to help out and let everyone know something is not working correctly! If somehow when I get email from anyone with links in their email (YouTube) or everything that I noticed that they are not active and will open not in IE 10 or any browser. Now it's with the preinstalled Windows 8 Mail program not the version of the browser on the Outlook.com. I guess it is just called Outlook, but on the start menu, it is listed as a courier. Y at - it a kind of reason for this or is it an oversight of some parameters, that I can't find to activate links? Tried searching with no luck and the help function substantially the same, no luck.
Hello
Welcome to the Microsoft Community, the best place for all your windows related queries.
From your description, I understand the links that you receive in your email using the mail app are not active.
Could you answer a few questions to understand the question.
1. in response to the same question in all accounts e-mail you have set up in the mail application?
2. is Internet Explorer your default browser?
I wish to inform you that this is not a bug. You should be able to access links through the mail application.
So I suggest you to remove the account and it resynchronize on mail application and check.
Reference:
Mail app support:
It will be useful. For more information related to Windows, you are always welcome in our community.
-
I have 5 computers connected to my router. 4 are wired and I put in place so that each of the 5 has its own static address. One of these computers is my DVR security camera system to allow monitoring my cameras remotely. It worked very well for years, and now I can't access the DVR remotely. I noticed in the router configuration that DHCP clients are not displayed appear as active, even if the two computers are on. I am running XP Pro on these machines and I can PING each other so I know some communication happens. Also, I can access cameras DVR from my main computer using the internal IP address, I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on the resolution of this problem.
Thank you
It may have something to do with the firmware of the router. I suggest that you should do. The firmware that you can download from the site Web of Linksys is version 1.0.0.3 build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding the reset button). It is best to re - configure the router from scratch also. Try to power cycle your network as well.
-
All disks are not (but OK after power cycle). 5.3.12 T3
Hello
I have a ReadyNAS NV + v2 with 4x2GB HDD.
He was fine on 5.3.12 T3, but twice in the last week, I noticed the morning (he auto-fermetures to 02:00) on the screen LCD allows you to select the message saying disks 1-4 have failed.
I have to unplug/Plug and it challenges very well.
Newspapers by e-mail
Thank you
Andy
Thanks for the newspapers.
Your disks are in need of a firmware update.
First back up your data.
Then update the firmware on your drives firmware CC3D.
Maybe you are looking for
-
Toshiba Satellite Pro L40 remove keyboard
HelloHow can I get the keyboard off / swap it on that? His met little liquid and is not satisfied at all. I found a screw labeled KB on the basis and it seems to loosen the keyboard but I do not see how to remove...Oh and Toshiba... Why not follow @H
-
every day, the backups fail
as a computer geek friend helped me every day that I get the message that my "last backup failed" How can I fix?
-
I have a Compaq PC (with pre-installed software) Ms XP Home installation disc has been provided, no recovery disk was created by the former owner. (My son). It hangs when booting with a blank screen; all the time he would do it has auto logon.I have
-
Hi all My company is migrating from a 4-digit 10-digit dianplan. The idea is to keep the calls intra-site with 4 digits and called intersite 10-digit. The question is should I change the extensions on CUCM 10-digit numbers and add a rule of translati
-
Unable to take the PC remote access
Original title: remote PC IAM not able to take the pc remotely