distorted audio USB jack

Similar Questions

• Crack suddenly / audio distortion via USB interface

  Hello

  I use an iMac of retina end of 2015, which is connected to a USB AG06 Yamaha interface. The interface provides an audio output to my studio monitors.

  For these months, audio works flawless, but all of a sudden yesterday things got ugly. Briefly the sound works (often less than 30 seconds) then crackling / distortion occurs, causing finally audio fade out and back in. The problem is temporarily resolved if I disable the interface and turn it back on. I have not changed the settings or installed new applications - the question is just appeared from nowhere.

  Initially, I assumed that it was the fault of the USB interface, but I tested it on another Mac and it works without any problem. I tried to restart, stop, uninstall all additional audio devices, and disconnect all other USB devices, but the problem is still there. I tried other USB devices, including a Schiit Audio USB DAC on the iMac even, and it also works without any problem.

  Any idea is appreciated!

  Thank you.

  all USB audio devices act the role of being a card usb external audio such always needs a driver, don't know if there are any drivers for the card generic usb audio if I was you, then I go to yamaha and look for an osx for your version of driver for their product

  Apple do not have drivers for hardware devices of third party if included in osx, then it is because the developers of hardware committed a pilot tested and improved Apple and became part of the osx installation

  If a new version of Mac OS x is installed, and yamaha has not committed a driver or the same clerk driver than the last time and he could not test it because it displays the questions you experiences in some cases, and you are upgrading, then there is no new yamaha rider so your system just stick to previous driver

• The headset audio USB deforms after initially connect xbox 360 controller for windows

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  writing in the new message: * e-mail address is removed from the privacy... *

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

  I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

  http://www.Newegg.com/product/product.aspx?item=N82E16817182168

  I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• Challenges of the audio input jack (seems not work)

  Hello

  I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

  Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

  Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

  I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

  Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

  Any suggestions on how to proceed and get my audio jack working again please?

  Kind regards

  Klmdb

  Hi @klmdb

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• Drivers (Asio?) Center Audio/USB multimedia Hub

  Hello

  I'm looking for drivers for Multimedia Center Audio/USB Hub and for the Asio drivers for it. I can't find! Can you help me?

  Hector.

  Hello

  Well, I'm not 100% sure what you are looking for but maybe this information I found on these sites will help you:

  http://Downloads-ZDNet.com.com/USB-audio-ASIO-driver/3000-2120_2-10108225.html
  http://www.asio4all.com/

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• get sequential messages on audio input jack

  First a box with the speaker appears with the message "You just plug a device into the audio."

  then he stands up again with
  "You just unplugged a device to the audio input jack.
  He repeats these messages even with disconnected speakers.

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. you remember to make changes to the computer before this problem?

  4. you get this Realtek HD Audio Manager error message?

  Follow these steps:

  Method 1: Run the troubleshooter if you are using Windows 7
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If you get this Realtek HD Audio Manager error message, you can try to disable the notification.

  (a) open Control Panel, select hardware and audio.

  (b) scroll down and select Realtek HD Audio Manager.

  (c) click the little 'I' in the lower right corner.

  (d) turn off the box "Show icon in the notification area.

  (e) double click on 'OK'.

  If this is due to a defective material, I recommend you contact the manufacturer of the computer.

• Audio USB device not recognized by flow 7 Tablet PC

  Half the reason I bought the 7 flow was to use it has a music player with my D2 USB Audio DAC Headdphone Amp iBaso.

  The device is recognnized by my Office Win 8.1 and all other computers, I plugged in.  Why it is not recognized as an audio playback device is beyond me.  I tried all of the suggestions that I could find on the net without a bit of luck.  Is therte a reason why this feature has been disabled on the 7 Strwea?

  Problem solved!

  It turned out to be a combination of the usb cable and the USB OTG hub.  The iBaso has been specific cable on the device being recognized on my desk.  When I tried the work cable witht the OTG hub on the 7 of flow is not as usual.  But when I tried the market good adapter monoprice it worked.

  Audio usb solves the problem of horrible noise with the jet 7 lookiing for a fix for anyone.

  The OTG hub works with a mouse and a player mSata perfectly, but not with the iBAso CAD.

  Thanks to all who responded to keep me by train.

• Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

  Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

  Hello

  1. this happens when you plug in the headphones?

  2. this happens to you while streaming music online?

  3. when exactly you get this message?

  Please follow the steps mentioned below.

  Method 1:

  Follow the steps mentioned below.

  a. click the Start button.

  b. in the Start Search , type Device Manager and press ENTER.

  (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

  Method 2:

  Please run the troubleshooter mentioned in the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

• Deskto Phoenix 810-160 HP ENVY: optical audio output jack

  Just bought this new desktop computer and run the output through the optical audio output jack audio in my receiver, AWESOME!  Was wondering if I could connect an optical audio divider to this Jack and divided the audio output of the computer of TWO distinct receivers?

  Appreciate the work you people are doing at HP, have already ordered your suggestion on Ebay for less than $5.00 with free shipping.  I'll let you know if it works, my knowledge of electronics is not old enough to know if the signal from the optical output on my HP computer Jack is strong enough to divide and two stereo receivers to power without a signal amplification.  Thank you very much!

• Smartphones connect blackBerry storm to car Audio input jack

  My (new) Volvo has an audio input jack, I connected my storm with a standard stereo cable.  I played several songs on my way into work.  At noon, I plugged the storm back to find the storm no longer plays on the audio jack.  It's like the storm audio Jack does not recongize the connection, the songs through the speakers of the storm.  I ran a few tests.  The stereo headset supplied with Storm still works.  The cable and the plug of the car still work with other MP3 device.

  Why all of a sudden it does not?

  Does anyone else have this problem?

  And, Yes, I jumped the battery and restarted.

  Another point to add to my list, this phone is driving me crazy!

  It was my cable!

  Even if the cable has worked in another device, there be a small difference between the work cable and the non-working.

  How to remove this thread or mark the thread solved?

• XPS 13 9350 - USB DAC - severely distorted Audio

  Hi all

  I'm playing a DAC USB files DXD (352.8 kHz FLAC) and I'm getting intermittent severe distortions which, to me, looks like a problem of USB transmission caused by the DPC latency. My configuration is:

  -Earn 10 Pro
  -jRiver MC21
  -Mojo chord connected via USB using rope ASIO driver 1.05
  -Alternatively AudioQuest Dragonfly 2 (downsampling to 88.2 kHz samplerate)

  I get distortion with the two DACS, which suggests a problem with the XPS 13 HW or SW. I disabled "Allow the computer to turn off this device to save power" for USB3 Intel eXtensible Host Controller and USB (xHCI) root hub, but that has not solved the problem.

  Power management is set to high performance, under Advanced settings, I put USB selective suspend setting to disabled.

  Check for latency DPC and latency LUNS do show any question and a list of the PC as being capable of streaming audio in real time.

  The problem disappears if I chose in jRiver direct sound driver. It occurs the same if I chose the ASIO, the WASAPI and core drivers streaming.

  The problem does not occur on a HP zbook 15u.

  Someone else has a similar problem and no matter who solved?

  I don't know if you've ever thought about it or went nuts perhaps, but I had the same problem and have found a workaround. I have a XPS15 9550 and had the same problem with the Mojo. I bypassed by disabling C-States (the processor sleep state) in the BIOS. This will reduce the battery life to a certain extent, but now the DAC works without a hitch.