T440s is not awaken from its slumber

Similar Questions

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?

• T430s is not awaken from its slumber with mouse and USB keyboard Logitech wireless

  Hello

  My T430s is hooked up with a monitor and a keyboard/mouse (Logitech LX710) wireless.

  I put the laptop itself under my desk since I did not take it with me that often.

  Now, when I hit the sleep button on my keyboard, the computer goes to sleep, as expected.

  -There is no way (it seems) that I am able to wake up.

  I am running Windows 7 (x 64).

  I tried different USB ports (to make sure I use a motor) for Logitech wireless USB adapter.

  In the BIOS Setup, I checked to see if the USB ports can wake the computer from sleep mode.

  In the devices tab Manager keyboard (and mouse), power management, I enabled "allow this device to wake the computer". I did the same thing for the "Human Interface devices".

  "Update driver software" for the keyboard and the mouse says I have the latest drivers to install.

  In power controls of Lenovo, under Advanced settings, USB settings, I tried the USB selective suspend allowed many people with reduced mobility. They are disabled for the moment. Under global settings of power, I enabled 'always on USB"and"even when the computer is turned off.

  Then... I'm slowly running out of options. So for now, I can leave the computer at any time (it's what I do, with an occasional reboot - that seems not so respectful), or I can crawl under my desk in the morning, take the laptop on the little stool that I put there, make attention to diet, USB and cables monitor and external hard drives, open the laptop , press the power button, close it again and carefully put it back. What is bulky.

  So... what someone has ideas on how to fix this and leave my wireless keyboard to wake the portable computer?

  (Oh.. and of course buy a wired keyboard is an option, but not one I prefer...)

  I only have the mouse, but I have a T430s and a Microsoft wireless mouse to wake it. I always use the blue (USB3) port on the left side for all functions related to the startup, because I learned that the always active port (on the back) is started later in the process of turning the power on. Use the right-click button to wake it up, which is the function that was originally defined as one to this end, even though I believe that this movement of the mouse as she wakes up on a wired mouse.

• Mini Mac not awakened from his sleep by action keyboard or mouse

  My mac mini is not awakened from his sleep by mouse or keyboard action, only a short press of the power button you wake up the mini. Any suggestions for a workaround or fix?

  Try resetting the SMC and the PRAM and then retest. iMac SMC and the PRAM reset

• Inspiron 17R SE 7720 wake from its slumber when the lid is closed through the usb keyboard/mouse

  So I have an Inspiron 17R SE 7720 which has all of the latest drivers with BIOS A11 (Win 7 Ultimate x 64)...  I have all the settings properly configured for sleep power (no hibernation), however no matter what I try, I can't get the laptop to wake up when the lid is closed through USB keyboard.

  I use a combo of MK560 Wave from Logitech (unifying receiver) - keyboard and mouse have the wake-up option enabled in the settings of their material.  I also wake up from USB enabled in the BIOS.

  What is interesting is that if I put the computer to sleep with the lid open, I can do/wake it from Logitech devices.  With the lid closed, I can only do sleep - the only way to wake up, he is to open the cover and press the power button.

  Anyone know a solution to this?

  Cliffs Notes:

  Cover open: CAN sleep/wake from USB keyboard/mouse

  Cover closed: can sleep ONLY - don't wake up if I open the Start button / cover & press

  It seems that a new A13 BIOS was released on 18 March, all it says in the section '' correction '' is to "maintain the release." Download it now and see if it fixed more on the question of the USB.

• Inspiron 15R (5537) wake from its slumber when the lid is closed through the usb keyboard/mouse

  I have an Inspiron 15R (5537) which has all the latest drivers from Dell BIOS A01 Reference (Windows 8). I have the options of closing the lid set to "do nothing" for the two battery and plugged in, but no matter what I try, when the lid is closed I can't the laptop to wake up via USB keyboard or mouse.
  The keyboard and mouse have the wake-up option enabled in the settings of their material.  I also wake up from USB enabled in the BIOS.
  What is interesting, is that if I put the computer to sleep with the lid open, I can wake him up from the keyboard or the mouse.  But with the lid closed, the only way to wake up, it should open the cover and press the power button.
  Anyone know a solution to this?
  Summary:
  Cover open: CAN wake from USB keyboard/mouse.
  Cover closed: don't wake up if I open the lid and press the power button.

  Pete,

  Depending on where you live, you will have the rights of consumers.  I live in Australia and we have pretty good consumer protection.

  I asked Dell - repair, replace it with one that works, or pay back me.

  They went away for a few weeks, and when I "called home" a few times, they acknowledged that they could not solve the problem and offered me a full refund. The laptop was picked up yesterday and I expect the refund within about five days. The guy on my "case" has been very professional!

  I guess that you informed Dell FORMALLY of the problem via a support ticket?

  I did that and followed by chat and phone calls.

  Whist, the ability to wake up via USB is not explicitly described in any of their literature, the bios has available and W8.1 has the facility.  they built it all - EXCEPT that they forgot the lid...

  see you soon

• Windows 7 upgrade from 32 bit to 64 bit, 64 does not start on its own

  I am trying to upgade win 7 32-bit to 64-bit. I bought a new copy of Windows 7 Home premium 64-bit.  It does not start on its own, is there some

  type of bootloader on the net. who's going to help or what!

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  -----------------------------------------------
  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

  Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

  You may have turned on "Selection of object by the path only" in 'selection Options.

  

• Satellite L755 - 1 CD a very silent sound from its speakers

  Hello

  I would ask for assistance if there is what I can do to have a very powerful sound on my new laptop Toshiba satellite L755 - 1 CD.

  I put the speakers at the highest volume possible, but sound from its speakers is very, very quiet, so I can't listen to music if I am just a few meters away from my laptop or when my friends call me on Skype.

  Sometimes I can't hear the sound if I'm not very close to the laptop. It has to be really quiet in the room that I hear music or talking to someone on Skype. The sound is not bad, just too quiet.
  It has speakers onkyo and I thing that they don't work well, or the volume control is not properly set.

  PLS, let me know if I can improve the volume elsewhere that in its volume control (I put the volume louder) or can I save somehow if my speakers are working properly.

  Thanks in advance.

  > Sometimes I can't hear the sound if I'm not very close to the laptop. It has to be really quiet in the room that I hear music or talking to someone on Skype. The sound is not bad, just too quiet.

  Have you noticed that silent sound using Skype only?
  If Yes, then I would recommend checking the settings of Skype.
  There you will find the audio options for microphone and speakers.

  In addition you can got to control panel-> sound-> the Read tab
  Here, you mark the speakers press the properties button. New window should appear and there you have to choose the levels tab. Here, you can increase the volume level too.

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• My cd rom device does not work because its configuration in the registry is damaged, (error Code 19).

  My cd rom device does not work because its configuration in the registry is damaged, (error Code 19). Tried all the easy solutions (update - was active), any ideas? Thank you

  Hello

  ·         What is the accurate and complete error message?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/929461

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

• When I start the Director I get "the collection of files its not valid or its corrupted. A new empty collections file has been created ".

  I've been using Director windows 2.6 on my operating system from vista for several months.   I just did the upgrade to windows 7 and now I get this message.

  "The collection file is not valid or its corrupted." A new empty collections file has been created "."

  Then, it closes the program.

  I had to rename a file called FFDshow.ax to another program called Muvee AutoProducer 6.1 works but I do not see how would the file collections of this program.

  Help, please.

  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell coming Pro 8 do not wake from sleep

  Hello Dell and everybody, my DV8Pro not waking from sleep. I had to press the power button for 10 seconds to start up again. Someone at - he found a solution to this? Reference dell is listening to its customers? Thank you.

  Try ' Qualcomn Atheros AR6004 WLAN adapt. "

  In addition, be careful not to disable "Wake on Magic Packet" and "Wake on pattern match.

  1. click on set to update driver

  2. click Browse my computer for driver software

  3. click on Let me pick from a list of device on my computer drivers

  4 uncheck Show compatible hardware

  5. choose Qualcom Atheros AR6004 WIRELESS network adapter
  

• Error message: failure of the last attempt to resume the system from its previous location

  I have problem, I can't do anything computer just stuck on the error message screen that reads "the ultimate attempt to resume the system from its previous location failed", the keyboard does not work I can not choose between the choice that is to say 1. continue with the curriculum vitae of system or 2. delete restore data I can't even boot from an installation CD. Help, please

  Hello aliciamulrainqz,

  Apart from questions of Gerry C J Cornell, I have included a link below where the user reported an error even.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/delete-restoration-data-frozen-Win7-Prof-64/36407a58-e66b-43DE-A21D-f118c85153b4

  Thank you

• How can a computer refurbished be removed from its original group policy?

  Original title: refurbished computer locked in group policy

  How can a computer refurbished be removed from its original group policy?

  What is a "destructive factory restore?

  Most if not all Windows 7 PC's have a hidden partition on the hard drive that allows you to restore the machine as long as the plant. It is "destructive" because it erases all personal data and all the applications that have been loaded by the owner. You should consult the manufacturer's web page for detailed instructions.