DMP 4400 G RS 232 connection with Cisco LCD 100 PRO 40N

Similar Questions

• How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

  Hi team

  Hope you do well. !!!

  currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

  1 users will connect: user advanced browser on SSL VPN pop past username and password.

  2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

  3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

  4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

  This is my requirement, so someone please guide me how to set up step by step.

  1. how to set up the Radius Server?

  2. how to configure CISCO ASA?

  Thanks in advance.

  Hey Chick,

  Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

  http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

  Hope this helps

  Knockaert

• Linksys Wag320N associate connection with Cisco SLM2024

  I plugged the SLM2024 (switch) and the WAG320N (modem, router but disabled wireless adsl router) with two patches and grouped the two links in a link in the installer SLM2024. SLM2024 and WAG320N work perfectly, the statistics showed no loss of packages of Ant conflicts... but any computer (win 7) lost access to the internet, otherwise access to the local network. Can someone help me?

  The WAG does not support the aggregation of links.

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• DMP 4400 cannot read local files

  I use a DMP-4400 with firmware v.5.2.2. The device connects to the network fine and is able to display Web pages on the internet without problem; the ftp server works well also. However, when I try to play any type of local file (located in/tmp/ftproot/usb_1 /) the screen remains blank. I'm assuming that the files because the failover URL is not displayed for .mpg or .html files. I use video files of type MPEG-1 for testing. I have attached one of these videos with a sample file .html that I intend to use a loop of several files.

  Video files are managed using the:

  "/ tmp/ftproot/usb_1/melt.mpg" is entered in the dialog box 'Storage path' under ' play video file stored locally "the GUI.

  HTML is launched using:

  "file:///tmp/ftproot/usb_1/play-local-mpg.html" is entered in the 'URL' dialog box under "URL to display" the GUI.

  These problems if the files are located on the internal memory or external USB disk. Any help will be much appreciated.

  Peter,

  I was able to fix, the issue seems to be with the content, I converted with VLC Player MPEG-TS and it works. Please find the attached transcoded file.

  Use

  playlist var = new Array)

  'file:///tmp/ftproot/usb_1/test1.ts '.

  ) ;

  If this meets your concerns, please mark this message as 'response '.

  Thank you

  Sagar Dhanrale

• Droid Turbo could not connect the Cisco access point

  Greetings.

  Since the upgrade to a droid turbo, I was unable to connect to the network without wire of my work. I work in the it Department, but my experience with Cisco technologies and wireless is limited, so I tried to understand why. My previous bike x worked fine. We have a network of all the access points managed by a controller Cisco 4402 running version 7.0.98 of the BONES. I was able to connect to another wireless network that I could meet outside of work, and I am able to connect to the network of my work if I connect it is unsecured guest SSID. Only connections to our 4 secure networks fail. The controller reports that my phone cannot all simply to authenticate. The controller is configured for WPA2 / AES using a key 284 on the particular network, that I am trying to connect. I entered this key manually both via copy and paste. As far as my phone goes, I only tried to withdraw and time networks like tent to start it in safe mode without success. I read on various forums android that maybe it's a problem related to Kit Kat and this kind of problem has appeared on other handsets from other manufacturers, but nothing definite.

  Any suggestions would be much appreciated.

  -Josh

  Let me direct you to two other discussions here on the Droid Turbo forum and the other from Cisco which may help.

  Unable to connect to company wifi

  https://forums.Motorola.com/posts/af633eb3e4

  DROID WiFi Turbo questions

  https://forums.Motorola.com/posts/06a2f3c5ca

  Connectivity issues with Cisco and Moto X (Gen 2) allowed RMC controllers (probably related)

  https://supportforums.Cisco.com/discussion/12331486/connectivity-issues-Cisco-controllers-and-PMF-enabled-Moto-x-Gen-2

  I hope this helps!

• How can I test my RS 232 port with Hyper terminal?

  Hello

  I have a big problem with the XANXDC driver for xdc Xantrex power supply 30-200 for a few days, I can not connect my food with my program, I choose a VI gave with the driver (getStarted), but there is an error, I would test the RS 232 connection to make sure that all is ok, with a terminal hyper, but I do not know how , I have never done this before...

  Could someone help me please?

  Assuming that your PIN is correct, you will need to replace the cable.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• connection with the base switch

  im running windows server 2008 with cisco switches, but when I connect a switch to one of my drops and add more than one computer to the switch, that it is not connect the computer that a network is running the rest does not get why?

  Hello joseconcepcion

  Your question would be better suited for our Tech Net forums. Please post your question on the link below. Thank you.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Connectivity with other VSS VSS

  Dear,

  I would like to confirm on the VSS structured design. We can connect 2 VSS back-to-back as the core and Distribution? I saw 1 Cisco document that give me only limited information with only the domain ID will be different on the two back to back THAT VSS pair connected.

  I want to confirm what is the link between the 6500 (VSS) and 4500-x (VSS). We can connect as layer 2 Port channel between Catalyst 6500 and Catalyst 4500 - X? Access layer to the works as layer 2 and connect with 4500-X as well. Then the Lass remain on Core (6500)?

  Or we can connect the two VSS pair as layer-3? If yes then Lass remain on 4500-X?

  Thank you

  Salvation;

  For back to back VSS, you just need to worry about the VSS domain id, it should be different.

  with reference to n/b connectivity 2 VSS, it may be L2 L2 or L3 port channel there depends on your condition.

  Thanks & best regards;

• AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2

  Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type

  Type of TG_TEST FW1 (config) # tunnel - group?

  set up the mode commands/options:
  Site IPSec IPSec-l2l group
  Remote access using IPSec-IPSec-ra (DEPRECATED) group
  remote access remote access (IPSec and WebVPN) group
  WebVPN WebVPN Group (DEPRECATED)

  FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
  FW1(config-tunnel-IPSec) #?

  configuration of the tunnel-group commands:
  any required authorization request users to allow successfully in order to
  Connect (DEPRECATED)
  Allow chain issuing of the certificate
  output attribute tunnel-group IPSec configuration
  mode
  help help for group orders of tunnel configuration
  IKEv1 configure IKEv1
  ISAKMP policy configure ISAKMP
  not to remove a pair of attribute value
  by the peer-id-validate Validate identity of the peer using the peer
  certificate
  negotiation to Enable password update in RADIUS RADIUS with expiry
  authentication (DEPRECATED)

  FW1(config-tunnel-IPSec) # ikev1?

  the tunnel-group-ipsec mode commands/options:
  pre-shared key associate a key shared in advance with the connection policy

  I'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)

  Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..

  But it would be nice to have a bit more security on VPN other than just the connections of username and password.

  If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?

  If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?

  I really hope that something like this exists still!

  THX,

  WR

  You are welcome

  In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.

  With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.

• Funny moment with CISCO SPA112

  I have successfully set up CIsco SPA112 - almost works, I can't just change admin password.

  I connect with the default user password: admin/admin

  I go to the menu of their administration, but on the left, nothing appears in admin link just "quick installation" - and nothing related to their 'administration '.

  Any idea what's going on?

  Thank you

  Peter

  Hello Peter,.

  Have you tried using another browser?  Most of the web pages admin works perfectly in Internet Explorer or Firefox.  I know that they are sometimes very difficult to display properly in Chrome.

  Because you are right, for the SPA112 user, name changes and password are under Administration > management > list of users.

  I hope that he will bring up for you, but if not let me know, and we will try something else.

  Christopher Ebert

• Cannot reset the user vmail with Cisco Unified CM Administration password

  We use Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to tell me that they could access is no longer the voicemail, getting PIN disabled. Ichanged the PIN with the Cisco Unified CM Administration that accepts the new pin without problem, but when we try from the phone, it does not work. Any ideas... Thank you Don

  Hi Don,

  For voicemail partners changes/updates, you should choose

  2 cisco Unity Connection Administration.

  Then; Users > Find/list > user associated with selectect > drop-down Edit > change passwords >

  Change voicemail password

  See you soon!

  SoC

  "Spend your life waiting,
  a moment that all do not come.
  Well, don't waste your time waiting.

  -Springsteen

• Connecting two cisco ESW 500 series switches.

  Hi Experts,

  I have a basic knowledge of the network and need help.

  I have two switches cisco ESW 500 series and I want to connect with each other.

  Q1 # what type of cable should I use to connect these two CrossOver switches or fiber... What is the advantage of the use of fiber on CrossOver. ?

  Q2 # what are the ports marked in the image used to...?

  

  Hi tech spec.

  You can use copper or fiber. You can use directly through crossover is not necessary. Fiber is generally more reliable, can offer a higher flow and distances much longer if needed. You will need to buy SFP modules to connect the fiber switches, which is an added expense.

  The ports on the right are shared. If you plug a FPS in the far-right for the fiber port, then the port to the left of it becomes idle. Only port copper or SFP port can be used at the same time. In addition, these ports are usually used for the uplink to another switch or router.

  Please mark this thread as answer or reply if you have any additional questions.

  -Marty

• DMP 4400 and 4305 in 5.1

  Hi Tomas

  I use DMP 105, 20 of which are 4400 and 85 g 4305. In everything we set the resolution in wide screen 1920 x 1080 high. The video sources used have been created in SD and HD. Played on the DMP, the video is not visulizado, leaving a black screen. If the DPM configured in 1366 x 768, the video OK. With web resolution 1920 x 1080 pages work well.
  If I change all this resolution dmp cause me more problems that are the web pages It Works with information and configured with this resolucion1920x1080.
  The videos are in MPEG2_TS format
  I have an urgent response because this client is to buy 100 more DMP 4400

  Claudio,

  Can you please provide the following so we can watch

  possible questions?

  Of a DMP that has this problem.  Access the

  DMP - DM Web interface and get shots of the following

  Screens:

  *--> Browser settings

  Settings--> display attributes

  * Settings--> DMP display Dimensions

  * About--> material and Versions of Firmware

  Then, download Media Info and use this tool to get the

  output of 'text' of having the video file media info

  the question.

  http://MediaInfo.sourceforge.NET/en

  Please post or set the text of the video file output.

  If all goes well, after getting this information we can restrict

  to the bottom of the issue.

  Thank you

  T.