Do the system recovery, but wish to preserve Windows updates

Similar Questions

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Hi, not really a new Member, but I'm having difficulty with the system recovery.

  I have an Acer Aspire 7741Z, I know he's older. It has windows 7 Home premium on it. I guess the hard drive went bad because I replaced it and it seemed to work. I put the system recovery discs that I bought at Acer last week and it rises to display disk copy files and looks like it loads the images file. But then it stops and gives me an error message that says "do not copy the file to the HARD drive. File G:\Images\WOP000400OENSC121103. STORMWATER MANAGEMENT.  I'm not worried about record data at this stage, just try to get the computer to work.  I don't know if I was sent a 'bad' disc or what.  Any suggestion would be great.

  Alexa

  Good for you! I suppose that insufficient disk space might also explain why the installation stopped at the same place.

  Try typing F2 when you first see the Acer bios screen to get back into the bios menu. Make sure your new hard drive is first in the boot order. F10 to exit and save the settings.

  Jack E/NJ

• NB500 - I can't do the system recovery

  Hello

  I got a nb500 Windows 7 starter and I cannot do a system recovery out-of-the-box.

  I tried "press 0 and power", the pc starts, but as long as I continue to press 0 nothing happens. When I release, it will continue to boot normally into windows. Also tried with f8, I can see the system recovery options, but there is no tool for HARD drive recovery there. I also used a toshiba recovery media Creator called program but when I start, it displays a message «there is no area of hard drive recovery»

  Any suggestions please?

  For some reason any there there no initial access to the recovery image.

  Either it is deleted or the partitions of HARD drive structure is changed and recovery tool cannot find the settings for the recovery image.
  Now, you have little problem. Recovery image installation will not work.

  You have two options:
  1 / you can try to install recovery disc original order of Toshiba - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  All readers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Re: How can I return the system recovery partition?

  I just used the cd to restore the system and on resetting my system to factory setting, but unfortunately, the system drive on the system recovery partition has been deleted.

  How will re - install the drive to restore system partition?

  Hello

  Do you mean the second Vista partition which contains the backup system files?

  This partition is hidden and usually after installing the OS from the Toshiba Recovery disk this partition must be re-created.

  I m 100% sure because I ve got my cell several times using the Toshiba Vista recovery DVDs and the hidden partition is created every time.

  Best regards

• In the System Recovery Options administrator password?

  Hello dear users of Toshiba.

  I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password.

  I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him.
  My problem is that I can't use recovery tool if I don't log in as an administrator...

  Can someone please help? Y at - it factory default password?

  Thanks to you all!

  Hello

  To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it.
  But first some basic information:

  Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option.

  To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue.

  So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option.

• The system recovery disk - how do without floppy drive?

  I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

  However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

  Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

  Any help is appreciated!

  Hello Christine

  If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

  You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

  All that s!

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Could use a little help from the system recovery

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Sdallnct wrote:

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Hello

  Here is a link to the system recovery with much information.

  Your operating system runs from your C: partition. D: is the recovery partition.

  As far your Wi - Fi connection... going to try Google chrome or another browser to see if you can connect. There is a little bug in IE (I guess that's what you use) which may prevent it from connect to web pages.

  You have probably a Trojan or malware on the system. Try to go to www.ESET.com . Look on the right side under quick links and use their scanner online. It will find all things 'wrong' that is on your system and delete, if you may of course. As far as I know, they are the best in the business. Everyone has a favorite and this one is mine. I have install on the PC of the client frequently and for three years have never had a client complain about viruses, Trojans, adware or malware.

  Do not update your pc had SP2 before having to operate satisfactorily and have done a Windows system restore point.

  post your results (positive or negative) here in your thread so we know how it works for you.

  Kind regards

  ERICO

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Cannot access the System Recovery Console invalid password

  System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations.  However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works.  I loaded 'ophcrack LiveCD' and found that the password is .  I tried to use no password and this also fails.

  What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console?

  Thank you.

  Hey Ron,.

  I finally got some time to focus on this and learned something that could explain the difficulties you encounter!

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this.

  Sorry it took me so long to find! I hope that answers your question!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation