dot1x behavior 2

Similar Questions

• dot1x system-auth-control on 62xx and all port/traffic goes down?

  Hello

  with three VLANS, and now presenting only certain ports that I do the dot1x:

  RD (config) #dot1x # system - auth - control enable

  RD (config) #aaa authentication dot1x default # spot within a RADIUS to RADIUS

  RD (config) #interface ethernet 1/g1 # bind it to a port

  RD #dot1x (config-if-1/g1) auto # config dot1x port-control

  I assumed dot1x must be forced/enabled on port/int per basis and before it's done there's no dot1x, but it seems that - dot1x system-auth-control - does not wait for anything and everything stops instantly.

  Is this desired behavior?

  And if yes then how introduced little by little dot1x, looking fixedly with an ethernet port that are configured as here:

  1/g1

  Flow control: enabled

  Port: g1/1

  Belonging to a VLAN: access mode Mode

  Operating parameters:

  PVID: 1

  Capture filtering: enabled

  Acceptable frame type: no label

  Default priority: 0

  GVRP status: Disabled

  Protected: disabled

  -Other - or ITU (q)

  Port 1/g1 is a member of:

  Rule of VLAN name evacuation Type

  ----    --------------------------------- -----------   --------

  1 by default not marked by default

  Static configuration:

  PVID: 1

  Capture filtering: enabled

  Acceptable frame type: no label

  Port 1/g1 is configured statically:

  Output name rule of VLAN

  ----    --------------------------------- -----------

  Prohibition of VLAN:

  Name of VLAN

  ----    ---------------------------------

  A lot! Thank you

  L.

  OK, you can implement other dot1x controls without having them no effect on the switch until the "dot1x system-auth-control' is given.

  I will certainly take a look at your other post.

• Sierra: Changed the behavior of file Finder selection

  After upgrading to Sierra I can't select files in the Finder using the keyboard as before. When you try to select multiple files using SHIFT and arrow keys, it simply does not work properly (if you've experienced, you know what I mean).

  I already tried to remove the com.apple.finder.plist file in my Library/Preferences folder and reboot, nothing helps.

  (An example of the problem is on this post to Reddit: https://www.reddit.com/r/mac/comments/54caqk/sierra_changed_finder_file_selectio n_behavior_me / )

  Post edited by: DiGrifter

  Yes same behavior here with Sierra.

  Best thing to do send your feedback via http://www.apple.com/feedback/macosx.html apparently if 100 users report the same problem, it will attract attention. Yes, 1 down, 99 to go

• El Capitan Email Dock behavior

  Since the upgrade to El Capitan by clicking the Mail icon in the dock to open is no longer e-mail in box/mail-program. Instead clicking on the mail icon opens more recent open email (reading or writing). To access Inbox icon to the dock 1. no emails can be open or 2. must, do a right-click and select Inbox of all electronic files open (reception + mail box).

  It is a departure from the behavior of previous dock icon that opened the Inbox by a simple click - and would send selection on right-click. As someone who has generally 10 to 20 emails open/minimized this is embarrassing.

  Searched the forums or councils, but most have been consumed w / other, more important challenges of e-mail > upgrade OS. Is there a change of adjustment that can be made? Or terminal entrance? Is this a known issue?

  Any direction most appreciated.

  Thank you. G

  Hello, GUUU.

  Leave your post, after that you have improved your MacBook Pro to El Capitan, the Mail app does not work as you would expect. Instead to open the Inbox, it opens up items left open the last time it used. I'll be happy to help you.

  OS X El Capitan: Quit apps -in the menu bar, when the application is active, choose App name > Quit App. For example, choose Mail > Mail to quit. Re-open again all holding the SHIFT key. This clears the cache of the application Mail make you it opens correctly.

  Try safe mode if your Mac does not start -start your MacBook Pro in test and in safe mode. Start in safe mode is a great way to make sure that everything starts correctly. Then, restart your Mac normally and test here too.

  Thank you for using communities of Apple Support and take care!

• The scrolling behavior is not smooth after update to Mac OS Sierra

  After that the macOS update Sierra the scrolling behavior has changed, does anyone have same experiences?

  I can still scroll trough a Web page without a problem. I mean the scroll with 2 fingers on the touch pad or scroll with the magic mouse gesture.

  BUT: In trying to slowly scroll through long lists of selections, just answers touching on fast movements, not on the slow change.

  Steps to reproduce:

  Open a Web site like twitter and go to preferences. Go to the time zone list, open it, and scroll through it. Can you move the cursor to line by line?

  You can also move to http://www.doyouspain.com/mietwagen/ , select a country like the Spain a try to SLOWLY scroll list.

  (I just discovered: the list of operating system at the end of this page shows the same problems with PCMCIA)

  I found this behavior using "Parallels Desktop". I can't scroll the documents most as before the update.

  Hello!

  Please open the accessibility, to increase the scrolling speed move the slider from slow to fast (from left to right).

  A screenshot for reference.

  

  Thank you!

• Behaviors can be used on the margins of the text?

  Motion 5 5.2.3

  Final Cut Pro X (10.2.3)

  OS X (10.11.6)

  I have the text on which I want to use the behavior of the 'Link' parameter on the page layout > margins > left margin. Margins does not however seem to create keyframe or behaviors. Is there a way to link the left margin with a source parameter?

  Some parameters are not able to bind.  Margins, width, height, etc.  Put in a feature request.

  http://www.Apple.com/feedback/motion.html

• The random crazy cursor behavior

  I have an iMac (27 "3.5 ghz i7 QuadCore - 3 TB FD - 4 GB NVidia GTX - Yosemite 10.10.5).

  This is the mouse cursor has recently started to jump and clicking randomly. I searched the internet and this Council extensively, and then I find a lot of those who suffer from this problem, I can't find a coherent solution.

  • This happens regardless of the mouse I use.
    • It happens with No mouse and no keyboard.
  • He can't start, but starts happening after 5 minutes and gradually gets worse.
    • Think this is heat, I installed TGPro to monitor the temperature; nothing seems to be very hot.
  • I have reset NVRAM and SMC.

  Are there other causes/solutions possible for this behavior? It makes the computer completely unusable, of course.

  Thank you!

  Have you blown dust lately?

  All 3rd party extensions you are running?

  EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.

  http://www.etresoft.com/ etrecheck

  What other devices are attached?

• iOS 10 Mail: moving Messages, inconsistent behavior when you tapoterez folder icon

  iPhone 6, iOS 10

  I see inconsistent behavior when I try to move a message in Mail from in the message.

  In previous versions of iOS, during playback of an e-mail message, I could tap the icon of the folder at the bottom of the messages, and which would lead to the top of the hierarchy of the folders for the email of the message account. From there on, it was just a matter of tapping on the file I want to move the message to, and he settled there the message and look back to the Inbox display (or the folder view I moved this message of).

  In iOS 10, when I hit this folder icon, two things happen: it happens the same thing I described above, or sometimes, rather than see the hierarchy of folders, I see three buttons slide up from the bottom of the screen. The top button allows me to move the message directly to a folder in my account called 'Action' I created (I don't know why he chose this particular file to the default value for this button - maybe because it is first in alphabetical order of all my folders created by the user), the second button says "Another mailbox" and when it takes me to the hierarchy of the mailbox as described above, and the third button is a Cancel button.

  I can't understand what dictates which of those two things happening. I tried again and again on a bunch of different messages. Some do happen, some do the other thing happens, and sometimes I'll have a different behavior in the message even if I try again later.

  I prefer the old way. But I could get used to the new way, if I could at least choose what default folder appears in the first box.

  Anyone else seeing this?

  Someone knows how to change the default folder in the first box of this new process?

  Thank you!

  I seem to have solved the problem on my own. I went to settings > Mail, and in the "Threading" section, I have disabled "Complete Threads."

• Weird behavior of Safari Dock icon

  For several months now, I noticed a weird behavior of the Safari icon on the dock.

  Note: I have the Safari Dock permanently icon in the dock if the application is running or not for quick access.

  With open Safari, after periods of inactivity or after the awakening of the mode standby, the icon will lose the small black dot on the bottom that indicates an active application.

  By clicking on the icon or a .webloc file reveals that Safari is still active, but because the icon does not animate as it does when it is launched.

  How can I fix and when Safari * is * open its Dock icon indicates that it * all the time *?

  Probably also related...

  All too often, after similar as scenarios above, Safari actually leave - all on its own.

  How can I fix this too?

  Safari has also been freezing quite often lately have to be re-launched or sometimes requiring a restart of the computer system.

  Something is not.

  Go step by step and test.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2. Quit Safari if it is open.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library', then 'Caches.

  Find the folder "com.apple.Safari".

  Right-click on "com.apple.Safari" and select "move to trash".

  Restart Safari.

  3 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Close the Finder window.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• change search behavior

  The latest version of Firefox is back the search behavior so that you have to click on an icon to search engine after typing your text. I got it so I could choose a via the drop down menu, search engine and then press ENTER. The setting I changed a browser.search.showOneOffButtons = false and it still has this value, but it doesn't seem to work. I'd appreciate any help.

  According to http://www.ghacks.net/2015/12/16/how-to-restore-classic-search-in-firefox-43/, you can use the Classic theme restaurateur module.

• How can I change the new behavior of the location of the drop-down menu on the subject which the url comes first?

  Since the upgrade to FF43, the address bar behaves differently. When I type a letter, URL that contains this letter. FF42 the first result would be any url, I visited the most, that contains this letter in its url. Now in FF43, it's always a url that starts with the letter I typed. Often, these are not the same. I now constantly, click on the wrong entry because I'm so used to everything fast click on the first person by habit.

  If the url of a site starts with the letter I typed and is also the site that I visit most, it now serves as the results! For example, if I type the letter H, my first result is: 'visit hardocp.com', and directly below there is an entry: "www.hardocp.com. This result of 'Visit hardocp.com'everything is new behavior that I want to turn off.

  Also, the deletion of an entry in the address bar does not seem to work (one that appears first, still and always starts with: 'Visit [url]'). I pointed out the entry and press DELETE on my keyboard and it disappears. I then my url most visited my first new result. But when I can cool off and come back on the address bar and type a letter, the entrance is back! It's infuriating.

  How can I go about fixing this?

  This is a new feature in Firefox 43. To turn it off to do this:

  1. Go about: config in Firefox
  2. Click on the I'll be careful button
  3. Locate the Boolean browser.urlbar.unifiedcomplete
  4. Change the false value

  Note: You may need to restart Firefox for the changes to take effect.

• Weird behavior of Firefox in Facebook when scrolling down

  Hello

  My Firefox has a weird behavior when I open Facebook and start to scroll, I have attached two images, first image is when I open facebook, everything is ok (I dimmed the contacts), second image is when I start scrolling down, you will see square masive black with blue navigation. That happens only when firefox is "enlarged" and not with windows. I also try to disable all addons or run firefox in safe mode I have also reinstalled it and the problem is still there. Have any suggestions, which could be bad, also if forgot to tell you that any information not hesitate to ask and I will it provide.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Behavior of toolbar button broken in WYSIWYG in the latest version of Firefox desktop

  We use a WYSIWYG editor for adding and editing the content of some Web sites that support us. With the latest update of Firefox, toolbar buttons to clean up the contents of the Clipboard as RTF or plain in gray text when the cursor is placed inside the editable text box. This bug is not exposed in any other browser and does not appear in the previous version of Firefox.

  ---

  MORE INFORMATION

  • Toolbar buttons do not disappear when the page is loaded; they can still be clicked to clean up the contents of the Clipboard until the cursor is placed inside the editable text box. While this will not break our editing experience if we could be guaranteed that our site editors have always been paste content into the empty text boxes, we cannot make that assumption. Therefore, the ability to place the cursor within the editable region before clicking on the toolbar buttons is essential and the disappearance of the buttons is a bug.
  • Listed above, this behavior has been isolated as being only present in the Firefox browser, and only on the latest version of Firefox. Is attached a screenshot of the correct behavior, toolbar buttons disappear not when you click on the area of editable text in Google Chrome.
  • When there are several areas of WYSIWYG text on one page, they are the object independently of the other. That is, clicking in grays only editable text one area on the buttons of the toolbar for this particular text box, and others remain clickable until the cursor is placed within their respective areas of editable text. Clicking outside an editable text area does not "restore" buttons to a clickable state. Once they dimmed, they seem to stay like that, unless and until the page is reloaded.
  • Other buttons on the toolbar, such as those to insert/remove the hyperlinks, or make the text bold or italic, are not affected by this bug.
  • Error was replicated on OSX Yosemite, El Capitan of OSX and Windows 7 Enterprise

  ---

  DESCRIPTIONS OF SCREENSHOT

  • chrome_latest_noerror.PNG - shows that the error does not place on the latest version of Google Chrome
  • firefox_latest_error.PNG - shows the buttons disappear when the cursor is placed in the editable text box
  • firefox_latest_noclick.PNG - shows that the buttons are clickable in Firefox when the cursor is not in the edit box

  Adding image seems to not work right now. Here's the URL for an imgur Gallery: https://imgur.com/a/dHp8Y

  Wow, you have a lot of scripts on this page... I see the behavior that you see, test on Windows. (By the way, I had to use HTTP instead of HTTPS.)

  Edit: No errors appear in the browser Console to indicate a problem when clicking in the editing area, so disabling seems to be design in the editor, perhaps caused by a detection or object/property/method version detection problem.

  Your version of CKEditor is quite old now, it seems to be from early 2013 3.6.6; This series had its last updated July 15, 2014 (3.6.6.2).

  The current version is 4.5.4 and when I use the demo, the button works normally: http://ckeditor.com/demo

  I don't know how to tease the difference and patch your current CKEditor. The ChangeLog mentions bugs for the gluing of the word several times: http://ckeditor.com/whatsnew

  Can update you?

• Stop the scrolling jumpy behavior

  When I initially opened a window that has a scroll bar (Finder, Safari, Mail), it momentarily displays the full view of the content of the window at the top.  However, after a very short time and after that I stopped any scrolling, content jumps down from a line (or section) content, lost the material at the top of the window.

  I can scroll upward to view the content at the top of the page, but when I take my hand off the mouse, after another moment that content breaks down again to lose the sight of these bits.

  For example, on this forum, the black line on top (with different options 'tab' white text) is lost.  In a window of Finder, in list mode, this is the first line of text that jumps out of sight.  In Mail, it is the first item in the list that moves from view (for the list of messages) and it is the upper bits of the message in the messages pane.

  It doesn't all the time but often enough to be annoying.  FWIW, oddly enough, I don't think I'll have this behavior when I force a scroll to the top of the window using the trackpad.

  Is there a way to stop this behavior to jerk upward?

  Greetings, keriah!

  Welcome to Apple Support communities.  From what I understand from your description, it looks like at any time, you open an application that displays more content of the screen and you stop scrolling, your screen is "jump" to the next page/section/line by itself without any intervention on your part.  I can certainly understand why you contacted us about this!  I would find it difficult to read what's on my screen, if the content "jumped" every time I removed my hand my mouse. I'd be happy to help in any way I can.

  First of all, you don't mention what version of Mac OS X you have.  Update software on your MacBook is always recommended and would make sure to have the latest versions of Safari, Finder, Mail, and other applications included in Mac OS X.  The following documents will help you back up your MacBook and update your operating system:

  Use Time Machine to back up or restore your Mac

  Update the software on your Mac

  You mention using a mouse, and that this behavior of the screen will not occur when you use the trackpad integrated.  Is an Apple mouse (wireless Magic Mouse or USB model)?  If it's a third party mouse (not made by Apple), then you will need to check with the manufacturer to see if they could have updated drivers for it, or if there might be some settings that cause this problem.  Another useful troubleshooting step would be to try this in a user account 'test' to see if it happens there, too.  Who would tell us if the question is to scale the system, or simply in your account.  Use these instructions to create a user 'test'

  How to test a question in another account on your Mac.

  From your MacBook in safe mode can help determine if starter or connection elements are originally your scrolling problem.  It also removes the font caches, hiding the kernel and other files of the system cache.  Title of the article says it's to El Capitan (OS X version 10.11), but the instructions are the same for other versions of OS x:

  OS X El Capitan: start in safe mode

  Have a great week!

• Need to maintain the icon in line with end of line to write on behavior

  Need to keep an icon that is aligned with the end of the line of movement 5 write on behavior

  I used speed custom behavior to write on to keep the time between specific waypoints proportionally compared to the times of real satellite data. However, I can't understand a simple way to get the icons to move at the same speed as the write on behavior.

  This video shows how they sometimes go ahead and sometimes behind.

  https://youtu.be/jVz9aGIwnEE

  For D24, I used the behavior of trajectory, with the selected geometry and the Bézier path that I used to write it on the behavior in the well. I used markers for the correct waypoint times. Then I used the customized calendar for the end of the line for the behavior of writing to hit points of interest at the right times.

  For D25 I just use keyframes to the waypoints. Can I add image key intermediary to make things line up OK but it is very tedious to do.

  Is there an easier way to get the icons and write them on the behavior to align correctly, or another behavior or any other method I should use to do this? I have some valuable experience with video editing so I might well do something very basic the wrong way.

  may I suggest a different approach?

  Start with your icon (somehow remembers me a bird of Pray Klingon, sorry)

  Animate: Press REC, playhead set at time index, move the position icon...

  

  Thus, icon bird moves exactly at each x / y and precise at the time...

  Now, create a new group "Trail", paint a small circle, make a particle

  

  now, Magic 1st part:

  Set rate of high birth, 300, 500, 1000... determines the "softness" of the line trail

  the life value max

  set the speed to zero - we do not want a cloud of points...

  Finally, Magic pt 2:

  Link group (behavior) the Position of the track to your bird...

  

  In doing so, the transmitter following the bird - and leaves a trail behind it:

  

  How to start?