Double screen of Windows 7, second screen works not properly

Similar Questions

• Touch screen works not properly

  Hello forum,.

  I have TouchSmart HP ENVY 15-j021tx. Recently, I refreshed its OS and installed HP OEM Version 8.1 of Windows.
  Now, it is completely up to date and I noticed that my touch screen works like a mouse.

  When I type in a point it click here - it is normal but

  When I drag something (e.g. scroll on the screen of the metro), it doesn't scroll but the mouse pointer starts to move with my finger

  Similarly when I slide up/face down starts to move through a Web page the pointer, but the page does not move.

  This really annoying because I can't use any gueature like the edge for Windows 8 charms or switching between applications.

  In info PC it says "no pen or touch input is available for this view.

  Here is the image of the Manager of peripherals and PC Info.

  

  So, I got this problem fixed.

  In devices, Interface devices Manager, there is an additional device installed namely Touch USB peripheral of entry.

  Uninstalling this device does everything is normal.

  The charms and each touch guesture now works normally.

  Thank you

• Touch screen works not properly (yoga 700)

  There are parts of the screen (near the Center, slightly to the left) doesn't react don't not to my fingers.

  For example, on the desktop, when I touch a place for 5 seconds and remove, it will act as a right click and a menu will appear.

  But near this spot, it does not respond at all or respond partially (as if I touch the repeatlessly part, she will act as drag if I move but don't wor as good lclick matter for a long time, I leave my finger there) or worse are circles where my finger is supposed to be like 2 cm lower.

  Software problem?
  Or in need of repair?

  Edit: Nevermind, google autour and someone suggested restarting and it seems to work.

  Good thing this is not permanent, should have done it sooner.

  The problem was actually the ghost/Ghost Touch problem.

  Google and you'll find a fix for Yoga 3 which works with it too much since they use the same screen.

  Lenovo should have fixed before shipping it that since he already discovered in an older model long enough with the same screen, but they were simply screwed too lazy and used the same buggy one.

• HP G60 screen works not properly, a blue tint on it

  Hello everyone, I hope I can get help with this on my laptop because it has a weird blue tint that has appeared on the screen when a friend knocked at the back of my screen with a wooden mallet.

  The tint still allows me to work it's just boring.

  If I turn the screen at an angle, it turns back to normal

  I have reason to believe that it is a hardware problem or something wrong with a backlight.

  The graphic card works fine (I can play Starcraft II, Battlefield 1942 and other games perfectly fine).

  I can connect the laptop to an external monitor and that works very well also.

  If somone can help me with this that would be great.

  Also if it is to be dismantled then that would be nice.

  Data sheet:

  My HP G60 laptop: G60 - 443 CL

  OS: Windows 7 64 bit family (updated for Windows Vista 2 years ago)

  No Messages

  No changes made to the system at all, it was spontaneous.

  Hello brenner.

  You have a problem with your monitor.

  Here is a link to your service manual that has the part number for a new presentation and instructions on how to change the display. Page 4-23

  Your screen is a 16.0 "diagonal HD HP Bright (1366 x 768) display.

  Here is a link to HP parts store to check the price on the new display.

  I would like to know how everything goes.

  Nice day.

• Windows 7 mouse from works not properly

  I was in the Middle using my computer & my mousepad on the computer has stopped working. (this is not an external mouse pad but the internal buffer itself)  I have Windows 7, all other components, including the mouse on the key finger? works but the touchpad does not work.  Thanks in advance for your help. -Wendy

  It is possible that some hardware components has failed.

  What is the brand and model of your laptop?

  The following can be difficult to do without a mouse (I don't know what 'mouse on finger key' means), but if you have a 'Windows logo' key on your keyboard, try the following:

  1. Press the Windows logo key.  This should open the start menu.
  2. Type devmgmt.msc (typing should appear in the search box) and press enter
  3. Press the TAB key.  This should highlight the name of your computer at the top of the Device Manager window.
  4. Use the down arrow key to navigate entries in Device Manager.
  5. Which, if any, references show a caution icon?
  6. If an entry has a warning icon, press Enter and report the text in 'State of the device.

  You have an external mouse available?

• DELL C2665dnf - the touch screen works not.

  DELL C2665dnf - the touch screen works not.

  How can I get a quote for the replacement of the touch screen?

  Am in need for a screen. Can help me

  Hi Rickellv2,

  You must call Dell technical support or use the chat for your country for information.

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark.

  Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark. Tried to remove drivers and rebooted in safe mode, the same still seems a conflict somewhere, but how do I find and fix it please.

  Try to remove the UpperFilters value. by following these steps:

  Copy and paste the following text in Notepad and save to a .reg file (save with the .reg extension and give a name like fixcd.reg):

  First create a system restore point, and then double-click the saved .reg file, add to the registry and restart the computer.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}]
  "UpperFilters" = -.
  'LowerFilters ' = -.
  

• When uninstall windows 10 my defrag works not (pro 7)

  When uninstalled windows 10 my defrag works not (pro 7)

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can try to manually initiate:

  Click Start > computer > click with the right button on your hard drive > click Properties > Tools tab > optimize drive.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Double screen does not-version 2015

  Probably simple, but a little weird. Updated until 2015 SG and not my link dual screen does not work, at all. Cannot get to show an image on my second monitor.

  -Connected via hdmi

  -Windows 7

  -Works thanks to dynamic links of PP

  -Double display settings:

  Dual display Output: enabled

  1920 left

  Top 0

  Width 1920

  Height 1080

  
  

  Although it was in 2014, but now, it won't work. Any ideas?

  Just to review...

  The two main numbers are 'related' between the upper-left pixel of your screen "primary" (as defined in the configuration of the Windows operating system for monitors) and your secondary display that will be used to monitor the program out.

  The numbers that you're showing would be for a second monitor to the right of your primary monitor to 1920 x 1080 and the 'level' with her. What is shows Windows or software of your video card when you ask him "show monitors" kind of thing?

  Neil

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• touch screen works not (windows8)

  I can't find a driver to update my touch screen. Since I put windows 8 on my all in one pc, the option of touch screen does not work. When I search for a touchscreen Windows driver, what it says that it cannot find an and to go to the site (which is hp) and watch. I've looked everywhere for a way to solve this problem. Any ideas out there for me? Help, please!

  Hello

  I had the same problem when I upgraded my TouchSmart 320-1030. I got the touch screen works in this way:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click on the touch screen driver (in my case, Voltron NextWindow touch screen - your driver may be different).
  5. Right click and select Disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  Another option:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to display adapters to expand the list.
  4. Click the driver.
  5. Right click and select Disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the driver.

  Another thing: I had to reinstall the NextWindow Voltron touchscreen. I went to HP drivers and downloads page, download the WINDOWS 7 driver, which was under pilot - Original.