double-sided indesign book numbering

Similar Questions

• Pro Jet 8620 how to print double-sided A5 for the book I'm writing

  I am a first place writer and my guardian forces me to use the A5 format. I was assured only the HP Jet Pro and a brother could printing double-sided a 5.I havetried printing without result. I ealize I beyond the use of date for modern technology, but I'd be very happy ay advice on A; is it possible on this printer? B:how is it achievable? Best regards, Warrigal.

  Hello

  Just the printer does not support this. Please check the specifications following, listed under handaling paper > paper sizes supported:

     http://support.HP.com/us-en/document/c04085902

  (No "tick" under pass duplexer).

  Kind regards.

• HP envy 5535: Hp envy 5535 only print double-sided

  I am trying to print on my printer assignments. My printer prints only even if I select double-sided printed double-sided. I have a fairly new Mac Book Air with printing software downloaded on it. When I try to print a word form document there not a box to select or clear double-sided printing. I can't find anything online that will help you. Help, please!

  Hi @ariana_sav6,

  Welcome to the Forums of HP Support!

  I see that you are unable to stop printing double-sided on printer HP Envy 5535. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. We need to locate the settings.

  Reset the printing system:

  To start, I'll have reset you the printing on your Mac system. Please click here for instructions on how to perform the reset. When the Web site open follow the steps under'Resetting the printing in OS X Lion system "that the steps are the same for Mac OS X 10.10." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. Do not add your HP Envy of return at the moment.

  Check and repair your Mac disk permissions:

  Open Macintosh HD and go to Applications

  Go to the Utilities folder

  Open disk utility

  Select the hard disk volume, you use (usually on the left)

  Check the permissions of the drive

  Once this process is complete, select Repair disk permissions

  Manually install the driver package: https://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Please click here to manually download the Apple update package for v3.1 HP printer drivers. Once the site opens, select the download at the top button. Follow the instructions on the screen to install the driver package.

  Check the Apple updates:

  Go to the Apple

  Select System Preferences

  Select software update

  Click Update now

  Install your available updates

  Restart your computer

  Add device:

  1. click on the Apple menu and then click on System Preferences.

  2. click on print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the plus sign (+) and then remove the printer.

  4. click on the plus sign (+), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or using Print and then select the name of your printer on the shortcut menu. Make sure the driver HP Envy is selected. Select the name of your printer in the menu use

  6. click on add to add the printer to the list. Do not add the AirPrint driver.

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• 7410 double sided printing

  Well here I am again with printing problems.

  I have a Mac Book Pro using OS 10.9.5, Mavericks. I managed to solve my problem of printing and scanning with the help of Shlomil. In addition, it helped me some time ago with a problem printing double-sided. Now I find I have the same problem with printing face double but am unable to follow his advice (which fixed the problem the last time)...

  Now, the print face area two does not appear on the menu drop down print! So, I went to the following (using the latest tips provided Shlomil)...

  "1. Verify duplex printing accessory has been installed correctly." To check this open system preferences and go to the Printers & Scanners. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides. »

  However, when I select "Open Print Queue" there is no 'Printer Setup' in the tab menu. So I can not check the "accessory of HP print two-sided (duplexer) is checked" (unless I'm doing something wrong). I and #2.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click on show details to see all available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  I skipped the step above, given that the print face area two does not appear on the print drop-down Menu (and no window available extended printing).

  I went #4.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  Now, I do not show a "binding" type in the page layout"selection on the menu drop down, etc.

  Shlomil suggested if it doesn't reset the printing system. I'm really scared to do because I have 3 printers and a scanner in different places. When I chose the lower reset printing system to the low said he would remove all... all printers, scanners, fax machines, etc.

  Is there a less severe alternative? I'm puzzled! This all worked before (two-sided printing, printing/scanning). The only thing I can think is at this moment I have correct permissions to update or a newer operating system.

  Help, please!

  Well... I can't believe!  Please ignore my ramblings.

  I have mucked in the things of the printer and 'Printers and Scanners' system preferences, selected "Options & supplies" rather than "Open Print Queue" and then choose "Options". The accessory "HP" box of double-sided (Duplex) printing lies. It has not been verified. Although I don't know how he got uncontrolled, I checked that and it fixed my problems.

  Thanks again

• C6280 issues with double-sided printing

  Hey all,.

  For some time (we are talking years) I didn't relize I had a duplexer on my machine. I was doing the old-fashioned way: print a page, open the drawer, this page, return the program prints the next page, etc... One day I was flipping autour and saw print on both sides. I thought: ' Eureka, the answer to all my problems. " Evil.

  After discovering that I had a duplexer, I was eager to try duplex printing everything and it seemed to work great.

  However, lately things have been a bit wacky. For example, when I try to print something double-sided in Word, I normally go to the screenshot and select "print on both sides, back on the short edge," but lately the result is only the last page being printed. The printer prints the last page, it reverses and spits out a blank page on the other side. If a document that has 5 pages, for example, will result in page 5 only printing. This is also true for the PDF and PowerPoint. I have not tried anything else, or I don't remember anything else being sucessfully printed double-sided, I print from these 3 programs frequently. So as a solution, I found that I can go to the printer properties and select "printing double-sided (Duplex)", then "manual" selecing. It was also great to work for a period of time, print the odd pages and then I would feed them manually in the status bar. still a better solution to what I was accustomed to years (above).

  That was until last night.

  I tried to print a PowerPoint Presentation two-sided document and some of the pages are out, that in a single page had a normal top margin, the following page may have a slightly larger margin, the page after that might a slightly smaller margin, etc... I thought that maybe the Fed just book funny and tried again. Results were the same. I tried to print a PDF file which also resulted in some pages being off. I opened the drawer, made sure the paper was stacked right and was about 20 pages, took off the duplexer and made sure the wheels were spining properly, unplugged the unit for one minute, etc... Nothing worked and it seemed to get worse because I lost paper trying to get to the bottom of it. Some of the pages even started to be printed in the correct order, as in page 1 and page 3 gathered front/rear instead of page 1 and page 2 combined front/rear. So I thought that it must be in the software.

  I unplugged the printer, all completely uninstalled, rebooted, ran a registry cleaner, rebooted, downloaded the latest version of the software of HP and performed a clean installation, rebooted, installed the latest driver from HP, rebooted. I did this last all night and the approach seemed to fix the problem with margins. However, I still go on printing double-sided manually. Then this morning I got since I solved a problem, the automatic feeding through the duplexer should work. No joy, 'thing' has been up to his old tricks, only spitting the last page, as if the rest of the pages never made it to the printer. I even went to Devcies and printers > printer properties and I tried to put the duplexer as "installed". Seems that he likes to go back to "not installed".

  

  Someone at - it ideas as to what my problems are?

  I am running:

  Windows 7 x 64

  4 GB DDRM

  Intell Core 2 Duo P7350 2.00 GHz

  Office 2010

  Adobe Reader 11.0.06

  I use HP paper

  Network (but the problems occur also on USB)

  Major changes other than windows updates not normal.

  Thanks in advance for the help!

  Well, I solved the problem. I played around with a bunch of parameters and magically it just started working. Do not know what settings or a combination of parameters does the job. Looks like it was just a fluke. Lets hope it continues to work properly because I like having the ability to print double sided without manually moving the paper.

• Affecting HP OfficeJet Pro 8610 without borders on and printing double-sided "return on the long edge.

  I want enabled no border and return on the long edge, I got another printer installation.  But on the 8610, I get the same dialog box and chose of ' keep this setting, and I will change it later ", but it does not allow me to have the two settings in this way.

  I have some WONDERFUL NEWS!

  The 8610 printer (and it was the printer 8600) replaces my HP
  OfficeJet 9110, which I've owned for about a decade.

  My "existing" Linux computer cannot print on it.  (I have a very old)
  Version of CUPS and at the time I gave it - and I don't have a lot of time
  -I have not been able to install a more recent version.)  But, my most recent office
  Computer Linux is a system of 20 of Fedora.  (And, the goal is to have the most recent
  Linux Desktop become my Linux after I get everything copied and
  configured for it).

  Last week, I installed a new version of HPLIP on it.  Is not only
  It give me the ability to print in duplex/duplex, but it also prints
  without borders!

  I am able to print without margins and double-sided printing, using half of the book
  Once again!

  I'm happy with that resolved, now that I've installed marked HPLIP!  :-D

  Barry

• How to print double-sided in In Design when certain sections have an odd number of pages?

  I'm new to In Design and I'm doing something that seems pretty basic and the difficulty in finding ways to do it and I have not found anything in the Adobe Forum or online that responds to this situation.

  I'm working on a document that is divided into sections, with page numbering starts at Page 1 for each section.  I have mirror image layouts for odd pages and even masters - for example, the page number is on the left on even pages and to the right of the odd pages, as you would expect generally to see on a double-sided print, where in a workbook or a workbook, the even-numbered pages are on the left and odd pages are on the right.

  
  

  I print the document from my computer to a printer that supports double-sided printing.  I don't see any option in the file / print window to two face impression, so I put this option on the printer itself by using the [Setup...] button at the bottom of the window.  It works - I'm printing on both sides of sheets of paper.

  For the moment, the first section is 3 pages (two blocks spread with the first page, one with the other two).  The next starts of section by number 1 on the third page spread (one page) and continues then a two-page spread - as expected.

  That is the problem - the first page of the second section is printing on the back of the last sheet of the first section, rather than on a new sheet from the front - so when I put it in a binder, the odd pages are on the same pages on the right and the left.  Whenever I have reached the end of another section with an odd number of pages, she rotates on itself again.

  There is a workaround solution manual I found - browse the document and add a blank page at the end of each section that has an odd number of pages (and check "print blank Pages).  But I have to do every time I feel that I am adding new pages and add/remove blank pages the number at each change of sections.

  I can't believe that In Design does not provide a way to make this work correctly, I'm sure a lot of people have had this same situation, and I hope it is something simple that just, I have not been able to understand...

  Help! (Thanks!  B ^)

  Frankly, it's a feature of the years, I tried, and I expect a professional page layout application to have. Something on the order of "duplex respect page layout." It would be very useful when printing only part of a document that happens to start with a page of pairs.

  I do catalogs in the sections, and each section begins with a left page. When duplex printing a section given, I must print this page first separately and duplex then the rest. Kind of pain and should not be necessary.

• Problems of pagination for the file InDesign book

  I'm working on an e-book. I need all the chapters first on their own page, then I broke my original document in separate chapters and created an InDesign book file.

  FYI, I work in CS5.5

  I have read/seen information about pagination for a book file and I put in place so that the numbering of the pages 'continues the previous document. But each chapter, I bring you, begins with page 1 in the file book (instead of continue). No matter what I tried, I just can't get the numbering to flow continuously through the book.

  Would not be a big problem, since my e-book will not have the numbers, but when I save this file book as an ePub, which converts a single chapter (depending on which is the source of style) - not the entire book with several chapters.

  Can someone help me understand what goes wrong?

  Transferred to InDesign EPUB forum.

• Print double-sided of odd number of pages

  I have Adobe Reader 10.0.2 instalied on my iMac Mac OS with a Canon Pixma iP4200 printer 10.6.7. Since the installation of this version of the player I came across a curious problem with PDF files print double face with an odd number of pages.

  For example, a three page PDF printed double-sided file. The first page prints first, then pages 2 and 3 are printed double-sided. This leaves a blank page on the back of page 1 that is INCORRECT and was intrigued. Standard double-sided printing should have pages 1 and 2 back-to-back and page 3 with a blank page on the back.

  All my other software on my iMac prints only odd numbered file double face properly. It's only the 10.0.2 player who has this problem and would like a solution.

  I found a bug in the player software?

  Concerning

  Stone AKA DaftBrush

  If you google "Adobe report a bug" is the first hit, you get:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Why the print window Firefox does not provide an option to print double-sided?

  My HP printer is able to print double-sided, which saves paper, but the print window of Firefox offers no possibility of double-sided printing. (I recently spent IE, this fact.) I have to do something to add?

  You can post a screenshot of what you see?

  The relevant printing for your printer options appear under properties AFTER you click Print and select the printer to use.

• How can I print double-sided?

  On my laptop that is running Windows 7, there is a checkbox to print double-sided. My new printer (old we died in some of the excessive rains induced sewer failure) duplex automatically, so I like to use this feature whenever possible. However, when I try to print on my new computer under Windows 8 (old computer met the same fate as the printer), there is no place I can find to influence the dialog box offer me duplex printing. Help, please.

  Are your Windows 7 and 64-bit systems of Windows 8? There are often differences between 64-bit and 32-bit device drivers. In addition, brother says that it offers its own pilots in addition to those included with Windows 8.

  The following may be useful:

  • Brother Windows 8 support page: http://welcome.solutions.brother.com/bsc/public_s/id/os/windows.html
  • Downloads of drivers and firmware HL-2270DW: http://welcome.solutions.brother.com/bsc/public/midlink3.aspx?prod=hl2270dw_all & lang = all & src = DOWNLOAD

• HP officejet pro 8610: double sided printing - brochure

  I'm trying to print a booklet from a pdf file.  When I print double sided printing pages in reverse.  Front of the faces of the page to the top and back of the page down.

  How can I get to printing, so that I can form a booklet?

  Hi @roza,

  I'd love to help you with your duplex settings. Looks like you will need to change the short edge binding on the long edge. I found something that might help with these settings: with long edges and parameters of short edge duplex printing.

  I hope this helps.

• 6500 a more don't stop printing double sided

  Good afternoon

  I have a HP Officejet 6500 has more and I can print the mac computer. All of sudden my printer ONLY print double-sided, but only one of my macs. I checked all the settings and even if it is not set to print double-sided, it continues to do so.

  I need help ASAP!

  Thank you

  MMD

  Welcome to the MMD31 forums,

  I understand that you are only able to print double-sided to your JO 6500 has more. I will do my best to help you with this.

  Please try:

  • Mac OS X: how to reset the printing system
  • Restart the computer
  • Re-add the printer (make sure that you add the HP driver and not the AirPrint)
  • HP Officejet 6500 a Plus e-All-in-One - E710n drivers (Select your Mac OS X, click on Next, drivers and you are looking for the full functionality Driver download)

  I hope that helps!

  Happy Monday