Double Win XP and Win 7 boot system__

Similar Questions

• WHT is the win xp boot process

  WHT is the win xp boot process

  Hello, Nithya subramanian,

  Windows NT startup process

  The Windows NT startup process is the process by which Windows NT 4.0, Windows 2000, Windows XP and Windows Server 2003 boot operating systems . In Windows Vista and later versions, this process has changed slightly; See Windows Vista boot process.

  http://en.Wikipedia.org/wiki/Windows_NT_Startup_Process

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• Satellite C50-B-13N - error "Reboot and select good boot device."

  Hi all

  My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

  Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
  seem to have accidentally deleted the data on the disk.

  I have now repeatedly received the error message "Reboot and select proper boot device."

  I tried the F12 approach to , but my Start Menu does not have this option.

  I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
  In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

  Please give us a solution.
  The laptop is 4 months old.

  In addition, how can I start the process of an application under my warranty?
  A dissatisfied customer of experience to date.

  Kind regards

  CGI

  I seem to have accidentally deleted the data on the disk.

  Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

  I guess you have not created such recovery media as recommended in the user's manual.

  Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

  Means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Long boot time and the gel boot drive selection window

  Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).

  My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.

  I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).

  I always have Apple Care left. Help, please. Thank you.

  Hi Herojeff02:

  It seems that you have some SSD problems.

  Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support

  You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.

  See the following links: OS X: on OS X Recovery - Apple Support

  Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.

• Satellite C660: message: reboots and select good boot device

  Hello

  I dropped the laptop today literally a few inches from the ground, it slipped from my hand as I was placing it on the ground. He fell flat.

  Now I see the message "reboot and select proper boot device."

  I tried a few different options that I read, and I see the HARD drive in the BIOS F2 thing or whatever it is called. If it is recognized, but I can't seem to move in the message. Any suggestions?

  Thanks in advance.

  PS I will need clear instructions, I'm not stupid, but I need to explain. I don't understand some of the pieces.

  Thank you

  Hello

  I think that your HARD drive is bad.
  I think that you have not checked it correctly in the BIOS.

  Please go to BIOS once more, by pressing F2.
  Now on the first page, you will see date, time, details of CD/DVD drive and you should also see the details of the disk (size, name)
  You see that?

  Otherwise, the HARD disk is not initialized by the BIOS and this means that, because of the fall, the HARD disk has been damaged.

• I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  Hello

  1 are. what other applications you referring?

  I recommend you to uninstall Service Pack 1

  I suggest that you follow the steps mentioned below to refine the question causing third-party software (as applicable).

  Step 1:

  Test the issue in safe mode and check if the problem persists.

  Step 2:

  If your computer very well in safe mode functions, I would pt you your machine ├a State clean startup in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart your computer in normal mode

  See also: slow PC? Optimize your computer for maximum performance

• V3 - 771g S8 i7. V2.28 BIOS how to disable secure boot mode and allow to boot from usb/dvd

  Hi people,

  Recently my laptop w8 shared with my brother get sick. So I decided to get out the trusty old diagnosis

  USB and dvd, you know, ubcd centos ophrack. Much to my dismay, I couldn't start any of them. So after some faffing

  everything on the net, I was able to boot/secure boot / disabled, which meant I could f12 at startup in the Boot Manager.

  Unfortunately, the drama is over. Kindly listed boot manager internal hard drive, but not bootable usb or dvd connected.  so I thought, I'm going to be cunning and change the boot order of start. Yet once the monster of Bios Acer jeeringly laughed at my attempts to

  take control of the material, I dared try control simply because I happened to pay a substantial amount of money to acer.

  So, it seems, the only option I have left to change is boot/boot mode / (boot uefi/legacy). So what I need to change to restore the boot control, is to change legacy BIOS uefi? Who will install the w8 cack?

  Also what happens if I want to replace the hard drive with an ssd in the near future, is not not to work?

  Oh, I tried to get help from the enamel of acer, their response said essentially bios/uefi is isn't a problem acer because it is sw and realized

  What seemed like a pay per minute service.

  Skills of good customer Acer.

  Any help appreciated,

  Hello..

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?

• Stops on his own computer and will not boot from the CD

  someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd?

  * original title - someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd? *

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  See you soon.

  Mick Murphy - Microsoft partner

• error after update of the code and cannot re-boot

  After being asked to download an update from Windows on the Web and then to restart my computer two days ago, since then, I could not restart. I tried all the options available to start, restart, safemode, guest C (which I didn't), networking, you get the idea. I'm not savvy computer even if when I get to that screen I ' don't know how to get a "command prompt". I select options and they stop is to ' CHKDSK checks the index / an unspecified error has occurred "or! 0xc0190036! XXX/47373 (wer.dll)"or" Loaded: \windows\system32\drivers\crcdisk.sys please wait "in no case have I've been able to release one of the screens, once they get to this point, did I was able to reboot Windows in any mode whatsoever. I'm in Germany at the U.S. military running on a laptop with Vista. Help!

  1. how to record data, if necessary,

  2. put it back to factory settings.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner