Drive hard IDE does not appear in windows Explorer

Similar Questions

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• External hard disks do not appear in Windows Explorer

  I have Win 7 SP1 64 bit Home Premium. Recently, four external drives are not recognized in Windows Explorer, but show in disk device manager &. They all work well and are recognized in another PC. I have tried different methods to solve the problem without success. I unplugged all the USB ports and the power supply for the discs off the PC. After a reboot, one by one, I turned on the readers and attached to their USB cable. Plug & Play worked well and I could open the files in the first drive. The player showed in disk management, the Manager of devices and Windows.  As soon as I installed the second disc, one disappeared from the Windows folder but remained in Mgt of disc and Device Manager. It's the same thing when I installed the readers of 2nd, 3rd and 4th... After the shutdown of the PC and turn it back on, none of the drives show in Windows, but has shown in managing disks and Device Manager.

  I also tried Mr. Fixit. I uninstalled all the USB controllers. I activated turn on AutoPlay. Nothing has solved the problem! If she can be of any consequence or relevant to this problem, the internal drive in my PC now has been cloned from a smaller drive about a month ago. Any help to solve this frustrating problem would be greatly appreciated.

  Thanks, Dave

  Vignesh Hello,

  Thanks for the reply.

  I'm sorry for the late reply.

  I suggest you try the following steps and check if it helps.

  Remove the external hard drive of the computer.

  b. Click Start, type regedit in the start search box, and click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (c) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

  d. in the pane of details, right click 'LowerFilters' and then click 'remove '.

  e. click 'Yes' when prompted.

  f. close the registry editor and restart the computer.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Peripheral USB does not appear in Windows Explorer

  I can't browse the files using my USB. Devices and printers displays the device is correctly installed. But doesn't always show is not on my computer.

  Hello Ahmed,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted device drivers or missing.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check the issue. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please assign the drive letter to the USB device and check.
  Refer to this article:
  https://TechNet.Microsoft.com/en-us/library/cc753839.aspx?f=255&MSPPError=-2147217396

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 7. I add a hard drive not formatted to my computer. He is recognized in the BIOS and Device Manager, but does not appear in windows Explorer. How should I proceed? Advice please.

  Windows 7
  HARD disk: Samsung Spinpoint 250

  Make a right-click on the icon my computer

  Select manage in the 'breath' menu

  In manage, select disk management

  from that, you can then complete implementation, partition and format the new hard drive.

• Drive hard internal does not appear in Device Manager or disk management, but IT IS there.

  According to disk management and Device Manager, I don't have a C in any case, a HD partition at all. (I mean on an internal hard drive) So of course, I have a HD since im typing this now. Laughing out loud. the computer seems to know it's got a HD, because it starts very well, but he can't see it. In addition, I can see it in Explorer and see all the folders and files, but that's all. Everything works as usual. What can I do to fix this?

  I have Windows Vista Home Premium, 232,88 GB Hitachi HD, NTFS, 4 GB of ram and sound on an HP laptop. I tried to restore windows, ran several antivirus scans and scans of mal-ware/spyware/ad-ware - all came up with nothing and all updates, still the problem persists.

  Have you updated your BIOS? This could be a long shot, but have you tried to run the tool it Fix ?

• My drive external hard usb does not appear after login

  Hi could someone help because I bought a disc external hard usb and when I plug it in it does not appear on my laptop at all and ive tried troubleshooting and also right-click on computer in going on the management and also clicking on disk management, but it doesn't appears not on there also could someone help please thank you

  Hello Gabriel,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your laptop?
  2 have you tried to connect the player to another computer?

  I appreciate your efforts to resolve the issue.

  This problem can occur for the following reasons:

  -The USB driver is maybe damaged.
  -Corrupted registry keys can be the cause of problems with the connection to your external hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Disk hard online, but not visible in Windows Explorer

  Hi guys, I need a little help.

  Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.

  My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.

  In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)

  I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?

  Here's some more information about the system:

  OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)

  BIOS: Phoenix AwardBIOS review 1.0.18

  Motherboard: Foxconn G33M02

  CPU: Intel Pentium Dual-Core E2140 1.6gHz

  Memory: 3072 MB DDR2 SDRAM

  First HARD drive: 250 GB Hitachi SATA sister

  HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")

  GPU: ASUS EAH4670

  And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649

  And I just use a SATA to Molex cable I found to convert the power.

  Thank you

  Hello

  Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.

  I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.

• HP P6130Y: Secondary hard drive does not appear in Windows Vista - 64 Bit

  I installed the second SATA drive in my HP 6130Y, a 1 TB WD Black. HE appears during startup, is displayed in the home page of the BIOS password HP PC-Doctor and SMART BIOS tests.

  But he does not appear in Windows Vista 64-Bit.

  My current setup is configured as follows:

  • SATA1 - Seagate 750 GB SATA drive
  • SATA2 - DVD
  • SATA3 - new WD 1 TB drive.
  • SATA1 controller is set to RAID.

  Thanks for any help you can provide!

  Hello

  Go to Administrative Tools--->---> Disk Management in the computer management and expand the screen entirely.

  Now, look for the new drive, right mouse click on it if you see initialize and then format the new hard drive.

• my wood recognizes my drive hard ide but my dosent XP windows

  my wood recognizes my drive hard ide but my dosent XP windows

  Hello

  (1) you are able to start in the Office?

  (2) you get any error message?

  (3) who is the manufacturer of your hard drive?

  (4) don't you make changes to the computer until the problem occurred?

  As work all about check if the hard drive is detected in disk management, and then try to configure the disk. To do this follow the steps mentioned in the article below.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

  Important: You can also change the hard disk boot priority in the BIOS and check if it helps.

  Hope this information is useful.

• The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even format.

  The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even

  format. What is my next step

  Check Device Manager to see if it appears.  You may need to install a driver for it.  If so, you should be able to get from the NEC web site.

  Good luck.

• Styles does not appear in Internet Explorer (in dreamweaver preview)

  Styles does not appear in Internet Explorer (in the preview of dreamweaver) Please help with it

  03.08.2016 - 06.26.39 - library of Ilkhom

  Displaying a link to a screenshot is useless. The problem lies in your HTML / CSS. Without seeing the code, no one may provide assistance. Post the URL of your website here so someone can take a look to try to work on the problem. Also mention which version of IE the cause of the problem.

  If you use elements HTML5, IE 8 and earlier do not support HTML5 style it without the html5 shiv.