Driver Robot

Similar Questions

• I called the driver robot that comes up constantly with required updates and it asks me to download this for my epson printer and dell touchpad.

  What is the driver robot, and how did get on my computor. Is it safe to download updates and will be charged. Not sure how this me on my computor. If not necessary and it is a scam, so how do I get off this icon my computor. Please help because it's driving crazy me!

  Hello gabby6,

  driver robot is a control software from your PC for outdated drivers. It is a commercial software similar to "Driver Detective" or similar. You can use it to scan your PC for updates of pilot. It shows where to find the latest updates and if you pay the cost, you can update all of your drivers. You must have downloaded by yourself once without realizing it.

  You don't need this! You can use the 'Device Manager' of windows to search for updates of driver by yourself.

  You can remove this program in "Start-online Control Panel-online programs". Search for "driver robot", mark it and select "Uninstall".

  Regards Dirk

• With the help of Robot Driver or driver Fetch after Windows 7 upgrade

  Just upgraded my laptop from Windows Vista to Windows 7 (64-bit).  Trying to get new drivers for Realtek devices and others, I am faced with downloads "Driver Robot" and 'Driver fetch' who want to register and PAY for the updated drivers.  Are these legitimate programs?  How can I get around them?  I don't have to pay to replace the drivers that came with my new computer!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.

• Model Officejet 710

  I need driver for the vista operating system, can someone please let me know where I can get it?

  Thanks buddy but last night that my problem is solved. I tried to find more dry thanks to the Software Driver Robotot and somehow the driver installed and works fine now. now I don't know that xp drivers worked or software driver robot does something, but it happened suddenly.

• TL2000 vs sequential Mode random playback mode

  We just bought the TL2000.

  In reading through the guide of the user (page 118-119), it defines the mode 'random' and 'sequential mode '. My question is... What is the difference?

  I ask because I am unable to discern when one would be used over another.  Here are a few questions that I left with after reading the definitions.

  1. If I choose "Sequential Mode" and the loop, it says that it allows backup operations without end without user interaction.  Well, this seems attractive. However, caution indicates that only 1 player will be used.  So, just to clarify, does the 2nd drive would be effectively useless?

  2. by reading the questions of different forum on two separate issues, I saw the recommendation to activate sequential mode and activate the shuffle mode.  What are the advantages and disadvantages of using one over the other?

  3. in what scenario would be an organization wants to choose Random instead of sequential, or vica versa.

  Thank you!

  Hello JustTryinToGetItToWork,

  The biggest difference in 2 modes, is that when working in sequential mode, it will be in order when entering the slot 1-24 support & will use only 1 disc. Also when running in sequence mode, there may be problems get the robot in the TL2000 to load the media in the drive as & most often, that you end up loading media manually in the drive & eject manually.  Now when you use the Random it media mode is used in any order, but uses blank media first, then will use media that has been written on front. Most of the clients Configuration it TL2000 in Random so that they have full function of both drives & robot.

  Please let us know if you have any other questions.

• Cannot open Word or PowerPoint in an e-mail message

  I bought RegServe and Driver Robot and now I can open is no longer attachments in an e-mail message. I run Vista 32-bit.

  What do you expect, you have installed two applications allmost gueranteed to destroy your system.
  Pilots are obtained from your site if OEMs like Dell / HP or a laptop or a generic PC from various hardware manufacturers sites.
  Unless a driver update is required to provide greater functionality, or cure a bug to know, leave them alone. If it isn't broken don't fix.
  Do NOT use winupdate for drivers not more.
  In what concerns the 'cleaners' If you don't know how to clean manually and is rarely necessary, you don't leave things alone.
  Like it uninstall these useless, destructive programs and run a repair using your office CD Office

• Button 'play-stop' CS4 does not

  OK hope that someone might be able to help - I am trying to get CS4 work on my partners machine which is a VGN Vaio Sony - AR49G - plug here - http://VAIO-online.Sony.com/prod_info/VGN-ar49g/VGN-ar49g.PDF

  A bit of history...

  Recently installed Prime Pro CS4 under vista (running CS3 previously on vista with no problems).
  

  CS4 running within days began to have conflicts between AVCHD and DV when editing in the same timeline - have been recommended to upgrade to Windows 7.  Upgraded to Win 7 32 bit.  It's the line of conduct:

  -After the upgrade from Vista to Win 7 32 bit, got the Win 7 updates;

  -Update the drivers (Driver Robot to detect the required driver updates);

  -Suite CS4 uninstalled and reinstalled;

  -Downloaded CS4 updates...

  Things seem to work fine now except screens of 'play-stop' button (or space bar) in the 'Source' and 'Order' does not work.   Can scroll by moving along the timeline bar, select points etc and output... OK, but the movie will not play in the screen of the source or program.

  Have you checked the WAV, AVI, AVCHD... none will play.

  Closed the premier Pro and first open items on the same machine and it is working fine - can play the same images...

  I've updated all the drivers who seemed to think necessary for the upgrade EXCEPT Intel ICH8 Family Driver Robot... the upgrade has failed and I was not able to locate more drivers up to date on the web... and found a note on my travels that they do not require the upgrade anyway.

  http://communities.Intel.com/message/72149;JSESSIONID=6169690E70B02BD075E4C1131A7ACC85. NOD e5COMS

  Help please!

  No problem.

• 15 Pavilion: Pavilion Windows 10 Driver Update quick access keys

  Hi people!

  The "SHORTCUT KEY" that towers power button has a small RED led installed which is supposed to light up when you press on to show that the speakers are turned off, however after an update of the Lord knows what, like Microsoft to preserve 'secret' is now to win 10 updates and get it if you want it or not, the RED Led has stopped working which I hope is a software problem that can be solved by installing the latest version of the driver HOT KEYS so...

  Using the "HP Support System" the "Robot" told me to go on the Support Page, get my model of laptop recognized then choose updated driver and select "HOT KEYS", except when you get to the drivers there is nothing that looks remotely "HOT KEYS DRIVER" in the list of all driver updates.

  Does anyone know where this "object", or what I should expect for HP Support human out of bed on Monday morning and answer the question?

  I hope the people of HP who put the "How To" pages would check them until they commit to their Web pages!

  Thank you

  Life is a journey, not a destination so make the most of it so that you can!

  Hi again,

  After completing the steps gave you me and the Chipset driver and then, installation by running the installation Realtek in Administrator Mode. For some reason, I found myself with a Microsoft HD Audio Driver installed, which do not operate the RED Led!

  Then back through everything in your instructions for the second time, but the Chipset driver is back with an intallation error, so I just ran the Realtek sp73189.exe.

  For some reason that gave me a message telling me when I had done was no installed Audio driver!

  I then ran it again and after re-boot Led RED rest would not work, so I went into Device Manager and see "Update Drivers" offered that I stressed the Realtek HD Audio, and I was rather surprised to see that there is an update as of 26/01/2016 6.0.1.7730 driver Version.

  It was automatically installed and left for a few minutes, then low and here are the RED Led which is now "glowing" Fortunately started working again.

  Know not why the first two 'impossible' attempts or if the Realtek sp73189.exe had been replaced by yet another update, but at least now everything is going well until Microsoft eventually make another 'Dump for update' secret and screw something else!

  See you soon

• Satellite A210 - 11 p PSAELE - display driver has encountered a problem

  Hey guys.

  I've updated my display driver at the latest.

  My laptop is the series of psaele A210 - 11 p with the graphics card from ATI 2600HD. Some time ago I got a red screen of death.
  When I rebooted my computer laptop, everything looked different, the Office seemed a bit simpler (color wise etc.; the detail who was in the bar start...)

  In any case, after that, I get rates to around 5-10 on really keen (Microsoft Flight Simulator 2004) when I use it to get above 25 frames per second.

  I'm now using Windows 7 from the original Vista preinstalled. When im in the gameplay, color blocks begin to appear on the screen, scattered on the ground and 3d objects. After about 30 seconds in the gameplay, the desktop freezes and then everything goes black. When my image back upwards again, a message pops up saying that the display driver has met with a problem, or something in that sense.

  So I took it for repair, but the guy said that he saw nothing wrong with the graphics card.
  I also have a laptop cooler but I have to admit, in gameplay it gets HOT.
  I have
  tried to use the robot to pilot of the program to check for outdated drivers, that I might have.
  After updating all the drivers the problem continues to exist.

  Can anyone help?
  Thank you.

  Hello

  In my opinion, the graphics card overheating while game.

  This could be possible if you want to use the non-Toshiba graphics card driver!
  3rd party pages don t graphics card drivers support GPU overheating protection and this could affect the GPU feature!

  I think it's problems because you also mentioned that this laptop gets hot while running a game.

  What to say; back to Toshiba graphics card driver and check if cooling operation modules correctly remove the dust and debris of grilles and fans to ensure better cooling performance.

  Good luck

• HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

  Hello

  I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

  Here are my specs below:

  10 64-Bit Windows Home

  Processor: AMD A6 - 5200 APU with Radeon HD graphics card

  8 GB RAM

  Audio: Realtek High Definition Audio

  I'm running out of options. All the solutions to the current problem would be great, thanks.

  Hi @REL1983,

  Thank you for the update.

  I'm glad that the store has been able to solve the problem for you.

  Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

  Thanks in advance.

• Pavilion dv6-3120us Windows 8.1 plus his robot

  Hello

  I have a HP Pavilion dv6-3120 us portable and, when installing Windows 8.1, I have constant audio problems. Every time I play something on iTunes, Windows Media Player or Youtube and I have access to any Web site, sounds becomes slowed down and robotic-like until the page fully loads. I tried different browsers already, with the same results. In this case, if I use headphones or speakers of my laptop. Is there a known way to solve this problem?

  The HP Support Assistant said that my audio driver is a high definition Audio Device HdAudio.sys, Version 6.2.9200.16653

  Thanks for any help

  Thanks for your response! I've read some of the threads in this forum and decided to try to install the sound driver of my laptop in compatibility mode for Windows 7. The issue has been completely resolved.

• With 232/16 PCI driver problem

  I had a hard drive failure on a machine that communicates with several robots using RS232 and have the old PCI-232/16 186492 B - 01 Board I am getting down to work. This is not the most recent of the PCI-8430/16. He has worked previously on Windows 7 but now I can not for the life of me find the windows drivers. This machine is before my time here at the company so I have mentions on the old installation. Same computer, but with a new drive, new install Win 7 and LabVIEW 2016. I don't know that the previous version of LabVIEW has been 2014. The only way that I can not find is to intall OR Serial XX. I installed 15.0 NOR-Serial, but it may lack the suitable driver for the PCI-232/16? Note that registration on the Web page for NOR-Serial 15.0 lists PCI 232/16 in the list of devices. Maybe I do not a good thing to get the driver for this device windows? The other option is to replace the card with a serial port external USB multi adapter - there is another similar fixture who has this road and I know I can get this to work.

  Make sure that the device is associated with the NOR-Serial driver in Windows Device Manager. Pilot tab in the Properties window should list National Instruments as the driver provider.

  If it isn't, you will need to update the driver manually. The driver should be placed at the C:\Windows\System32\drivers\NiSerU.sys

  If it still does not work, you might want to try the device in a different PCI slot.

• How create/get ColorPal driver for LabVIEW?

  Hello!

  I am a french student in England and I'm working on the Starter Kit 2.0 (with DaNI Robot). My company wants to turn the feature of prevention of obstacle (thanks to the ultrasonic sensor) into a follower of colored (thanks to the Parallax ColorPal) line. So I want to program in LabVIEW but I don't really know how to get the driver ColorPal or screws to connect between the sbRIO 9632 and this color sensor. I use the same yarn as the ultrasonic sensor to connect the ColorPal.

  Thanks in advance for your help.

  Concerning

  Kevin

  Hey Kevin,

  I took a glance at the ColorPal documentation and it seems that it is programmed using e/s series. As you can see below:

  

  You will need to do, is use series found below the palette of e/s of instrument LabVIEW VISA and functions to communicate with your ColorPal. I recommend that you download their website ColorPal documentation and study the syntax of the commands that you will need.

  Also for reference here is a good place to start when programming of VISA.

  Kind regards

• Driver for Allen Bradley Compatlogix or ControLogix

  Before the project I'm looking for a Lookout driver who could work with CompactLogix or ControLogix Allen Bradley PLCs, Ethernet/IP protocol. There are 5 pilots AB Lookout, I will need a driver that works fully with these robots.

  Please, no server OPC of AB, no serial...

  Any recommendation?

  Thanks to everyone who sent me their ideas and work around. I was looking for a direct driver in Lookout here talk CompactLogix AB and ControLogix PLC with Ethernet/IP protocol. But it is not to direct the driver to him, seems to me that the only way is using OPC Client/server like you guys, so I'll check the box as a response (or response) and close this topic.

  I thought that the OPC of Lookout server will be good just to talk with other computers of Lookout, but I tried with Lookout 6.02. I had to put DCOM, and it worked! All the variables of abnd tags server-side appears in the client side!

  Lookout is in itself a big OPC server, if you know how to use it.

  Thank you all.

  NOTE: The client mutual FUND of Lookout is real, all there need is a GOOD OPC SERVER, that's all.

  Rudy Lopez.