DRM-71093: stack empty.

Similar Questions

• KKT response: there was an error trying to get the status of the job. 1: the server returned an error of CloseJob treatment: empty stack.

  In response to KKT:

  "Just to give my opinion on it.

  When you try to restore a backup file of Version, you get this error.

  This is a known fault.  The problem is caused by missing values in properties such as AddedOn, AddedBy, which can occur when a version is copied with "Clearly changed properties" selected.

  It is a known bug, but to work around - mix version in a new empty version, which will fill the properties of "ChangedOn". You can then save this version and restore it.

  Thank you

  "~ MICHEL ~".

  KKT thanks for your response.  Unfortunately, this error occurs on all Versions in our Test of DRM environment. Recently, we have copied on the Production of DRM scheme to the Test environment. So... not sure what causes this error.  Any other suggestions?

  Why you open post for answers, please answer on the same post.

  also I will offer you to Open SR with Oracle parallel until you found the answer.

  Close the other threads.

  Thank you

  ~ KKT ~.

• User profile of Stack overflow is not displayed correctly

  User Stack overflow profile page is displayed wrongly, hides an empty space at the top of the page and some info.

  I see what you mean. It seems that the dropdown that says 'Summary' push this content to the large block to the right (sometimes you can see a small piece of it on the right edge of the page). This problem does not occur in the (2.3.4) stock Android browser.

  If I use a Fennec useragent string in the User Agent Switcher extension, I can reproduce the problem on a desktop browser (13 Firefox beta 4). The drop down menu is floated in a container that uses 100% of the width of the screen. The next element floats upward alongside < select > rather than fall under this one, because this next item is not a specified width or the minimum width.

  StackOverflow can solve this problem by changing the CSS to include a rule of compensation:

  
  .inner-wrap {
   	padding: 5px;
  	overflow: auto;
  	clear: left;
  }
  

  However, as end users, I don't know if there is something we can do.

  This problem appeared in the sites for years, and it seems unlikely that Firefox will change the way it handles the floats to work around developers who forget to erase. (Guess as to what the developer must have wanted was something that IE is long, but I think even Microsoft starting to require developers to pay more attention).

• Remove DRM AAC music files bought protection

  Remove DRM AAC music files purchased protection is necessary in order to make the files available to play with Sonos.

  1. In iTunes, select my music
  2. List of songs showing "kind".
  3. Select a song with 'genre' "Protected AAC audio file"
  4. Click on the «...» ' and select 'delete '.
  5. The song is removed from my music and appears in the Recycle Bin
  6. Empty the trash
  7. In iTunes, select iTunes Store
  8. Under music, select bought
  9. The song removed at step (4) above appears
  10. Click the cloud/download
  11. In iTunes, select my music
  12. The song downloaded in step (10) above appears
  13. AGAIN, the song has been downloaded as "Protected AAC audio file".  It is a problem, since it is my understanding AAFC Protection is supposed to be used by iTunes.

  How can I get a not protected version of a song I already bought?  I have literally hundreds of songs protected that I want to use with Sonos, and I'm NOT even paying for them.

  Thank you

  Chris

  Yes, I have a game of iTunes subscription.

• Calculator command stack 2014 tiara

  The last update of Diadem 2014 doesn't seem to store the previous commands in the calculator command stack. He always seems to be empty. Is there a setting hidden somewhere?

  Thank you Walter,.

  Now, works great.

  Happy new year!

  Karoline

• Graph turns out to be empty.

  I have attached my vi. Waveform graph turns out to be empty, despite the fact that there are changes in my outings.
  Need help.

  Thank you.

  You seem to have an allergy to the straight lines! Those tortuous behind other objects work just as well, they make it much more difficult to determine what is happening.

  The structure of stacked sequence can be replaced with a control panel and a loop for. As crossrulz said, you need a delay between commands. Read the manual for your instrument.  You can use the error cluster to ensure the execution order, and it will let you know if you have errors. If the climb in canoe speed change while the program is running, this command must be out of the loop.

  Lynn

• How can I reset a default (empty) table call other than nodes?

  I used the reset all failing to invoke the node and the specific call node in order to reset the two tables in my Subvi each time the Subvi is run in my program (main VI). I use the Subvi perform steps, but the steps I take continually stack on the other. I have these as outputs wired berries so I don't think I can grab an empty array and call her nodes are enabled (and no code return error!) whenever the Subvi is executed, but these two paintings is not reset to their default value, empty values at the beginning of each passage. All ideas are welcome; I appreciate your help. Thank you!

  I managed to get almost what I wanted by replacing the nodes of comments that I used (to build the two tables), with offset, and then initializing registers Maj records at the beginning of the program. The problem there was that the encoder I used for the measurement of the angle would start up where it left off (at 400 degrees rather than 0, even if it was a new set of data). On the other hand, he deleted the previous data set, which is what I wanted. I think I'm able to work with it; The first measure can be 0, so I just need to use the last measure known as an offset or something... Suggestions are always welcome; Thank you all for your time!

  Edit: For the sake of simplicity I just moved initializers of the nodes of the property to the farthest loop and it does the same thing.

• OfficeJet Pro L7590 AIO - using ADF for scanning Photos stack

  I've seen other posts along this line, but they have not answered my question.  I want to put a stack of photos in the ADF Document (CAD) and have them automatically scanned in separate JPG files.  I have not been able to get this working. Actually, I can't get the scan function to accept any document in the ADF.  I loaded an image in the ADF and click the scan button on the L7590 only whether scan the empty dish without pulling the photo.  I got the same result when I used the HP Solution Center software.   Seems like the L7590 should be able to do this... I just can't figure how to make it work.  I really don't want to load the dish with one or several photos at once.  One of the main reasons I bought the L7590 was to replace an old scanner with flat SCSI HP autonomous because she didn't have a document feeder.

  PS - I know that the ADF works because I made copies of a document multi-page placed in the ADF.

  Thanks in advance for any help you can offer!

  Hey DexterM,

  I solved my problem!  I think it was a pork/configuration installation/CPU issue.   I thought that my call to the HP support line a few days he's solved a unrecoverable Setup error (Error 1335 if you are interested), but given the other problems I saw, I decided to remove all the programs and re-install.  After copying the installer on my drive hard vs installation from the CD, I was able to go beyond the fatal mistake and seemed to all software installs successfully.

  Then, after you fix pork CPU issue the HP solution Center Software ran quickly and I was able to set the parameters of configuration of scanner for the first time.

  This allowed me to enter the help of scanner manual (the manual supplied with the scanner is very rudimentary) and I was able to get the correct configurations.  I then tested with 3 photos in the ADF and it worked - put each photo in its own file.  Woo Hoo!

  Thanks for your help and I hope that this thread will help others - IT IS POSSIBLE to SCAN MULTIPLE PHOTOS INTO SEPARATE FILES VIA THE ADF!

  Topcorner

• 6 curves 3 plots stacked tracing?

  I have a few filtered x, y coordinates z which I currently plot to a waveform with plots stacked chart. How can I include data not filtered on the respective plots?

  That is to say. 1 x route view filtered and unfiltered together, is filtered and unfiltered together etc.

  

  Hey Graham,.

  Interesting question! It took me a while to understand, but it is certainly possible - even if the solution is a bit a violin.

  

  Please see the attached code. To impliment your feature, I had to...

  • Group all plots (in this case 4) into a single cluster, and send in a graph "stacked."
  • Resize the legend of plot to show all 4 locations.
  • Right-click on each item in the legend, navigate to The Y scale , and then select which window you want to show the plot (1-4)

  This means that 2 of the windows will display 2 plots of each, and 2 windows will be empty. Unfortunately, I was unable to 'hide' a window - so that's where the "Violin" comes from - I just resized and repositioned each of the 'windows' to effectively only showing 2 of them in our stacked chart.

  I hope this has been helpful Graham,.

  Best wishes

• My computer says that my drive is empty when it is not...

  I have a toshiba satellite l300 with windows vista and a dvd - r with pictures on it, and whenever I try to watch the photos told me that the disk is empty, but if I try to put something else on the disc it then told me that the disk is write protected.
  I know for a fact that the photos are on the dvd because I can play with my Xbox 360 and also my dvd player, and I also watched them at my friend using their computer.
  Does anyone know why my computer says dvd is blank when it clearly isn't?
  I did not burn the dvd, that it was given to me so I don't know anything about how it is burned, but I know that the photos ARE out there and I really need to find a way to get them on my computer.

  Hello

  Some discs will not work on other machines to due to different alignment problems. Other discs work on your machine, or just one or a few? If only a few then the tolerance of the machine and your unit are on opposite sides of the authorized spectrum. You might even find some discs burn you work on another computer when those burned on it will not work on your. This is because your drive is in fact several devices in one box and the tolerance of each part can be defined in different. Readers can be re-aligned however normally it's really not worth doing.

  ---------------------------------------------------------

  If you have problems with all the drives check the below:

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack.

  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• BlackBerry smartphones, which is DRM OS?

  Hello

  I'm confused by the different versions of the operating system for the 9520. I see that some are DRM versions and some are non - DRM.

  I know that DRM stands for Digital Rights Management, but I don't see what that has to do with a phone OS?

  Could someone please explain that to me?

  Thank you very much

  Graham.

  You must have another DRM OS installed on the PC.

  In this DRM OS, delete the files in the JAVA folder.

  Now, install the OS on the PC nodrm. Once completed, move the files in the folder nodrm JAVA to the empty JAVA drm folder.

  Now, remove the OS of PC nodrm.

  Run loader.exe and installs.

• Improved 8 GB to 16 GB of memory - DRM system more

  I have updraded my system under Windows 7 Pro 16 GB memory. Now, no obstructed DRM content will run without an error message empty of meaning. Decommissioning of 8 GB restore all functions concerning the management of DRM. How to work around this problem (restore the rights with the new memory)?

  The error indicates that my system date is set on XXXX which may be incorrect. This is posted within Windoows Media Center when you try to view the streams Netflix and Netflix web pages when viewed through a browser. WMC will not play protected either recorded TV shows (his convinced the computer in not the one that recorded the show). The error message is attributed to a problem with Silverlight (called the Netflix forum), but Silverlight is up-to-date.

  Remove the extra 8 GB of ram returns the system to normal. Conclusion - a change to 8 GB in size of invalid memory the DRM license on the computer. I need to force licensing DRM to refresh and update my system while maintaining rights '' I already have.

• Everything on my DVD is removed, but he says that is not empty.

  I have a DVD RW drive that is empty, but he says he has 1.11 GB 4.38 GB free. I wonder why it says that. If there is a fix could you please help. I prefer not having to buy a stack of DVD when I need one.

  Sorry if this is in the wrong category/topic.

  Hello

  Your computer came with any type of 3rd party DVD burning software like CyberLink or something?

  You might be able to erase its contents with that if they are available...

  There is also a lot of 3rd free third-party programs to burn DVDs as well, if you want to try that route.

  In fact, you'd be much better off just buying a small package of blank discs DVD + R or - R...

  The RW discs are sometimes not acceptable as a bootable drive.

  Even if they burn properly, the machine starts sometimes from them.

  Same thing with rewritable CDs...

• Integration of DRM/ODI

  Hello

  
  

  We use the client batch DRM to do imports, etc.  Batch files are called by ODI which will automate the process.

  I used the utility of credentials to associate a Windows user with DRM users, and when the batch files are run manually, they are working as expected.

  However, when the kickoff through ODI we run into issues "the required parameter, that username has not been provided or its value is empty.

  Is it possible to use the ODI to run batch files and does not provide the name of user and password DRM in the file?  If so, how?

  
  

  Must some configurations on ODI be done?

  
  

  Thank you

  Ross
  

  You run into this error because the Windows user that is running the agent of ODI under has no credentials set up with the customer drm-batch - credentials.exe. If I start an ODI agent from a batch file under a Windows user account that has been configured with drm-batch-customer - credentials.exe, then the client batch runs without a problem when you run a batch file containing the following text where the credentials are not included:

  DRM - batch - client.exe - url = net .tcp://boxname: 5212/Oracle/Drm/ProcessManager - op = e - xtype = E - xname = HierExport - cver = LowerCaseImportTest - pver = LowerCaseImportTest

  If I create a second user Windows however, log in as this user via RDP, and then start an ODI agent under the new Windows user account without having the credentials of installation with customer drm-batch - credentials.exe then the batch client log shows this:

  10/11/2015 12:00:51 - * start Oracle DRM Batch Client *.

  10/11/2015 12:00:51 - => error: initialization error: the required parameter, user name was not provided, or its value is empty.

  10/11/2015 12:00:51 - * stop Oracle DRM Batch Client *.

  So the problem here is that the account Windows user running the Agent of ODI under has no stored credentials. You just need to understand which Windows the ODI Agent user account runs under and ensure that it ran the drm-batch-customer - credentials.exe under this account so that stored credentials are available for the client to batch.

• Easy way to delete all the DRM configuration

  Hi team,

  We have few resources to install and so whenever a new project is, you need to delete the old configuration manually going to each objects. Wanted to know is there any utility that is available or any simple process that removes the DRM configuration and makes the application as fresh.

  I know that we can delete the schema and create new ones, but this requires a DBA help and we do not have to do the same. DBA needs time to remove the schema and the new restoration, we cannot create the DRM scheme directly. Y at - it a script that can be provided to the DBA to run and clear all the tables in the DRM schema without disturbing the important data like Dal_updates etc.

  Any other ideas are welcome.

  Thank you

  @

  Hello

  I have an idea on this requirement, which is a bit, but as far as I know, it should work.

  There will be a first activity of the side time DBA. The DBA to create two application (APP1 and APP2) ask for the first time. So both applications are now empty.

  Now, you start your work in APP1 and hold APP2 because it is safe and empty. Once your work is done and you want to delete everything he just run the copy of the application functionality and copying in APP1 APP2. So, it will copy the empty APP2 application in application APP1 . I think that this will also remove the audit tables.

  So donnot you need DBA help every time.

  The link to the copy of the application is: https://docs.oracle.com/cd/E51367_01/financialsop_gs/FADRI/ch04s03.html

  Let me know if it helps

  Thank you

  Khady Sylla