Droid 2.1 only 3 screens?

Similar Questions

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• macOS Sierra intermittently detects only 2nd screen at 800 x 600 when you reconnect

  At work, I use a mid 2014 MacBook Pro retina 15 inch connected to two screens Thunderbolt.  One of the screens Thunderbolt is chained to each other through stroke, and then connect to with love at first sight.

  Normally throughout my day I disconnect and using my computer laptop away from my desk, but when I go back to my office, I usually use my MBP with the lid closed and just use both screens Thunderbolt.

  Despite this historically configuration works fine, after a senior officer to macOS Sierra 10.12 I met a problem when my laptop wakes up after his Thunderbolt poster.

  A screen will boot correctly at 2560 x 1440, but another display will not work at 800 x 600.  If I try and manually adjust the settings of resolution for screens, I can only select 800 x 600 for posting done.

  The MBP has two ports Thunderbolt, and if I change the port on which the pair of screens is two connected, the forced swaps of 800 x 600 monitor.  Anyway, once the problem starts, I'm stuck with an abnormal low resolution screens.

  If I disconnect the two screens, one of them, then reconnect their power cycle, I still have the issue.

  If I open or close the lid of the MBP, screen MBP works at normal resolution, but I still have the issue.

  The only solution I've found now is to restart my MBP.  Then the screens work normally.

  So far, this question seems intermittent, but I met it 4 times this week since the upgrade.

  Hello, Hello 165dB!

  Thank you for joining the communities Support from Apple! Looks like that or have problems running on exnternal Thunderbolt displays the MacBook Pro. Read this article for steps to get help with graphics issues on external displays connected to your Mac. It has some great, you can try to see if you can get the second screen works properly.

  Another option you can try is in this article: How to test a problem in another user on your Mac account. This will allow you to check to see if the problem is specific to the user or the system-wide.

  Kind regards.

• I connect and portable shoot only black screen

  I connect to my hp Pavilion and it takes me only a blank black screen. I can move the cursor on the screen but can't do anything else.

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• Satellite L650D startup problem - only black screen

  Hello Experts,

  I have Toshiba Satellite L650D which is strange since the last few days.
  The problem is that it lights in general.

  Unlike other similar problems on the web, he won't go to the Toshiba start screen.
  Screen stays black! When I try first to power, I hear only a few sounds DVD player nothing else.
  When I try to reset it now button / stop for 30 seconds or more, I hear hard drive (or power) sound, but nothing happens.

  I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  . I am writing from the same laptop. If I stopped it now, it will still take me 30 minutes and many random combinations of hard reset to make it work.

  Someone suggested that the power output of the card could be a problem. can we check voltage output without fancy electrical appliance?

  Help, please. I can't afford new laptop right now.

  > I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  I'm afraid there's something wrong with the motherboard or the part connected to the mobo as RAM modules m.
  If you have not checked the RAM modules in the past, I'd recommend this as faulty RAM could affect the functionality of the laptop. In addition the RAM modules are not very expensive, so it s worth to check the following items.

  But please don t understand me wrong. I put t say there is a problem with the RAM. I said, this could be the troublemaker. So please don't be disappointed if this workaround solution would not help.

• Satego X 200 - 21U - only black screen on startup

  Hello

  I am owner of a SATEGO x 200-21 U with geforce 8700 m GT. The last time I used it, it freezes within windows. Just the backlight lights up after reboot. I have no picture, just black screen.

  Even the Toshiba sign at the start of the laptop, the will does not appear. I think my interface is broken. I wrote to the Toshiba Service several times but I have no answer.
  I think that if you're out of warranty, you are off customership... friendly service... thank you Toshiba suggestions where I can get a spare part for my laptop?

  > If you are out of warranty, you're out of customership
  This is certainly not the truth. The only difference is that you pay for the repair when the laptop is out of warranty. For me it makes sense that this situation should be more interesting for services because they earn the defective notebook computers repair.

  If there are other SPAS in your country, call and ask for help.
  In general the graphics card replacement is not possible and I do not think that you will be able to find as unique hardware component. As far as I know, the whole motherboard must be exchanged.
  Where to find the new motherboard?

  You can try to order directly by Toshiba service partner or try to find that some used one on eBay.
  Hmmmmm... I fear it won't be easy to find it m.

• Re: Satellite A300D-13 has: problems starting - starts not or only black screen

  Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

  If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

  In the Bios I have change the boot order of the sources (I can't change it much more)

  I am grateful for any kind of help.
  Thank you for your cooments in advance

  Hello

  The issue could be related to software, but also for the hardware problem.
  But first, we have to check if it s a software problem.

  You are using the original operating system preinstalled by Toshiba. Is this good?
  AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
  In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
  HARD drive recovery option can be used to reinstall and update the operating system.
  I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

  This option will start the recovery procedure and the BONES to relocate again.
  Please check if a new facility will improve the situation with Notepad.
  In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

  If this suggestion won't help you then whole notebooks material must be check by a local ASP.

• A80 - 154 does not start - only black screen with strange resolution

  Hello!

  I have a big problem with the laptop. When I start it the power led and battery LED or power plug LED is blue (depending on what energy source is used, the problem appears both!). It's normal. But you don't see anything on the LCD screen. And nothing happens. Are lit, display is not black, no sound of the HARD drive or the fan. When I connected my external 17 '' TFT, he says that there is a signal, but the screen remained black.

  The signal has a resolution of 720 x 400 70 Hz, which is a very exotic resolution and a strange frequency! Anyone has any idea what it could be? I connected no matter what USB or other device. Only the laptop with or without the battery.

  Hello

  Well, it's not easy to say what may be the problem. I think it s a hardware malfunction, but I don t know which part might have a failure. Maybe it's something wrong with a CPU or memory modules s.
  In this case, I recommend to contact the service partner. He can do some tests.

  Good bye

• P400 only black screen will not start.

  My Lenovo was plugged to an outlet controlled by a switch which, during the night, someone off my battery to die.

  So the next morning I turned on after letting it load and only the keyboard illuminated by a screen empty.

  The fan on for a brief moment and stopped.

  The only answer I get from the laptop is a beep when I unplug or plug in the AC adapter.

  I removed the battery, which held the power, trendy french adapter started and got the same result. Even after connecting the battery back in.

  I also tried to connect another monitor, but the result is the same and the monitor only records that the computer is turned on.

  How can I get my computer on without having to send to a lenovo repair center?

  I discovered the motherboard was broken. Thanks for help.

• Only online screen is magnified

  For some reason any only when I'm online my screen is magnified.  I have a HP Compaq Presario CQ56 laptop. I tried to reset the smaller display 100% and which has already been set in this way. This happen online and I hit something with the keys. Help me, I will blind you.

  THANK YOU, THANK YOU!  My screen is back to normal, my eyes are not yet... Laughing out loud. You are awesome!

• Inspiron 530 s displays only half screen via HDMI or DVI

  I have a strange problem that I'm seeing with an Inspiron 530 s that I'm trying to get up and running again.  It seems to work fine if I use the default VGA port, but if I try to connect it to a TV via HDMI or DVI, it only appears on half of the screen.  The left side of the screen looks normal (be it screens start Dell or actually in Windows).  The right side of the screen is a series of vertical lines.

  I checked the video card isn't the issue.  I swapped another video card in and it does the same thing.  Both cards work fine in another machine.  I also checked the TV working properly.

  I hung the 530 s on a normal 17 "monitor via the VGA port and I see the entire screen.

  The version of the BIOS is 1.0.0.18 that I understand to be the latest version.

  I really want to get this working, but I'm not sure what to look at this point.

  Other tests established that the 530 s as well as the 531 s (which I could test on both) must have problems with some video cards.  Once I established that the question could be reproduced on both models, I decided that this must be an incompatibility problem rather than a problem with the motherboard.

  I decided to try to get Windows installed despite the half of the screen.  Once I had Windows installed, I changed the resolution to the native resolution of the TV (1366 x 768) and the damaged screen went away.  Somehow, it was fixed even if I rebooted the machine, at this time there and I was able to navigate through the BIOS with a normal screen.  In fact, I was not able to reproduce the problem again until completely stop the machine and remove the power completely.  After that, the machine would still start with display messed up, which would remain until when you start Windows, it changed the resolution of the screen at native resolution and there again it would be "fixed".

  The video card is not really new, but I think that it may have been written in a more recent specification of the standard PCI-E that this motherboard can be expected.  If I were so inclined, I could probably find a video card that does not have this problem, but instead, I think I'll just this weird issue.

• BlackBerry Smartphones Google maps only half screen now on Storm 2

  I recently found my cards are only half of the screen, with keyboard, refusing to go on the other half. Also can not display maps in landscape mode. This has made them much less useful. I don't see enough of the card to be able to guide me. That's happened? I used to have a map full screen. I can't seem to find this topic anywhere and am unable to find any help on my BBy.

  Thanks for any help.

  Hello

  Go to Options > Applications, locate the entry of Google Maps, highlight it and press the BB Menu key.  Find the option to turn off compatibility mode, and you should be set.

  Try and let us know if this helps!

• Stuck on the second parameter to display on a laptop with only 1 screen

  My son clicked on 2nd screen only on his laptop and the screen became black we can't he come back to normal.  The screen remains black even after stop and turn it back on.  Is there a control function that I can use to go back to the 1st screen?

  OK, I fixed it.  I had to get another monitor out of my old desktop computer and plug it into the laptop.  Then I could see on the screen, we pressed cont + alt + F4, a screen side popped up which had the possibility to the pc screen, the second screen and 2 other screen options.  I just clicked on the pc screen and everything went back to normal.  I don't know how I would have fixed with on the second monitor well.

• My envy 100 D410 running with OS 10.7 produces only one screen black when scanning or copy? Help

  My envy 100 D410 had worked fine for several months.  Recently, the printer works fine but the copier and scanner only produce black and streaked color screens.  I reloaded all drivers and updates, and nothing seems to help.  Any help would be greatly appreciated.

  If the printer performs this when the copy of the front of the printer, the scanner is dead.  I'm sorry.

  Here's how to contact HP technical support: www.hp.com/go/totalcare

• Gray cloud only gray screen out and showing creative

  Hello

  I can not open CC on my Macbook Pro 2014 model. The icon in the taskbar is grayed out, and when I click on open there is just a gray white screen. I can open the cog icon to stop smoking, but preferences does not work either. When I connect CC online, it tells me I can download only the tests and not the paid version, and when I click on download CC opens and displays just the gray screen and the software is not download. I have the edition student and teacher CC. Thanks if you can help.

  Refer to the blank white screen. Sign in | Creative cloud Packer

  You can also follow: new Creative Cloud application unusable: it is empty!

  I hope this helps.

  Thank you

  Varun