DSLRA200 10 sec self-timer missing

Similar Questions

• Self-timer and Bracketing

  Is it possible to use the self-timer combined with bracketing function?

  Without the timer, it is impossible images take 3 without moving the camera, even using a tripod.

  Thank you

  Corrado,

  No you can't.

  only one item at a time can be selected in the menu of the player, as shown below

  

  several are on the instructions of the disc menu in users of Cybershot Guide:

  Drive Mode menu

• self-timer to aplpha 37 - portrait scene turn to the landscape of the scene

  I use Sony a37 with remote control and automatic timer to make the picures of myself. When I put the portrait of the scene and after setup remote control for self-timer (9pics), turn to the camera automatically from landscape to the scene and the result is that the portrait is blury and sharp background. I would have the opposite effect of the picures.

  It is recommended that set you the switches on the lens and the camera to AF. In this way, the camera automatically focuses on the subject.

  The camera will switch between the different scene modes if you have the mode selector set to smart auto, or the [i] with the Green camera on your dial icon. Make sure you have the mode set knob to SNA and select [Picture] from the options that appear on the screen.

  Another parameter, you can adjust is the setting for area auto focus (AF). You must set the camera mode dial Auto program (P). Refer to the illustration below for instructions.

  

  Taking portraits, you must make sure that the setting of AF area you will use will align with the subject. You can use [area] or [place], depending on the position of the subject.

  If this post answers your question, please mark "accept as Solution.

• Sony A3000 self-timer with HDR

  Is it possible to avoid pressing the trigger manually for the HDR feature?

  Same question for the AEB function, just doesn't seem to work or is at - it something for her?

  Hi Vlad-8! The camera cannot be set on the self-timer mode and is set on the one shot when Auto HDR is turned on. You can choose either [self-timer] or [support: suite] since they are both in Drive Mode.

  If my post answered your question, please mark it as "accept as a Solution.

• Event time missing in iCalendar El captain

  Since the upgrade to El Cap", apparently I have more option of > iCal Preferences > General > Show events time.

  Is there a work around for the time of the event see according to iCal monthly?

  All entries received with gratitude - thanks in advance

  JWA,

  Have you tried to expand the window to display the month?

  

• Control Panel date/time missing HP 7510 in settings

  I can't locate date/time for the HP 7510 settings.  Research on the Web suggest that this is an option under the icon key, then Preferences.   I looked and the date/time option is missiong.  Any ideas?  Thank you!

  Hello

  On HP 7510 located under the option date and time

  Menu (wheel) configuration > tools > Date and time

• Time missing ligatures in FF9

  Using once in a CSS, I discovered that FF9 makes the ligature 'ff', 'fi', 'ffi' in this font, omitting them completely - the word 'office' becomes 'eco' on the screen.

  I put to the top of the test page in the reference below, showing that the behavior.
  The page displays correctly with IE 8, Chrome 16, FF8, Opera 11.60, FF3.6.

  You have made a mistake with the order of the rules.
  
  If you use the property are then you set all the font properties, to ignore you - moz-font-feature-settings the rule of police following him.
  
  To avoid these errors, is always preferable to define all properties explicitly (font size, font family) and do not use generic police version.
  
  It should work if swap you the order.

  font: 0.9em MuseoSlab-500,Arial,Helvetica,sans-serif;
  -moz-font-feature-settings: "liga=0";
  

• I want to do an exhibition of 30 sec on my EOS600 Rebel T3i, using a remote control.

  The manual says to put it under the light bulb.  Last year, I just did an exhibition of 30 sec without the remote control.  I am trying to determine if the remote control supplied with the camera does not work (Zeikos ZE-WRC6, I changed the battery has not also available) or I'm doing something wrong.  The manual says to put the ios in the bulb setting.  That makes no sense to me.  The remote should not work on any setting?

  Should I buy a new remote control or am I not understanding something or something wrong?

  Any help would be appreciated.  Thank you in advance.  [In the 'old days', I just plugged the release cable on my 35mm.]

  I'm shooting Northern Lights, BTW.

  The remote control only works in the position of 10-second self-timer, but this isn't a problem because the answer is instantaneous, not 10 seconds, when you use the remote shutter release.

• Satellite M100: BIOS time is incorrect

  I have a Satellite M100. Yesterday when I turned on my laptop clock sets time in 2010. After that I put the time, missing a few minutes or I went back an hour in 1-2 hours after that I have to reset the time.

  I checked the time window with BIOS using promt, but it's the same thing. I put DST correctly and because I'm using my United network it may be restrictions for me to synchronize the clock. I am using windows XP home.

  Please help suggest what I should do to stop my clock acting wierdly?

  Thank you...

  Hello

  I put t know if this will help, but please don't forget the battery CMOS is not empty. See s operating manuals and you'll find info, how long battery CMOS must be fully charged.

  If you are in permanent line be as safe as the time of the laptop will be permanent synchronize with internet time server. This option, you can find in the properties of Date and time.

  Good bye

• Changed DST time but keeps randomly return return

  ON my and my husband iPhones (a 6s and 6 sec more) time changed correctly for DST but keeps returning random (back).  iOS is updated. We restarted our phones. Anyone else having this problem? I know we can set the time manually, but it would be so much better if it was automatic. Help please!

  Auto date/time is completely controlled by your operator, not the phone.  I have seen your problem posted by users of Sprint.  Contact your operator.

• Real time

  Hello world

  I write here because I have a problem using a controller real-time (OR 3100 RT) in my application.

  The controller is used to send a TCP/IP packet to a Robot SCARA controller that needs to receive an update every 8ms (this is the reason why I used the RT controller) and read the package of the robot. A PC is connected by a cable ethernet on the RT controller, so that the user can select the final position, speed, etc. and view the position of the controller and the values some of load cells.

  If the PC and the RT controller share a few global variables (final-effector position, the value of the normal force,...).

  The application works very well. The problem is that, after a few minutes, the RT controller loses connection with the robot and the robot, I get the error message related to a package delayed; so I guess that the VI had some problem to send the update of position to 8 ms.

  If I run just the VI on the RT controller, without launching the VI on the host PC, everything works fine. When the RT communicates with the PC, I get the error of timing.

  What can I do to fix this? In the RT vi controller I made two loops, a high priority one, to send packets to the robot and a low priority for communication with the PC, but the problem is still there. I also tried to change the settings associated to the timed loop (timeout, take time, missed periods, maintain the phases initial), but no good result (but if I uncheck the 'Discard without rules', the problem occurs less frequently).

  I have attached a few screenshots related to the target.vi, in particular the options related to the synchronization of the two loops, and how I implemented the loop of low priority.

  Another question: are there options in the global variables section that can help me solve the problem?

  Any suggestions would be great,

  Thank you very much to all the world.

  Carmine

  
  

• Problems with timer

  repTimer = new timer (650, pattern.length);

  repTimer.start ();
  repTimer.addEventListener (TimerEvent.TIMER, chooseColor);

  To my knowledge, the above code should run chooseColor all ms 650 as many times as the items in the configuration table.

  private var: delay timer = new Timer (650, 1);

  public void chooseColor(evt:TimerEvent):void
  {
  for (var x: Number = 0; x)<>
  {
  If (model [x] == 0)
  {
  red.setImage (new red1());
  Delay.Start ();
  delay.addEventListener (TimerEvent.TIMER, Redoute);
  }
  If (model [x] == 1)
  {
  blue.setImage (new blue1());
  Delay.Start ();
  delay.addEventListener (TimerEvent.TIMER, blueOut);
  }

  }

  }

  And that the code should go in the table of the model and when the value is 0 or 1, set the image and then run redOut/blueOut all 650 ms.

  Essentially what this should do changes an image every 650 ms according to the values stored in the table model.

  However, it seems to make them all at once, can any1 point out what I'm doing wrong here?

  I don't quite understand what you're trying to do, but here's something that can help:

  You create a single instance of "delayed".  So whenever repTimer fires (and note that you asked so that he can produce a total of events "pattern.length"), you run through the loop times "pattern.length", and for each passage, you ask that the self-timer starts.

  You also add an event listener each time through, although I think adding the same listener for the event even more than once done anything.  However, this means that as soon as you saw the two modes 0 and 1, you will have a timer with two attached headphones.  All triggering events will trigger redOut both blueOut at that time.

  Also, I do not know the behavior of a timer that is already over, but it is possible call. start() on it again will simply trigger the TIMER event once more, immediately.  Or maybe it does nothing.  It seems to be undefined behaviors, based on reading the documentation.  It is certainly not what you want...

  You may want to create a new instance of the timer of delay for each pass through the loop.

• Query is running slowly (30 sec) first, then quickly - how to find out why?

  Hi all

  First of all, a warning: we are a company of rapidly growing software which provides a SaaS-like solution and is hosting an Oracle database for our own software running at client locations. I'm still not a DBA, but I've been learning for a while now and will follow appropriate courses, next year. This problem becomes urgent enough, however.

  We have an Oracle 12 c (12.1.0.1.7) running on a pretty Beefy hardware (card SSD 8 cores, 72GO,) and it works fine. One of our applications raise queries that run slowly very often, but when I run the same query through Toad, it is very fast again. Sometimes I can make the same query to be slow again by changing settings, adding values to an in(), etc., but not always. By not being is not in a position to know WHY the query is slow, I can not as a solution. We have been struggling with this problem for some time (more than a year, I think) and had the same problem when you still run Oracle 11.

  Some more bits of information that might be relevant:

  -This user defines cursor_sharing for force, per my request (the software itself does not lie)

  -J' put optimizer_index_caching at 25, because I know the DB all be in memory.

  -J' put optimizer_index_cost_adj at 50, because I saw full table scan too for my taste. The two parameters when it is while the queries were not already productive.

  -Memory: memory_target = 40 GB, db_cache_size = 5.5 GB, pga_aggregate_target = 8 GB sga_target = 30 GB

  -Optimizer_dynamic_sampling is the default, 2.

  -J' saw a few query plans have a note, something like "Explain plan was made with the statistics from previous executions. All do not have this, however.

  -J' saw some explain plans in which the actual recordings differ a large amount of the expected records, planned somethings was 1, real was 4 billion...

  -We actually had to add / * ordered * / for some queries to speed up execution. It's been a few other issues have better results (20 sec every time! to 200 ms), but worse when Oracle has finally found the execution plan (40ms).

  -Many queries seemed to start with arrays of harm to our taste.

  -A copy of the database, running locally, also had some problems with queries - the plan of the explain command took 2 seconds, the query itself only a few Ms. the same database of course does not receive any insert/update statements.

  It may be important to note that this scheme receives a lot of updates and inserts, so I thought that it could screw up the statistics?

  As I wrote, we have been struggling with this problem for a long, long time. We have made changes to hardware, the parameters of the Oracle, the client software, everywhere, but are no closer to a permanent solution. Any help would be greatly appreciated!

  Kind regards

  Jelmer

  Post edited by: optimizer_cursor_caching 1449188-> optimizer_index_caching

  1449188 wrote:

  Time for a summary:

  -We switched off forced cursor sharing. This reduces overall Oracle CPU usage a bit.

  -We removed the / + SORTED * / in queries with a theatrical performance

  -optimizer_dynamic_sampling was fixed at 11, but _optimizer_use_feedback is always enabled

  -All the tables and indexes were analyzed, I created statistics expanded on the task, address, person

  Many queries work MUCH better, another big thank you to all who have helped me so far.

  ...

  In particular the line 25 confuses me. Always this BITMAP AND even that crazy E-lines / difference A-lines. I'm sure that's the only reason for the poor performance of this query...

  I think you have a mixture of different effects here, which doesn't makes it really simple to understand exactly what is happening. To some extent this seems to be caused by the new features added in 11g and 12 c.

  1. looking at the trace of the files provided above, there seems to be some problem with dynamic sampling overload (DS). This seems to be one of the reasons why you have this "first slow exec", the second fast exec, in this case without a change of regime. In this trace file, it takes 5 seconds or more to run all these queries recursive dynamic sampling as part of the generation of the plan, and there are two DS queries that contribute significantly to that time (more than 3 seconds for these two DS queries).

  In order to have OPTIMIZER_DYNAMIC_SAMPLING 11 value causes these additional queries. The advantage of this setting is that you get good enough (join) estimates. Of course, it is difficult to judge how much you make this setting and how you lose the overhead of generating plan. New DS queries make use of the RESULT_CACHE have, in principle, reassessment of the same DS queries should come from the RESULT_CACHE. However, if your RESULT_CACHE is too small to contain all of the query results (although these result sets is usually very small) you can sometimes get slowdowns in generational terms if these queries need to be run instead of pull results from the cache.

  2. the function of vibration of statistics of course is involved and sometimes leads to a re-optimizing. Once again, this could then lead to the problem mentioned in point 1., if DS requests takes a long time to generate the plan.

  So these two functions together could lead to some difficult to predict behavior (slow first => possibly caused by DS, second time slow => caused by Feedback: statistics, leading again to DS, third etc. quick time.). It may also explain why you see 'first exec' slow, second fast exec, if re-optimizing na not take too much time and lead to a better execution plan.

  3. the special regard that seems to be the wide track as part of an internal source of lines join nested loop - and in this case, the estimates are * iterative *, so be careful when comparing E-lines (iteratively) with A-lines (cumulative across all iterations). The index used functionality combine to combine two indexes TASK_IDX1 and TASK_IDX2 suggest that it would be beneficial to add PERSON_ID to TASK_IDX1 and maybe get rid of TASK_IDX2 - but it might be appropriate to other queries, which I can't really judge. You can then check if adding more attributes to TASK_IDX1 it would make even more selective about the level of the index, as most of the lines for this particular query is filtered on the WORK table, so adding TASK level. FIXED, TASK. CLOSED and/or TASK. PLAN_START / PLAN_END it would make an even more effective operation. But adding PERSON_ID should solve this particular problem.

  4. the 'quick' this query (mentioned somewhere at the beginning) variation has no merge view inline (SELECT HELP... GROUP BY...), then you can try this by adding a NO_MERGE hint to the inline query (SELECT / * + NO_MERGE * / AID...), just to see if that gives you several times the plan 'rapid '. I still think that the index change described might be the best choice.

  5 SQL Directives of the Plan have been mentioned a couple of times, and I think that it is not quite clear to you what they are. They are not "advice", but are a new feature added to 12 c where Oracle persists some information on bad estimates and then evaluates these SQL Plan plan generation for dynamic additional sample queries and the production of statistics to create additional guidance extended statistics. I don't have enough experience with this new feature and therefore cannot judge how they play a role here. You can ask DBA_SQL_PLAN_DIR_OBJECTS and DBA_SQL_PLAN_DIRECTIVES to see if there are tickets for your particular objects in question.

  Randolf

• I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once get to 99% with 1 s t

  I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once getting to 99% with 1 sec each time of seven or eight tests, it had frozen.  I bought this product in good faith.  I had a very expensive (bought only three months ago) PC Windows 7 with water and huge hard drives cooling system with more RAM than anyone I know not.  It is not good enough.  When I read your solutions for my problem, I read on the things written in the words I don't understand.  All I want is Lightroom 5 I won't learn all this from gobble *... I'm nearly seventy eight years... I don't have three days to mess around with your exhaust system to provide me with a product I want to use today.

  Installation errors can have all sorts of causes that should not necessarily be attributed to the material. Have you followed the standard procedures turn off security tools that may interfere? If not find newspapers install could clarify things.

  The problems with the Setup logs. CS5, CS5.5, CS6, CC

  Mylenium

• need help on timer in math quiz game

  Hello, I have problem on my code on the timer.

  The code below is math quiz game, which player have only 1 min to answer all question of random math 30, if 1 min comes out or 30 were the answer, the game will end.

  
  First of all how can I set the current timer number if ill will less 10 sec of time

  Second mine
  If (Question 30 > | myTimer.currentCount > 60)
  {
  gotoAndStop (5);
  }
  does not work

  [AS]
  package
  {
  Add in your import here instructions
  import flash.display. *;
  import flash.events. *;
  import flash.utils.Timer;
  import flash.events.TimerEvent;

  //...

  
  SerializableAttribute public class MathsQuiz extends MovieClip
  {
  Add to your variables of class here
  private var score: Number;
  private var operand1:Number;
  private var operand2:Number;
  private var startNewGame:Boolean;
  private var Oper: int;
  private var Question: int = 1;
  public var delay: uint = 1000;
  public var: repeat: uint = 60;
  var myTimer:Timer = new Timer (delay, repeat);
  
  //...

  public void MathsQuiz()
  {

  }

  private void checkAnswer(evt:KeyboardEvent)
  {
  var userInput:int;
  var correctAns:int;
  

  switch (Oper)
  {
  case 0:
  If (evt.keyCode is 13)
  {
  userInput = Number (txtResult.text);
  correctAns = operand1 + operand2;

  If ((userInput is correctAns))
  {
  score += 10;
  Question += 1;
  startNewGame = true;
  }
  on the other
  {
  score = 5;
  myTimer.currentCount += 10;
  
  }
  txtResult.text = "";
  }
  break;
  case 1:
  If (evt.keyCode is 13)
  {
  userInput = Number (txtResult.text);
  correctAns = operand1 - operand2;

  If ((userInput is correctAns))
  {
  score += 10;
  Question += 1;
  startNewGame = true;
  }
  on the other
  {
  score = 5;
  myTimer.currentCount += 10;
  }
  txtResult.text = "";
  }
  break;
  case 2:
  If (evt.keyCode is 13)
  {
  userInput = Number (txtResult.text);
  correctAns = operand1 * operand2;

  If ((userInput is correctAns))
  {
  score += 10;
  Question += 1;
  startNewGame = true;
  }
  on the other
  {
  score = 5;
  myTimer.currentCount += 10;
  }
  txtResult.text = "";
  }
  break;
  case 3:
  If (evt.keyCode is 13)
  {
  userInput = Number (txtResult.text);
  correctAns = operand1 / operand2;

  If ((userInput is correctAns))
  {
  score += 10;
  Question += 1;
  startNewGame = true;
  }
  on the other
  {
  score = 5;
  myTimer.currentCount += 10;
  }
  txtResult.text = "";
  }
  break;
  }
  }

  public void startGame()
  {
  score = 0;
  Operand1 = 0;
  Operand2 = 0;
  Oper = 0;
  myTimer.addEventListener (TimerEvent.TIMER, update);
  myTimer.start ();
  startNewGame = true;
  Get the game loop to run
  
  addEventListener (Event.ENTER_FRAME, update);
  stage.addEventListener (KeyboardEvent.KEY_DOWN, checkAnswer);
  }

  public void update(evt:Event)
  {
  This is the game loop

  Manage the user input
  advanced feature addon:
  How to manage the entry of undetermined

  Manage the game logic
  Math.Random () =
  real number is between 0.0 1
  or MATH.floor (Math.random () * 13)
  If (Question 30 > | myTimer.currentCount > 60)
  {
  gotoAndStop (5);
  }
  ElseIf (startNewGame)
  {

  Operand1 = int (Math.random () * 13);
  Operand2 = int (Math.random () * 13);
  Oper = Math.floor (Math.random () * 4);
  startNewGame = false;

  }
  
  switch (Oper)
  {
  case 0:
  txtOper.text = ' + ';.
  break;
  case 1:
  txtOper.text = ' - ';.
  break;
  case 2:
  txtOper.text = ' * ';
  break;
  case 3:
  txtOper.text = ' / ';.
  break;
  }

  Manage the display
  txtOperand1.text = String (operand1);
  txtOperand2.text = String (operand2);

  txtScore.text = String (score);

  }
  } //end class
  } //end package
  [/ ACE]

  Use a separate variable to take into account rather than using the currentCount the timer.  Whenever the timer cycles add 1.  Whenever a wrong answer is given add 10.

  For the problem with your conditional that does not work, use the trace() function to see what the value of the Question and County are to see if they reach the values as you would expect they should.