dv3-1075us - problems of downgrading to XP

Similar Questions

• Problems after downgrading my 200SP CQ61 - missing network controller!

  Hello everyone.

  I'm having problems after downgrade my Vista to XP Pro Sp3 I CQ61-200SP followed existing tuturials and they were very helpful, however I am having problems with the "network controller".

  I tried all these:

  Intel Wireless, (Note: MS Windows Installer 3.1or later, must be installed), here

  Atheros Wireless Driver, here or here

  Broadcom Wireless, here

  Realtek RTL8168C Family PCI-E Fast Ethernet NIC, here

  Realtek RTL8102E Family PCI-E Fast Ethernet NIC, here , or here

  But nothing happens! Please help me because I can not install this controller and I am unable to connect to internet!

  Message edited by zide on 15/11/2009 17:33

  Atheros Wireless here

• Problem whit Downgrade Probook 4540 s fron windows 7 pro, win xp pro

  Hi guys!

  I have a laptop HP ProBook 4540 s - B5Q21LT, originally came whit Windows 7 Professional.

  I need to downgrade of W7 Pro on Win Xp Pro, but when I am trying to install it on my laptop Windows XP Pro and start loading the files on the CD, stops to load and I get a blue screen that says Windows has been closed down to prevent damage and the next message.

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  How can I solve this problem? I need work on Win Xp for my work...

  Thanks in advance!

  Enter seup BIOS and change SATA hard drive in IDE mode controller. Maybe it's to "disable SATA Native mode." not sure how he is listed in the BIOS from probook

• Re: Problem with downgrading from Vista to XP on Satellite A200 - 1N1 (ETA

  Dear friends I need help for the downgrade from vista to Xp sp2. My PC is Satellite A200 - 1N1 (PSAE3E)
  Thank you very much
  Francesca Alsherif
  [email protected]

  So, what problem do you have? I mean without knowing what problem you have, nobody can help you? Where is the problem?

• BIOS problem, how downgrade

  I'm updating the bios to 2.14 to 2.21 on my aspire E1 - 571. MY video ram on version 2.14 was 128 MB and is now on 2.21 64 MB. How downgrade bios 2.14 because 64 MB is bad for the game, when I go to install 2.14 has error message "Comparison of bios problem" Please help, help, help

  Erkedo,

  Avoid any problems flashing the BIOS to an older version. Did you do that there is no way to manually change the video memory setting in the BIOS?

• Need help with this problem without downgrading from Vista to XP pro.

  OK so I have a problem, but it is in a common category, it is a rare problem as given that everywhere I look I can't seem to find someone who has the same problem.

  Question #1: Heres Alright so my question downgrade from vista 64 bit of the month last to XP pro SP2... Well, I'm going through the process of installation very well, wipe the hard drive, make new partion (or how ever spell you it) etc. It starts the formatting, and it installs everything seems to be fine. Now when it comes to the reboot screen it counts down it restarts correctly now, this is where the problem occurs. During the restart of the process rather than continue through the installation process which should be, where it says "Press any key to boot from the CD" soon after that instead of going into the installation process it says "disc read error" or something of the sort just underneath. Help, please!

  Question #2 also now that I re installed vista I did all good also, erased the hard disk (even I tried to install XP on) just to make sure they had no data on this. Well now, during startup it asks if I want "a previous version of windows" or "Windows XP" as if I double started somehow. Vista loads still very well when I choose it however. If I managed to do an install own success of XP it should fix right?

  Thanks again.

  Hi Kevin112,

  Thanks for posting. Follow these steps on your XP disk.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  After completing this, then format it and try to reinstall XP again. As for your other question if completely format you your drive using XP you should not see the previous version of XP. The only reason you would see that it's the Vista BCD is located on a second hard drive in your computer. If this is the case and you want to do an install own format two readers please.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Automated problem with downgrade

  Hello

  I have an ASA currently serving Anyconnect 2.4.x. I now want to test version 2.5.x, but whenever I log in, it automatically attempts to downgrade the latest version to the old on the SAA.

  How can I achieve this, without braking the portion of the current 2.4.x version?

  Thank you

  Pato

  Not sure if you have already found a solution to this, but I have just experienced this problem.  I found that if the VPNManifest.dat file is missing in C:\Documents and Settings\All Users\Application Data\Cisco\Cisco AnyConnect VPN Client, the bridge trying to downgrade the client.  Once I copied the file into the directory from another machine, it connects very well and does not downgrade.

• Network of HP Pavilion G6-2244NR, usb, wireless problems after downgrade to Windows 7

  HP Pavilion G6-2244NR network problems.  Okay, so I have a G6-2244NR I had to downgrade to Windows 7 Pro 64 (SP1), due to software compatibility issues.  Install was initially conducted on UEFI, GPT, wiped 8 and started from scratch with Legacy support MBR.  Installation went perfectly well.  However, I start in 7 and I get the network icon showing a red X.  I then go into Manager and note that there is no network listed devices.  Instead, I have 8 devices listed under "Other devices" with yellow exclamations by each of them.  This includes the Bluetooth controller, the network, a PCI device controller, Ethernet controller, SM Bus controller, two USB controllers and an "unknown device".  Bluetooth ID is ven_1814 & dev 3298, Ethernet ID PCI\VEN_10EC & DEV_8136 and so on.  I downloaded the drivers on the wazoo.  I think that I have updated the chipset but know not so straight updates chipset (catalyst 12.6).  Still no luck.  Whenever I have try and install what I think are good drivers I get the error "device works not ' on the LAN card.  Can anyone help?

  A Wi - Fi connection

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-111782-1&mode=4&IDX=1

  Ethernet

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• After Firefox upgraded to version 6, just now, my Add-ons Manager crashes constantly when I try to access it. How to solve this problem or downgrade to version 5?

  During the update process, it said an add-on, java console, was not compatible and would be disabled.

  It is a common problem caused by a bug in the process of updating Firefox 6. Fortunately, you should be able to solve it by clicking one of the tabs on the left side of the Add-ons Manager (Add - ons get, appearance, Plugins...).

• Satellite p300-212 problems after downgrade to xp (yellow? and!)

  Hello

  I had the same problem as the guy FOM this thread---> [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁]
  I lowered my Satellite P300-212 from Vista to XP. I used an installation Win XP CD of Win professional XP including Service Pack 3.
  Then I installed all the drivers from the Toshiba site.
  But I still have a yellow! in the Device Manager to the "Audio device on High Definition Bus". The details of this device show "HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 3B6F18F1 & 0 & 0001"
  So I don't know, what driver I need to take to solve this problem. Rather, modemdriver etc are all installed and work fine!
  In the thread I linked above, the guy only has not copied driver WICH he installed manually. :(

  I hope that someone of you can help!

  Best wishes.

  greatwolfman

  Hello

  You should go to remove device manager and scream this device with the yellow! and?
  Restart the unit.

  In addition you must update Win XP for the last State because there are many patches that are required under Win XP latest series laptop.

• Satellite A305D-S6914 - some problems after downgrade to XP

  Hello everyone. My company has recently bought this laptop for a customer. The computer came with Vista, but the client wanted XP. We have performed a clean installation of XP Pro and then stalked drivers from anywhere on the internet. Unfortunately, Toshiba support not directly from XP on this machine, and therefore, they have no official drivers to download. The machine works, but we have a few problems:

  1. application popup: \SystemRoot\System32\ativvaxx.dll failed to load

  2 details
  Product: Windows Operating System
  ID: 11
  Source: disk
  Version: 5.2.3790.1830

  Message: Drive - the pilot detected a cable or controller error.

  _Explanation_
  This event indicates that I/O failures occurred on the volume.

  _Cause_
  Possible causes include:
  A hardware failure that prevents communication with a disk (for example, a loose cable, a loose disk controller card or a rupture of the cable).

  _User Action_
  Do one or more of the following:
  Check the status of your hardware for any failure (for example, a disk, controller or breaking of the cable card).
  Check Event Viewer for additional events from the lower level storage drivers that may indicate the cause of the failure.
  Restart the computer.
  Contact the Customer Service Microsoft and Support.

  3 lately, svchost.exe has been scathing of the CPU at 100%. We have disabled the automatic updates, but the problem persists.

  Basically what is happening is that the machine crashes under the CPU load and the customer is required to turn it off with the power button.
  This is far from optimal, of course. I'm really at a loss for why this happens.

  Any help is greatly appreciated.

  Hello

  I see the file ativvaxx.dll failed. I think that this file belongs to the ATI graphics driver package.
  Possibly the ATI graphics driver that you have installed on this laptop causes this problem.

  I recommend the other ATI driver search and recommend to reinstall or update!

  Check some ATI drivers for European series on the Toshiba L300, maybe page pilot European you can solve this problem using the other drivers.

  Good luck

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• Problems with downgrade to 8.1 Win to Win 7 64 bit on Satellite S70 - A - 11 H

  Hello

  My daughter already has a laptop Tosh with Win 7 64 bit that is several years old and has seen better days, so for Christmas I he bought a new laptop of S70 - A - 11 am with Win 8.1 pre-installed.
  She hates. In fact she won't use the new laptop at all unless it has Win 7 on it.

  For people who do not use a tablet or phone Windows phone and as desktop printing Windows 8 machine does not work for us.

  Now I am working in a niche THIS role using many OS such as Microsoft Windows (XP, Win7, Server 2003, Server 2008) and Solaris, as well as a bit of RedHat.

  Now, my experience of Win8 is equal to zero.
  I thought it would be simple enough to install a copy at retail of Win7 with SP1 64 bit on this laptop.
  Not so easy as it turns.

  When I boot from the Windows 7 install DVD, the installer crashes as the Windows 7 logo begins to appear on the screen. If I try an installation with the latest driver safe mode which seems to load whenever the lock up is disk.sys.

  So the question is how to install Win 7 64 bit SP1 on this notebook using a copy of Win7 retail?

  Any ideas would be very appreciated.

  > If anyone else is interested the issue is caused by the use of left GPT on version 8.1.

  Thank you very much for us to share this detail.
  This could be very useful and interesting for others here in this community.

  Thanks again for your comments!

• Driver problems after downgrading from 8.1 to win to Win 7 Home Premium

  I have both nine HP Pavilion serialnr PC laptop 15-n255eb:[under the direction of privacy] productnr: G2A26EA OC Windows 8.1 with a startup DVD of Windows 7 (x 32 bit) installed CD for install Windows 7 Home Premium after initial start-up of earn 8.1 first. now Windows 7 Home Premium is running on my laptop but nothing works, I have no drivers for Bluetooth controller, PCI device, SM-buscontroller, Networkcontroller and Ethernet controller, USB and Videocontroller controller. even if there is NO WAY I can go online with you laptop, the driver for DVD - / CD-rom station is missing and insertion of a DVD is not identified.

  What can I do? I don't have a CD to repair and even if I had one that I can't run on my laptop.

  Hello:

  Here are the links to the drivers you need, except the wireless and bluetooth.

  Download them from another PC, burn it to a CD or copy it to a USB key and use it to install the drivers on your new PC.

  First, install the amd chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, install the beta amd catalyst driver and restart.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  Audio: Accept the agreement, download and install the driver for the second on the list. "

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownT...

  Ethernet: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  USB 3.0: Install both.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Card reader:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  3D Driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en...

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1&cc=us&DLC=en&LC=en...

  For the wireless and bluetooth, please this and I'll post the links to drivers, you need for those.

  Click the network controller device. At the top of the network controller window, click the Details tab.

  Now, you see a Description of the list system default list drop-down property.

  Drop down on it and select the second element (Hardware ID).

  Now, you see 3-4 lines of characters, the upper line starting with PCI\VEN.

  After this first line of characters.

• Screen broken, rare model pavilion dv3

  Hello people out there

  I have a problem with my model
  HP Pavilion Dv3-4150so,

  I have seeem to have dropped my phone on the floor, resulting in a broken LCD screen. Now, I don't want to replace the screen LCD broken by a new one, but as I'm pretty new on this I have problems finding the right online screen. In addition, this product of the mine is very rare, and none of the providers screen seem to have in store.

  Now help out me here please, the screen has these characteristics, according to http://support.hp.com/us-en/document/c02514124:

  33.7 cm (13.3 ") high-definition LED HP BrightView diagonal (1366 x 768)

  Would I be able to buy the HP Pavilion Dv3 1075us for my laptop screen? See here http://www.screencountry.com/index.php?section=products&model=PAVILION%20DV3-1075US&brand=HP-Compaq&...

  Hello Jammerjamz,

  Have you tried calling HP to see what it would cost to send it and do replace it? If you are in the USA / Canada, call the 800-474-6836 and follow the prompts. If you are not in North America, please let me know your position and I can provide a phone number for you.

  Please let me know if this solves your problem. Good luck!