DV6775US speaker/Quick Play, the power button

Similar Questions

• Symbol of the three discs stacked to the left of the power button on the front of the CPU

  Pavilion p7_1070t CTO desktop PC

  What is the symbol on the left of the power button on the odf before the CPU?  It looks like three stacked discs and a light under the symbol flashes?

  Hello

  It's just a visual indication of when your drive is reading or writing data - so if it flashes quickly this would indicate a lot of hard drive activity, less when the LED flashes slowly.

  Kind regards

  DP - K

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• Help! My ideapad s110 turns on if I press the power button

  My lenovo ideapad s110 lights when I press the power button. But when I press the Quick Start button on it powers. And it only happens when I have not plugged into the battery adapter. When plugged in the power button works. What could be the problem here?

  Hello

  Please contact the slot support to have the machine checked in the service center

  

  Thank you

  Alaa

• PAVILION 23-P110: how long I hold the power button to get it started?

  HAVING PROBLEMS TO START THE COMPUTER. IF I I PRESS AND HOLD FOR MORE THAN 5 SECONDS, IT DOESN'T SE CHARGE NOT AT STARTUP. IF I PRESSED FOR TWO SECONDS, HE DOESN'T SE CHARGE NOT AT STARTUP. SOMETIMES IT STARTS UP TO THREE SECONDS AND A MILE.

  IT IS A WACKY WAY TO BOOT A COMPUTER.

  Thank you. I'LL WAIT TO ANSWER.

  Good night.

  Happytohelp thanks.

  I continued to play with the Start button. I discovered that if you are an onthousand and then let the power button starts really well. So I'm sticking with this method, and I like it.

  Thank you once again.

• Acer cannot turn on after install Win10 - get 5 flashes on the power button - nothing happens.

  Last week I have installed Win 10 to my Acer laptop 4830 t. rebooted several times and things seem to be ok. I tried playing a CD and got an error message about its incompatibility. Before I could upgrade to the drivers, the system entered hibernation mode and now don't restore or restart at all. I just get 5 flashes on the power button and nothing else. Yes, I've tried holding the power button until 2 minutes. I can't start or get any diagnosis since the system refuses to power on. I tried removing the battery but the battery is integrated and inaccessbile so I can't disconnect it without removing the motherboard to disconnect the connector of the dough. No possibility to boot on USB or CD/DVD car will not be powered. Technical support said they cannot help me if I can't remove the battery (uselessness is which?!).  Apparently they have not suport scripts that relate to the actual products because it is a classic process for much older laptops.  I am an expert IT guy and has more than 20 portable and built a lot of my own computers.  I wonder if anyone has experienced this problem or has any helpful suggestions... Thank you.

  Here is a rather unorthodox method... what worked for him.

  http://community.Acer.com/T5/V-and-VN-series/aspire-V5-wont-power-on-power-light-blinks-five-times/m...

• Windows XP will not be closed. I have to press the power button to turn it off.

  original title: WINDOWS XP WONT SHUT DOWN - I HAVE power to the BOTTOM BY pressing POWER BUTTON COMPUTER

  WINDOWS XP DOES NOT - STOP I HAVE TO POWER COMPUTER DOWN BY PRESSING THE POWER BUTTON

  I had a computer that had posted these symptoms.

  In the end, I did the following:

  1. in Control Panel, "Power Options."

  2. click on the "tab APM" " ".»

  3. check "Enable Advanced Power Management Support"

  4. click on OK

  Check the result.

  Reference: http://support.microsoft.com/kb/313290

  Hope this helps

  Post back if necessary

  ________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion: seeing the power button

  Whenever I turned off my laptop, the power light turn off every time. He died 1 in 10 times. Rest of the time it stays on and if I don't notice that all the battery is consumed.

  I have to press the power button to turn off most of the time after giving the stop option

  Dear customer,

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.

• Press the Power button twice at startup?

  On my new E530 I just realized I have to press the power button twice for the laptop start. At first, I thought that I tap it enough hard or the calendar has been disabled or something, but after many tests I came to the conclusion that it is in fact mandatory that I press the power button TWICE in the order the laptop to start.

  My question is, is this normal / design?

  Google gave was contradictory and inconclusive answers:

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-edge-E420s-start-up-button-issue/t...

  http://forums.Lenovo.com/T5/ThinkPad-edge/power-button/TD-p/307704

  A credible person can sound here?

  Much appreciated and thanks in advance!

  Hey, Gleipnir,.

  When I pressed the button of power quickly as that, in my view, your description it would take two thrusts to get to power be as the first was not strong enough to register. I believe that this does not work as expected and you should not be concerned.

  Best regards

  Hiro

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

  I have a MacBook Pro 2011.

  The power button does not turn the computer on when the computer goes to black screen.

  The battery he is

  iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

  Please help me. I can afford a new Mac.

  Thank you

  Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)