DVD player is more bed - help?

Similar Questions

• My HP Pavilion dv9000 can access is no longer in his DVD player, (e); can anyone help?

  My HP Pavilion dv9000 can access is no longer in his DVD player, (e); can anyone help?

  Hello

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

• DVD player does not? Help!

  DVD player does not? Help!

  See the Article KB

  Have you tried VLC Media Player?

• Satellite A300-1nt - DVD player and WIFI issues

  After my laptop came back from the service, I noticed two things - it autoconnexions ASBIS Servis network, but I have only removed from the list.
  Now my laptop connects to Downnet (my net home) and after some time, windows disconnects and trying to reconnect - without result. (today, I am lucky to write and go that long with him strange - it doesn't cut that fast). Another problem hindering: given that the laptop came to served, I can't use toshiba ConfigFree to connect to wifi networks. It says the adapter is used by approx. another provider I have google-disabled windows zero config, tried everything. Today, I have connected via windows 0 config, otherwise I wouldn't be here...

  DVD player... bed the DVD very well, but Ubuntu brand-new, entered for start menu, when I press on TRY ubuntu, it says that the disk is broken. (I have "BOLD" that the cd was * new *!) -mega for lack of material?

  If you type the answer here - type that requires (dvd/wifi probs) - thank you.

  Did you do fresh install of OS your laptop came after the service?
  I mean using original Toshiba recovery image?

• Satellite L300D - can't watch movies using a Toshiba DVD player

  Hello

  I have a laptop Toshiba Satellite L300D - 12L and the toshiba dvd player has stopped working.

  The laptop is always able to recognize the dvd as the 'AutoPlay' box appears when a DVD is inserted and says ' DVD RW drive (e :)) "at the top of the follow-up to the title of the film.
  I then click on 'play the DVD using a DVD TOSHIBE movie'... and nothing happens.

  I tried several different DVD, which I know work in other laptops or DVD players.
  I tried by following this link...

  http://www.TechSpot.com/VB/topic27616.html

  and deleted the lowerfilters and upperfilters but that cause problems and I had to perform a system restore.
  I'm running out of ideas and I would like to be able to watch DVD on my laptop again because I don't have a TV or a DVD player.

  Any help would be appreciated.

  Thank you.

  Hello

  It seems that the CD-DVD drive can read the disc, but it seems that the Toshiba DVD Player cannot play video files

  Then maybe you should try to play the DVD using other software like Windows Media Player or VLC player download VLC player this small software and install it
  Then try to play the movie

  I recommend also to install the tool called DVD Player Update Check Tool that you find on the European driver Toshiba page.

  With this tool, you can check your laptop, if your DVD player needs an upgrade and if so, it gives you the download link for version upgrade needed.

• Satellite A60-122 CD/DVD Player reads no more CDs

  Hello

  I have a problem with my cd player. It is capable of reading DVDs, but not more than CD?
  How can I change? where is the problem?

  my computer: Satellite A60-122

  Thanks for help.

  J.E.

  Hello!

  Have you tested different s CD? Check it!
  It could be that the drive is defective but try more s CD. Maybe some are rough.

  I had similar problem a year ago. My CD/DVD drive didn't read any DVD's I tried all DVD s I had but without success.
  At the end I have to replace the drive. :(

  Good bye

• My dvd player will read disk now but my cd player won't can anyone help

  Hi, my dvd player will read disc now, but my cd player can not help everyone, also the copy of microsoft sent with the computor is not the same as that installed Wndows xp media center edition 2002 that they sent is as it says on the windows disk mredia Center version 2005 with update

  Update Rollup 2, can anyone advise me what to do?

  Hi Albert,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 questions:

  1. The DVD works fine while the CD player does not work.
  2. You have Windows Media center 2002 edition installed on the computer, however received the disc with Windows Media center edition 2005.

  I would like to know if the understanding is incorrect.

  To solve the first problem, I suggest you visit the link and try the methods in the knowledge base article.

  How to troubleshoot common problems that occur when a Windows XP-based computer

  Cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  For the Windows Media center disc sent bad, you will need to contact the Microsoft customer service. Check the link for more information.

  http://support.Microsoft.com/kb/302822

  Let us know if you have any further questions. We will work together and solve problems.

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My inner smartdrive dvd player won't read DVDs more.  I have updated to Snow Leopard in Yosemite.

  I am currently using OS X Yosemite 10.10.5.  I bought in 2009 iMac with Snow Leopard and have to Lion then updated my current operating system.  The internal dvd player has worked with much fussing, (insert the disc - closing - turn after a wait - by pushing the drive when he jumped on reboot).  If I had the chance after a few hours, the video disc show up on my desk.  When this happened, I was opening the dvd player that was in the Finder and the disc would play. I also tried to open the dvd first player and then insert the disc.  That no longer works.  Yesterday, only it just stop working.  The reader still takes dvd and swirls and click as before but then ejects the dvd. Repeatedly stop and restart is no longer works.  I make sure that the dvd be clean before I use it and have tried many different DVDs without success.  I think it's a software issue.  Does anyone have an idea/instructions a nearly dead grandmother brain that can follow to update or redate back to original factory setting to help this poor Smartdrive not so smart?

  I have no TV, only my computer and phone at low prices.  I need to watch that my library borrowed from the dvd.

  Thank you.

  Try a cleaning CD/DVD

  You can also try to clean by:

  How to clean a Superdrive DVD using a credit card!

  I suspect the optical drive has failed. My 2009 Mac Mini could not shoot with same symptom 4 years ago.

  To confirm a drive failure, insert a Snow Leopard installation DVD and try to start with the C key.

  If this isn't the case, they drive could not be started.

  I would just get an external optical drive, one powered with an AC adapter. The Superdrive Apple USB does not work without a hack.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of Intel iMac or another appropriate forum.

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• HP PAVILION LAPTOP computer: install Windows 10 unrecognized DVD player MSVCP71.dll HP needs to reinstall. HP help me to reinstall?

  Updated for Windows 10 online and now DVD player does not recognize nor activate to play DVDs with HP Media Player. Given message that MSVCP71.dll is missing and must be reinstalled. Can you guide me through this process?

  Hello

  Windows 10 won't come with a good media player, you have to pay for Windows Media Center. He will probably kill on your machine the player from CyberLink software too. Pouvez be able to re - install using CyberLink Media Player:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64647.exe

  or more

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59999.exe

  If this isn't the case, please use the next free drive, he's going to play almost all video formats:

  http://www.videolan.org/VLC/download-Windows.html

  Kind regards.

• USB not formatted; DVD player does not, external readers connect... something wrong, please help!

  Hello
  Desperately need help with my wife's cell phone.
  The dvd player will be noread disc. The drive is there in my computer but cannot read the content. I went to the pc with the problem world, they tried to attach an external hard drive, but it had the same problem, so they told me to restore to factory settings.
  I have a lot of photos I want down the comp before I restore (if that's what I do) but when I attach a USB key or an external hard drive via USB it said that they are not formatted, although they work on another pc.

  I want to save my photos but the difficulty of the laptop. Can someone tell me what I need to do?
  Help most appreciated.

  Thank you

  Stay away from PC World and other 'big box' stores. If you cannot do the following works yourself (and there is no shame in admitting this isn't your cup of tea), take the laptop to a local professional. Get recommendations from family, friends and colleagues.

  1. remove the hard drive and put it in a USB drive enclosure (or use an adapter) and attach it to a working computer. Then, copy your data.

  2. Once your data is safe, put the drive in the laptop and do a factory restore. If all goes well, after that, restore your data from the copy that you made. If everything is not well and/or the factory restore does not work yet, you have the hardware failure. What you do then much will depend on which components have failed and how old is the laptop; that is, it is worth spending anything to fix. MS - MVP - Elephant Boy computers - don't panic!

• Need help with the installation of the DVD player

  DVD player not working not... new DVD drive installed... does not.  P - 7 needs to be plugged inside the computer?  Active Device Manager, shows the two drives I have installed.  Says windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. Code 39... checked for new drivers... said drivers are up-to-date.

  Hello

  · What is the number and the model of the computer?

  Run the troubleshooter from the link below and check if this can help: your CD or DVD cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  See also: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

• Try to burn images on a cd to make them playable on home dvd player. the computer will burn on the cd and the images will not play on a DVD player? any help would be great.

  Try to burn JPEGs on a cd in "master" mode to make them playable on standard dvd players. the computer will burn on the cd and the images can be viewed on another computer, but cannot be viewed on a DVD player? any help would be great.

  Hello Lackyboi,

  ·         How you try to burn the pictures on your CD?

  ·         What is the burning software CD that you use to burn the discs?

  I suggest you burn your photos using Windows Media Player.  You can read this article which will give you information on burning media with Media Player:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  1. in Windows Media Player, on the Tools menu, click Options.

  2. in the Options dialog box, on the devices tab, click the name of the reader of CD - R or CD - RW you use and then click on the properties button.

  3. in the Properties dialog box, under the recording tab, select a slower write speed.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD player all of a sudden are more recognized

  DVD player worked fine, but suddenly, the system does not recognize the drive when I insert a disc that has data on it, but recognizes when I insert a blank disc. Any suggestions to fix this?

  Some options here: http://support.microsoft.com/kb/314060

  There are various reasons why a CD or DVD drive is not detected. The resolutions that are listed in this article can help in some cases but not all instances of this problem.