DVD player not working not properly

Similar Questions

• DVD player not working not not since upgrading to Windows 10?

  Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
  My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

  I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• DVD player not working not not on Satellite Pro U400-142

  My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

  "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

  I would be very grateful if someone could give me some ideas on how to sove this problem.

  Thank you

  P

  What you can do is follow:
  Remove the optical drive from Device Manager drive, restart your laptop.
  The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• DVD player not working not not on Sat 1800-614

  Hello

  I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but the two images and audios are dispersed and disrupted last year. It only works with the old DVD (2001-2002) and DVX and so on...

  I was told that it is because they changed the format of DVD or something like that. Can you help me to fix it? Is it possible to update the BIOS any help? Maybe the firmware? You know the one that I need and where I can find it? I tried to update the drivers for DVD but it seems that he does not accept the change. Do you know how to update the drivers too?

  THANKS TO ANYONE WHO CAN HELP! I HAD THIS DVD PLAYER AND I NEVER GOT TO USE IT!

  Hello

  I put t know if you tried, but you can try to install some beyond news who is responsible for playing movies on dvd (files)

• Burning DVDs in DVD player not working not

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  ============================================
  Burn a video DVD that will play in a free-standing DVD player you
  need software for DVD creation... the only version of Windows XP that
  included this option was the "Windows XP Media Center Edition 2005.

  See the following article:

  Movie Maker 2 and DVD burning software-
  Media Center 2005 Edition
  http://www.Papajohn.org/mm2-DVD-MCE.html

  Perhaps the following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• DVD reads not properly: Medieval 2 will start no more (original disc)

  Hi everyone, sorry if I write this in the wrong part of the site, but I really need help with something. I bought a new pc game (Medieval 2 Total War) and when I 1st installed, everything worked fine. The next day I went to play again and when I clicked on the icon of the DVD player has started and the disc was being read. The problem was an error message saying that I need to insert the right disk when it is clearly stated on the manual 1 CD has been kept in the drive. Can someone tell me why he was working one minute then the next saying that my drive does not exist please? I tried to reinstall and everything, but the same message appears again and again. Any suggestions please?

  Thanks in advance
  David

  Hello David

  It will be interesting to know what model of laptop you have.

  By the way: try to disable the DLA to packet writing software. Maybe it helps.
  Modification of a DLA installation procedure is as follows:
  1. open Windows Explorer
  2. right click on the CD/DVD drive icon and choose Properties
  3 click the DLA tab
  4. to disable DLA option erase DLA activate on your box of readers

  Please let me know if it works.

• DVD player not recognized by the computer

  Have x 2 divided windows 8.1.  Have loaded the software for LG Super Multi blade DVD player.  No AutoPlay.  Work on another computer.

  Hello Arnoldj,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your optical drive not auto playback you discs in point 8.1 of Windows. Although it is not a Windows 8.1, but a document of Windows 8 steps will be the same, and I think is where we should start. Please visit the HP support document: HP PCs - impossible drive reading discs (Windows 8), to focus on the problem you are experiencing.

  If you still need additional help feel free to re-post. Thanks for posting on the HP Forums. Have a great day!

• I need a update for my HP DVD player & not rely on Microsoft

  I have a problem with HP DVD & I tend to disagree if is saying that my DVD drive (HP DVD RW AD - 7586H) must be replaced. My dvd player works when he wants (has a clean spirit). The last update for my DVD drive is 21/06/2006 (7 years and enjoyed passing updated driver). Ive uninstalled my DVD drive & reinstalled after startup & has nothing there is never, ever a update for my via DriverBooster, DriverScanner or my in-kind Assistant from HP DVD drive & I used a certain programs to update my driver (Driverbooster, DriverScanner etc.). NEVER. If HP can give me a BIOS update, why not send me a DVD Player update through me HP Support Assistant HP?  Well, I think this is a time of combat that HP should create an update to solve all the problems of DVD rather than depend on Microsoft to fix it. If my DVD drive was well Windows I would use the microsoft Fixits, but since it is a HP DVD drive, I think HP should solve the problem, not Microsoft.

  What you see in the Device Manager is the driver control for the dvd player, what are you really need to look at is the version of the firmware on your dvd player & see if a newer firmware is available.

  Usually many even intermittent faults are more material than firmware, readers are very cheap but & can access a job of 2 minutes to replace if necessary more you a better quality disc & spec as you wish.

  I think KH21 is new firmware for this dvd player.

• Windows Media its DVD Player-not

  My audio Windows Media DVD player does not work.  The audio and the FM plays well.  Can help you with a solution of his DVD.

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

  Good luck...

• Vista Media Center DVD Player not to return to previous position

  Hello and thanks.

  I have Vista Ultimate and I dive into the wonder that is Vista Media Center. It has a great feature! However, one of the points I noticed that lack is the DVD player does not playback from the previous position. As far as I know, there is no option in the GUI. In a spirit of clarity, let me give body to what I mean:

  If I play a DVD movie and stop it in half way through and close Vista Media Center, then restarts VMC and DVD playback, the DVD starts from the beginning and not the position that I stopped. It is not only boring, it is a feature of all the other DVD players I have used offers.

  So, my question is this: How can I activate previous position reading recovery in VMC?

  Hi AShimon,

  Thank you for visiting Windows Vista Microsoft answers forum.

  There is no option in Windows Vista Media Center to resume playback where you left off, after the closure of the Media Center.

  However, I will propose you to pause the video you play and then lock the computer if you do not use or else you can also continue to work on the computer after pausing the video. Whenever you want to watch the video from where you paused just click on the 'play' button.

  Please let us know if it helps.

  Thank you and best regards,
  David

• DVD player not recognized; error code 10

  Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

  Thank you!

  Werner Horlbeck

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)