DVD Player reads dved but doesnot read cd

Similar Questions

• my dvd player reads all movies what do I do to get it working.

  my dvd player reads all movies what do I do to get it working.

  I had this happen to my DVD player recently.  The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player.  Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player.  After that I connected it, you download an update of the firmware and I could see the movie.

  My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.

• Satellite A60-122 CD/DVD Player reads no more CDs

  Hello

  I have a problem with my cd player. It is capable of reading DVDs, but not more than CD?
  How can I change? where is the problem?

  my computer: Satellite A60-122

  Thanks for help.

  J.E.

  Hello!

  Have you tested different s CD? Check it!
  It could be that the drive is defective but try more s CD. Maybe some are rough.

  I had similar problem a year ago. My CD/DVD drive didn't read any DVD's I tried all DVD s I had but without success.
  At the end I have to replace the drive. :(

  Good bye

• DVD Player reads discs since the installation of explore 9 on vista operating system

  My laptop dvd player will not play discs from installation to explore 9 on the vista operating system.  The light showing a disc in the drive, the disc drive is in the Control Panel, but the disc cannot be read. He asks me to insert a readable disc.   I've restored my system, still does not.

  Someone knows how to fix this?

  Hello

  Give this link a glance and follow the steps listed by SpiritX MS MVP. http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-cddvd-drive-doesn

  I hope this helps!

• DVD Player reads only CDs.

  Windows installs a CD-ROM driver for my DVD RW drive and won't let me install a DVD driver.  As a result, my DVD player not reading DVD where can I get a DVD for Vista x 64 driver?

  Hello

  I suggest that you follow all the steps in the following articles in order to solve the problem.

  Note: Click "fixit" everywhere where there is place for automated troubleshooting.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

• Qosmio F60 - BD DVD Player read DVD only if the theme is one of the aero themes

  I found that DVD Toshiba BD player will play only DVD if the windows theme is one of the aero themes.

  Personally I do not use aero.

  Does anyone know how to get around this problem?

  I can play the DVD using other software.
  The main attraction of using the Toshiba Software is it is the function of upconversion.

  Thank you.

  Hello hicham.

  This means that you use the DVD from Toshiba drive, but you can t without Aero theme Blu - ray game discs?

  In this case, I would recommend the DVD Player update. Just check for an update from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com

  Have you tested other players? Toshiba DVD player in my opinion is not important. I use VLC media player because he can play audio and video files more! :)

• DVD says DVD player is blank, but it is not

  Hi all

  I am trying to install a program on a DVD. To do this, I need to launch the DVD at the start. It is has not been recognized during startup (i.e. it has not been said "Press any key to boot from the disc." or whatever it says) so I started the computer normally and inserted and it recognizes it as a blank DVD when I know for a fact the installation iso file is there. It works completely fine on other computers I've tried and other DVD works perfectly well, but that there is no reason any. I did a little research on the matter and have not found much to help my problem. I uninstalled Alcohol 120% (which is a virtual drive software) as it was suggested on a Web site I found but that has not worked. Manage devices said it works fine as well and it does not work in SafeMode either. I have no idea what it is and I can't find much help on the internet so any suggestions are appreciated. If you need more details let me know and I will respond immediately.

  Thank you!

  EDIT: I tried to uninstall the device and re - install, delete the registry UpperFilter in the Windows registry and tried to use the Windows Fix It program. All had no chance. :(

  Hi all

  I am trying to install a program on a DVD. To do this, I need to launch the DVD at the start. It is has not been recognized during startup (i.e. it has not been said "Press any key to boot from the disc." or whatever it says) so I started the computer normally and inserted and it recognizes it as a blank DVD when I know for a fact the installation iso file is there. It works completely fine on other computers I've tried and other DVD works perfectly well, but that there is no reason any. I did a little research on the matter and have not found much to help my problem. I uninstalled Alcohol 120% (which is a virtual drive software) as it was suggested on a Web site I found but that has not worked. Manage devices said it works fine as well and it does not work in SafeMode either. I have no idea what it is and I can't find much help on the internet so any suggestions are appreciated. If you need more details let me know and I will respond immediately.

  Thank you!

  EDIT: I tried to uninstall the device and re - install, delete the registry UpperFilter in the Windows registry and tried to use the Windows Fix It program. All had no chance. :(

  I solved the problem by replacing the DVD drive with another. I think she came of his time.

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.

• My DVD Player reads but does not write/copy (Satellite A60)

  I need help, I use a laptop Satellite A60 - 106 series
  and my dvd burner stop a write only copies 3% and stops. I use nero and roxio.
  Please help me.
  You can reply to [email protected]

  Hello

  Sorry, but I don't understand what you mean with adaptation? If you want to burn files to DVD media, it stops after about 3%. Am I wrong?

  Try to remove the drive from Device Manager, and then restart the device. After that the drive will be recognized and installed correctly. You can also try reinstalling the burning software.

• DVD Player reads no CD and DVD

  I have a laptop Dell Inspiron with Vista 64 bit, which is a year old and a few days ago that the DVD drive stopped reading discs. When I insert a disc and try to open it I get a pop up window that says "insert a disc. Please insert a disc into drive f"and then there's a link to"help me choose a disc ". That is the way I use to access the computer disk (Windows Media player, iTunes), I get the same window.

  In the order I did the following: I restarted the computer. I tried to read several different CDs/DVDs that I know have worked before. I ran the anti-virus software, which has identified a virus, quarantined it and I removed it. I assured my drivers are up to date and I uninstalled equipment and reinstalled. I tried restoring the system several times, but after restarting the system restore, I get a message that says: he was not able to restore the system.

  Any help on this would be appreciated. Thank you.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• My dvd player reads a pre-recorded disc with vista. __

  It is an Optiarc dvd rw AD-7560 s on a sony

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  If the DVD or the DVD? If all the drive might have a problem.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  If the burn is a burning question at slower speeds, or by using the master could help. A
  CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP dv6 DVD player read DVD not

  Hi, my HP dv6 is running windows 7 and for some reason, it won't read DVD. It will read CDs fine anything on them. I tried to uninstall and reinstall the driver and find other sollutions and so far nothing has worked. Help, please.

  The model number is a dv6-6170us and I tried to find updated firmware to update but it seems that I have later. I have an external CD/DVD drive that I bought some time ago. I tried cleaning the lens several times but no progress. I think I'll just leave it be and use my outside for now. If I decide in the future so I'll buy me a replacement. Thank you for your help.

• ONCE 1 DISC CD/DVD PLAYER READS ALL THE OTHERS LIKE WHITE

  has got an acer 5315 laptop filth single bed 1 disk. reads all the other virgins or be reformatted, I'm puzzled... any advice would be greatly appreciated.                am running vista Home Basic edition if it helps

  Hi Ronwaddilove,

  1. are you able to play these discs on another computer. ?

  You can read the following article and try to run the Fixit and see if it helps.

  Your CD or DVD drive cannot read or write media

  Hope this information is useful.

• Disc and DVD player read not only draw message get open no disc in the drive, again with the same results.

  Sought to follwed and previous forum information steps to unload the upper and lower registry filters but none are included.

  Have you tried devcon in back and get the followin message "devcon is not recognized as a builtin or external operable program or batch file."
  'Fix It' have tried without success
  Bought new dvd but still get the same results.

  Hello lyneham5155,

  Thank you for using the Microsoft answers Forum

  When this disk is listed in your device manager and you view the properties give any particular error as code 39 or code 10 code? Article below may help determine what the issue might be or helping to solve completely. Sometimes, the stack of filters in the registry is corrupted by software that is using the drive for some actions, such as write applications or multimedia CD or DVD. Take a look at the article below and see if it helps you solve your problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Equium - Toshiba DVD Player can't read DVD

  When I insert a DVD into my internal DVD Toshiba Island DVD player application starts but then displays this error message: -.

  + * Unable to output the video to an external device. Please change your device display by pressing Fn + F5 keys after the end of the application * +.

  I press Fn + F5 keys according to the directives and the drop-down list display Fn shows the symbol of the laptop before retreating off the screen. But still the DVD returns the same message and will not play. I find myself with Windows Media Player to play the DVD.

  What is going on?? What I am doing wrong?

  I'm new to the forum please excuse if this is a repeated question.  :-(

  What satellite notebook do you have?
  What operating system do you use?

  Try to update the DVD player that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Use an external monitor?