DVD plays jerky.

Similar Questions

• TE2000: DVD play upside down and mirrored with Cineplayer 2.1.3

  Have installed Cineplayer 2.1.3 Roxio but DVD play upside down and in reverse!

  Software reports card video overlays graphics either not taken in charge by bcard or unavailable.
  Is this fixable or do you spend for my money back?

  Hello

  In my opinion, this question is for software producers. You have this problem simply by using Cineplayer?

• Re: Satellite U400 - buttons mute/DVD/play/stop etc do not work

  Just checked that I have the same problem - it's none of my touch buttons work (mute/DVD/play/stop, etc.) and they stay on up - even when I turn off my laptop completely.

  As far as I know that I did nothing else except some windows update, that could have done it? I quite often use these buttons, so the question is rather awkward for me.

  If it is a different matter, I'll start a new thread. See you soon

  Hello

  Eventually MS updates confused something in your system.
  The buttons are controlled by the different applications that are part of the VAP.

  I think that you should remove the PPV of the system and should reinstall it again.

• I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.  Can someone please?

  I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.

  Everything seems to be fine as Photos, music and home movies etc, which all are thinner, it's just the DVD playing in the slot of the iMac.

  Can someone please?

  DVDs have been blocked since mirroring due to copyright

• HP DVD Play - Vista Media Center: blue border

  Hi, I have a HP Slimline s3330f media center (VMC) vista, running HP DVD Play (v2.42 build 5820).  He plays the Blu - ray.  I connected it to the TV via HDMI and I have audio digital (S/PDIF) goes directly from s3330f to my digital receiver.

  Discs Blu - ray play well as VMC when I select the item 'HP DVD Play' to the Ribbon of VMC.  The problem is that there is a blue border around the movie.  It's as if the movie does not play in full screen (it has a blue border of 2 ").  Now, I know that this blue border is the VMC screen in the background.  Also, as a test, I stopped VMC and launched HP DVD Play directly to play a blu - ray movie - it works perfectly.

  No idea how to get rid of the blue border (in other words, do read HP use DVD full screen when VMC is running)?

  Notes:

  Installation VMC - to use a big TV flat screen

  -VMC is configured as 1080i

  -nvidia drivers are installed at 1920 x 1080 resolution

  nvidia drivers - are configured to use HDTV 1080i (and I also tried 1080 p, 1080 p/24, same result).

  OK, I seem to have solved the problem.  However, I made a few changes and I don't know exactly what the change really solved the problem.  Here's what I did:

  -upgrade to the latest Nvidia drivers

  -deleted the Realtek audio drivers and reverted back to the default value of Microsoft HD Audio drivers (this, BTW, although DD 5.1 to work via S/PDIF)

  -implementation of the registry changes (see here: http://thegreenbutton.com/forums/thread/278165.aspx )

  -re-installed HP DVD Play (latest version)

  I suspect it's the registry changes that solved the problem.

• stop DVDs, play backwards

  How to stop DVD play backwards on XP home

  The video recorded using a panasonic dmz-... camera avchd mode?

• DVD plays video, but there is no sound?

  DVD plays video, but there is no sound? XP

  Maybe install an AC3 Filter would be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3Filter downloads
  http://AC3Filter.NET/wiki/Download_AC3Filter
  (tests - AC3Filter 1.63 full b)

• DVD plays don't properly since Windows 7 install.

  Installed Windows 7 (full installation, no upgrade).  Will not pick up a DVD playing for most of the time.  When the DVD is picked up and play, it is very choppy.  ATi Radeon 2400 HD - updated drivers.

  DVD worked fine on Vista.

  Hello Nessiet,

  Thank you for your message.  This phenomenon occurs with every DVD or just one?  You can display data on other drives, such as CD?  If so, there is the possibility that the DVD as Your ' e that you are trying to view is scratched or damaged.  Please let us know so that we can better help you get this issue resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 - Video DVD plays but the images are not displayed

  I have a DVD that we created with Adobe Encore.  It has a mixture of video and still images to a timeline.  I play this back on a new computer Windows 7 with Windows Media Player 12.  The DVD plays back fine until it reaches the fixed image on the timeline.  At that time the reading shows just the last frame of the video to the video portion.  The audio continues, but it does not show the image.  We tried multiple image formats, and nothing seems to work (.jpg, .tiff, .psd).  The video is very good reading but with CyberLink DVD player and on a standard TV/DVD player.

  Any thoughts?
  Guy

  Hi Guywestermeyer,

  Check to see if the following is useful.

  Method 1:

  Run the troubleshooter in Windows Media Player Settings and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  
  Method 2: You can try to download the required Codecs. Refer to this article for more information on Codecs.
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  See also:
  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  Hope this information helps.

• Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

  MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

  DVD Player Version 5500.66 / Build 5,560 (2)

  When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

  Your help is appreciated...

  Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

• DVD plays but Audio CD is ejected

  Recently, I helped a friend update an early 2008 iMac (20-inch) to raise the RAM to 4 GB and install OS X 10.11.5 El Capitan (it was under Snow Leopard). One of the questions he had before the upgrade (which he spoke to me after the fact) was that the audio CD had stopped working. He could not read them or pull them up in iTunes. Then, when I was there to guide him to the new operating system, it grew and we tried it. Of course, any form of CD audio would be read by the optical drive (we tried a computer-burned audio CD and another CD sales of the Etta James jazz diva - both were spun and then ejected unceremoniously). I thought that the optical drive was a failure.

  But this is where it gets weird. We tried a DVD trading and down-and-this is, he spun, launched a DVD player and started playing the movie.

  Any thoughts on why a video DVD would work fine, but audio CD is not in the same optical drive?

  Thank you

  Barry

  CD and DVD uses different lasers in an optical drive. You can have a failure and other work.

  You can try a disk cleanup drive. If you're lucky, it may just be lint blocking the CD laser.  If this isn't the case, you will need to replace the drive or download an external drive.

• Satellite L455 - Burned DVD plays in slow motion in the dvd player

  Hello

  I have a Satellite L455.

  I got burned a DVD with Nero 7 premium, but when I play in the dvd player, it works idle all the time. Other movies are played normally (so the problem is not the dvd player phillips), this only happens with the ones I burned in my new Toshiba laptop.

  I have tried to burn all kinds of speed (x 8, 6 and 3), but the problem has not been resolved.

  Can someone tell what should I do?

  Thank you.

  Hello

  You tested this external DVD drive?
  I recommend to check the options of Nero again and maybe, you should also use an other DVDs from different manufacturers.

  My DVD player didn t play DVD's serious too, I changed the manufacturer of DVDs and then the DVD that can be read by a DVD player

• Satellite P200-1EE does not properly of the HD-DVD play

  Hello

  My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
  So, I tried the setting on my DVD player program but made no difference at all

  I think HD-DVD player is broken.
  Can someone help?

  Hello

  I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
  Am I wrong?

  So first of all, you should try to update your HD Toshiba DVD player software.
  Then, check if the HD-DVD player firmware update is possible.

  The two parties, you should find on the European driver Toshiba page!

  I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

  Good luck & best regards

• HP TouchSmart DVD plays not new Blu - Ray

  Computer: HP Pavilion e9250t

  OS: Win 7 Home Premium 64-bit

  I'm playing a Blu - ray (Dexter season 6) most recent title thanks to the program "HP TouchSmart DVD", and it does not work. He asks me if I want to check for an update of the software when I try to read the disc. In the past when this has happened, the update allowed me to read the disc, but I seem to already have the latest version of the software (4.1.5122). He can't find the updates, and I found no updates through manual searches on the internet.

  I can still play other Blu - ray discs. Scott Pilgrim just jumped in, and it worked fine.

  Y at - it a newer version of the software out there? Or do I have to wait longer for an update? I guess the other possibility is that the drive is faulty, but based on my story with this question, I would say that the obsolete software is a more likely cause.

  Does anyone have information on this? Anyone with similar problems? Thank you.

  Hello

  Please try this (it can play BD too):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-95477-1

  I hope this helps.

• HP mediasmart dvd - play the blu - ray disc Avengers

  Hello

  I have a hp laptop with win 7 Home premium 64-bit.

  I use the HP Mediasmart DvD version 4.2.2.5122 of the software and I can not play the Avengers Blu - ray disc - all other bd drives works fine (tintin, avatar, etc.). Does anyone know if there will be an update for Mediasmart dvd software support disk Avengers?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K