DVD - ROM HL-DT-ST DVDRAM GU61N on Acer laptop

Similar Questions

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 2400-103 - how do I replace the DVD-ROM?

  Hello

  I am trying to replace my s2400-103 satellite dvd - rom drive, but I can't get the laptop computer. I have tryied to remove all the screws at the bottom of the laptop, but the disc has yet been set. How can I get the old dvd - rom on my computer?

  Hello

  Are you sure that you have removed all the necessary screws which were placed at the bottom of the unit?
  In my view, the reader is fixed with an additional screw that is placed on the inside but I m not 100% sure.
  You can also ask the service partner how to replace the drive because it has detailed documents and information on these procedures.

  Good bye

• No CD/DVD ROM detected in my HP Pavillion laptop drive.

  My cd/dvd rom drive is missing from my HP Pavilion laptop, I got tired to remove the drivers from registry with the upper and lower filters, but it still does not work. The drive gets power and it opens and closes as it looks like its reading for a quick second and then it stops. I can open the player who says he gets power, but I can't understand whats going on. If anyone can help it would be greatly appreciated. Thank you

  Al

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. If the drive does not appear, continue below.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• The CD-ROM/DVD-ROM driver cannot be loaded by Windows and can be corrupted (Code 39).

  My DVD/CD driver drive HL-DT-ST DVDRAM GSA-T20N ATA Device cannot be loaded by Windows and can be corrupted (Code 39). How can I get the original device installed new driver if the CD/DVD drive does not work? It is available for download? Should it be first uninstalled and re - installed? A relative novice can handle?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Update the driver for the CD/DVD drive and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Run the fixit for the following Microsoft Fixit and if it helps.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 3:

  Uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  Hope the information is useful.

• CD/DVD Rom will play audio CD but not DVD

  Hello

  I am at a loss :( The CD/DVD-rom (ID: HL-DT-ST DVDRAM GSA-T50L) in my refuses to Asus computer (Vista 64 Home Premium) laptop to play DVDs now but will read audio CDs, I put in the drive without problem. When I put a DVD in the drive, it will make clicking sounds and then turn and then turn down and then do nothing at all. I have scoured the internet looking for a solution to this problem and have done everything I could find a solution (drivers are up to date, checked registry and was fine, checked reading auto and put all ask me every time, ran auto fix - it and he just says cannot read the media type, uninstalled and reinstalled the drive) etc.).

  The drive is displayed in Explorer, but when I double click top with a DVD, nothing happens. I even downloaded the new codecs and I still have this problem. The problem started shortly after I have updated to SP2, and I've even uninstalled SP2 and nothing. I tried system restore and still no dice. I do not say that this problem has nothing to do with the installation of SP2 or anything, but the drive has worked perfectly well before that date. I initially thought that maybe the drive went wrong and think always that after trying all the solutions that I found, but a bad combo player would still be able to play audio CDs without problem?

  Any help on this would be much appreciated...

  Thank you

  Hello

  Update the BIOS can not help if the drive had worked for a good period of time however it
  is definitely worth it.

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  You did a large part of this however please start at the top and work downwards as it is often the total process
  to solve the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  ----------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer and a device for possible firmware updates and good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• Satellite 1800-400: need DVD - Rom

  I'm looking for a dvd - rom for a Satellite 1800-400. Where can I get one?

  Hello

  If you check the manuals for Satellite 1800, you will see that this camera comes with different drives. One of them is SD-R2002. Google all over the place. You will find a lot of online shops where you can order one. Another solution is the Toshiba service partner.

  By the way: check the ebay also.

  Good bye

• CD / dvd rom compatibility to Pro 4600

  Hi, anyone know what cd/dvd rom combo drive is compatible with the satellite Pro 4600? I know that a combo drive is installed as standard in a variant of my machine. When I think about buying is the Toshiba SD-R2102 or SD-R2412.

  Hello

  My opinion is you should contact Toshiba authorized Service partner. Here, you can get the best information about new hardware parts and witch one is sufficient for your type of laptop.

• Re: Which CD-ROM/DVD-ROM drive will fit in my Toshiba protégé M700 Tablet

  My Toshiba protégé M700 Tablet came without a CD/DVD-Rom drive. What brand/model will fit in this machine and where is the best (and cheapest) place to the source of this element.

  Best regards

  Don

  Hello

  I found some info that Portege M700 comes with drive of DVD Super-Multi Panasonic UJ-852STJ-Z.
  I wonder your one comes without optical drive.
  Another device is placed instead of ODD?

• Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

  1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
  But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

  2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

  3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

  Thank you. I hope that my post is OK like this instead of three different positions.

  1 take a look at the other Tecra 8100 models to determine which processors are compatible.

  2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

  3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

  Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

• Slim SelectBay DVD - ROM drive

  I recently bought a second hand Satellite Pro, but it seems to be without a DVD player and has only a weight saving plastic 'trick' in the Slim Selectbay.
  I know that my laptop is now discontinued, but it is anyway to acquire a Slim SelectBay DVD - ROM drive, because they are not for sale in the "Accessories" section.

  Hi Mikey

  In my opinion, you should contact partner in your country. They can order each hardware component or any part of the accessories for each model of laptop computer independent of how old the model has.

• Toshiba DVD - ROM SD-R6112

  Hello

  I have a Toshiba Satellite SA60-352, and I have a little problem with my Toshiba DVD - ROM SD-R6112.

  Sometimes when I insert a cd or a DVD-Rom dvd starts to spin but dusn, t find the cd or the dvd.

  Then I open the DVD-rom and close it, then the DVD-rom works very well.

  I have a Toshiba DVD - ROM SD-R6112 with firmware 1515

  It is not a big problem, but if it can be solved, that would be great!

  I use windows XP PRO I also tried a system restore but I stil have the same problem with the DVD - ROM Toshiba SD - R6112

  Greetings
  Robert Huijser

  Hello

  In my opinion, the only thing you can try is to clean the lens. This has happened with any DVD or CD?

• DVD + RW disc in the DVD - Rom drive

  I have a Toshiba SD-M1222 DVD - ROM drive. I recently bought a new machine DVD + RW internal separate.
  Discs recorded on DVD + RW not reading no problem in my other internal DVD players, but when I try to play them on my DVD-Rom on the PC, I get a message "disc not recognized", even though I have set up the record to be compatible with other players.
  Is there a way I can get the DVD + RW discs to play on this DVD - Rom drive?

  Hello

  Sorry but there is no way to change this. These are two different formats. I have the same situation with my Satellite.

  If you want to have more information about DVD formats google everywhere.

  Good bye