DX70 record on ARM.

Similar Questions

• Signature Simulator

  Hi, I'm totally new to BB dev. I'll make an application in the kit of native development. I was hoping to use .net, but I don't know where to start here. I'm new to C++, but having 18 years of web development, VB, VBA VB.net, Java and Java. I pick up new languages easy. So I have the Simulator running on my MacBook Pro. I have the native SDK on a virtual machine in windows 8 (because I was going to use .net). So my SDK can see the SIM (by the virtual machine) and I get to the symbolic part. Now, he says "the debugging token creation error". If I try to import a he wants a .bar file but that BB gave me is a .csk file. Renaming does not work. Any help would be great. If you have visual studio info that would be better. I installed the libraries of VS, but beyond that, I'm lost. Have not used VS in a few years because I've been in Java. Thank you

  In the momentix

  1 - the window-> Preferences-> Blackberry-> signature-> back to the top (put the 2 files and it will generate the zip file).

  2 - window-> Preferences-> Blackberry-> signature-> restore (this is the file generated in step 1).

  3 - file-> export-> Blackberry-> Release Build-> next-> finish (put the password of the key, it will generate the file .bar, it comes to the record of arm-> o.le - v7)

• Using ipDTL with CC2014 of hearing

  Anyone out there using ipDTL for the people of the VO?

  If so, can I use hearing CC 2014 to record a VO entering to a track of hearing directly? If not, are there any materials or app that I can use to track the laity a VO at the hearing with the help of ipDTL?

  More info on ipDTL ipDTL - substitute ISDN for remote streaming contributions

  Thank you.

  SUCCESS

  This is where you want to be simple simple solution VB-Audio virtual Cable

  Soundflower Windows alternative: VB-Audio virtual cable - Blinkinlabs Forum

  Download and follow the simple instructions... it works. But don't forget to select "listen to this device" on the side of the output of cable in the installation program. Also, make sure that you set input and output for the same sampling rates too. I use 48K 24 Bit

  Start the hearing.

  Audio equipment / preferences

  Select output cable entry by default and all that comes at the end of PC will get in the entrance to the hearing.

  Make sure that the sample rate is equal to the sampling frequency selected in VB virtual Audio Cable

  Once connected you can uncheck 'Listen to this device' on the cable outlet and use select monitor input of the hearing on mixer or a Publisher. It is the right of the recording of "arm I select symbol (orange)." With the assistance of monitor, you will be able to hear the arrival of the signal and see the levels on the bar counter. The incoming signal level can be adjusted before the hearing, so don't expect the channel fader to do anything that is not (as expected). You simply route the signal to the entrance and not to a preamp as such. Input signal is via the setting of the peak of Sound Devices If you need to adjust the levels.

  Excellent.

• Help - arm for record?

  I use Adobe Audition 3.0

  I have implemented some mp3 tracks using multi track Viewer, as a trailer.

  I want to record and save this, but there seems to be a problem that when I click on the record button it immediately says "at least a track must be armed for recording". I then look at each track where it says 'R' in small, and when I move the mouse, he says "arm for record." However, I can't click here because it is gray.

  What should I do? How can I burn this as trailer, I don't want to use the microphone to record my voice, I want to just this trailer to be saved in MP3 format, so you can go on the disc. The last time I did the trailer was on Apple's Garageband and I wanted to save to save the final version and was OK. I haven't used micro because I did not need to use the voice.

  Please help me, I would be grateful.

  I could be wrong, but I think you're talking about mixing multitrack files in a single stereo file.

  To do this, click on edit in the menu and final mix, all stereo tracks.

• Can arm for record

  Hi all

  I use Audition 2.0 for a while now, and it has been generally smoothly until recently.  He always ignored when I was recording, but I attributed this to my sound card, so I lived with her.  But last night after that I messed around with the edit-> Audio Hardware Setup, I could not arm to record more.  Anytime I tried to press the arm for record button, nothing happens.  It remains Gray and never turns red.  The thing is, this happens only in a project.  If I open a new session or old log, I can arm themselves for registration.

  But I don't want to open a new session, because I've worked on this session for some time.

  I searched on the net, and surprisingly, I have not found someone with the same problem.  Is there someone who could not arm for record here?

  Thank you

  On each track, in the input box (right pointing arrow) you see your selected entry named?  For example, mine says now "[s] Microphone" (stereo recording on built at the microphone".

• DNS records in the VCS - ARM deployment

  Hello team cisco,

  Regarding a deployment on VCS (control and Highway) - Mobile and remote access, I saw in the guides from cisco that there is some DNS records it should be implemented in your public DNS host and private, however, he is considered by our team work, this step may be omitted if we put the IP address directly. It would be posible or necesarely I have to configure DNS records?

  Respect of

  Bill

  Hi Jose,

  as I said in my previous comment, you must advertise the documents.

  Yes, you will need to announced records and SRV deployment of the e-highway.

  Thank you

• Make the midi recording when the track is not selected

  Hi, asking for my friend and will try and find a solution when I get home, but...

  My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.

  So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.

  Thank you very much

  Looks like you entered only followed for the targeted track has allowed...

  This picture isn't in X 9 - but it's the same setting...

  Make sure that this is not the case-

  

• Apple Watch does not record the duration of the exercise in the fitness rings.  Is there a solution?

  LLA exercise fitness ring does not workout time.  Is there a solution?

  Hello

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk.

  This applies both in general everyday wear and during the recording of training through the app to training sessions. It is possible that your training did not meet this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  In general everyday wear and when your iPhone is not taken along on some workouts outdoors, the application of the activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally when you move and during training.

  Calibrate your watch can improve the precision of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• problems by recording the activity without signal

  I was walking in the Scottish Highlands.  I was wearing my Apple Watch one carrying my iPhone 5.  There was no signal (not in any form: no GPRS, 3 G, etc. - the message at the top of the phone was 'no service'.)  My walk lasted at least an hour.  Later, I noticed that the watch was told that I had only been active for 6 minutes - despite quite fast gong uphill.  Is this unlikely due to the no signal problem?  I'm saving that the watch can work (in a limited way) if I do not take an iPhone to run, etc. but it can work to track activity, if there is 'no service '?  I did not use the Green running Apple app person nor any other part 3 (like Nike +).  The is the first time that I have been out of reach of any signal at all and the first time the activity did not seem to accurately record.  The two things are related?  Thanks for any help, much appreciated.

  Hello

  Every minute movement equaling or exceeding the intensity of a brisk walk taken into account in your daily exercise goal. The definition of a brisk walk varies from one person to another and depends on your personal information.

  To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > Edit - tap and adjust the settings, then press on in fact.

  If you take your iPhone with you and save your market as a workout through the app drive, data GPS can be used (if you have enabled location Services) to estimate your distance and pace. Otherwise, it is important that your arms swing naturally as you walk, because the watch relies on the movement of arms (identified by the accelerometer) to follow the movement.

  Calibrate your watch will allow him to estimate more precisely different results related to the activity by teaching how your arm movements relate to "Stride" lengths at different speeds. During calibration, ideally walk on flat ground. Otherwise, you could appear have moved less away (from GPS data) that you've actually done (if climbing and descent from the hills).

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Arm movement is recognized as steps in the application of the activity on the Apple Watch?

  Happy new year to you all

  I am the happy owner of a Apple Watch OS2.1 running, but I think that the watch records the movement of the arm as the steps in the
  Fitness app?

  Today I was at my desk and moved no more than a few times get coffee (10 steps), the application of the activity
  the clock tells me that I moved 1 659 equal to 1.47 KM steps and I have
  a hard time to see this may be correct (work of my office at home, so basically
  went to my room to my office (max 50 markets)

  I calibrated the watch with 2 x 20 min outside walks with my phone with me and correct installation
  the data GPS on my phone, but the problem is the same, someone else has the same type of questions?

  Look forward to the thoughts of entry or comments, you may have.

  Hello

  Happy new year!

  In addition to the calibration of your watch, it is also important - for more accurate estimates of activity - to ensure that your personal information is correct. To verify that it was entered correctly and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).

  However, it is possible that the numbers you quoted are correct. Even with a relatively sedentary lifestyle, regular movement around the House or at work can soon add up.

  To check the data behind the totals:

  -On your iPhone, in the application of health (not the application of the activity), go to: health Dats (tab) > Fitness > steps.

  -The graph shows your steps per day, week or month (use the tabs at the top to change that).

  -Press show all data to view data for each day.

  -Tap on a day to see each data point, along with the data source (for example, iPhone, Apple Watch).

  When you present data in the dashboard, where data for any particular measure were available from several sources at the same time, the only health of them, app chooses automatically in order to avoid double counting.

• Apple Watch accurately record not treadmill if you want Media? This is necessary for me.

  I am close to buying an Apple Watch. I have a question to resolve, however. I do most of my not on a treadmill, but since I have neuropathy I have to hold the rails for stability when doing the exercises.  As much I calibrate the watch according to the instructions will be steps accurately Records while now on? I've been to search and read on the watch, but did not see this issue addressed directly.

  I much appreciate the comments of all those who use the watch in this way and can tell me to experience first-hand how it works.

  Thank you!

  Hello

  The calibration process involves Apple Watch learn how the movement of the arm is different in each typical market user or running speeds. When the iPhone is taken over the market in open air or Run workouts (such as recorded by the application of training), the watch's built-in accelerometer is calibrated using the GPS speed and distance information obtained from the iPhone-based.

  This allows Apple Watch learn how the movements of the user's arms relate to their typical stride length. The watch can estimate then more precisely the various fitness and results related to the activity - including those workouts where the GPS data are not available or not relevant (for example, the domestic market / focused on the treadmill workouts).

  When you hold down the rails rather than your swingarm treadmill, so you find that some training results are saved with less precision (with the exception of calorie burn, which relies mainly on heart rate during the training indoor sensor).

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Your best solution may be to try to watch and see how it works for you. In the United States (for example), in the direct purchase of Apple there is a standard 14-day return policy:

  http://www.Apple.com/Shop/Browse/open/salespolicies

• Electric trigger DAMA IQ & check for new records to collect an infinite number of records

  Hi all

  I have some difficulties with the help of the trigger edge power IQ & questioning the DAMA if it has samples/records ready for pick up.  I have reviewed the documentation on the support to the screw and the examples provided with the driver of the ACCA and have not been able to solve my problem on my own.    What I'm trying to do, is to have this VI capture periodic RF bursts that are larger than a specified threshold.

  I go to this topic in the following way:

  I put the number of samples I captured (finished) for each burst which crosses the threshold
  I put the number of records to capture to be infinite
  I said that the rising slope and the appropriate threshold
  I have then to validate the configuration of the ACCA and start acquiring
  I have then go into a loop and check the backlog of samples as well as the acquisition is
  If either of the above is true then I get the samples with the IQ extract complex WDT vi
  I continue looping until the user stops the vi with a button on the front panel
  I went on this path that I didn't block indefinitely or for long periods of time

  What I see is:

  I'll take one shot and then nothing else
  what the samples never back above zero
  that acquisition is ever complete
  If I switch out the IQ extraction with equivalent IQ reading and ignore the completion back & I get documents like I expect

  My understanding is as follows:

  Electric trigger IQ does not have to be re-armed in VI
  that each trigger to fire IQ Power will create a new record containing the number of samples that I asked

  My questions:

  It seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?
  I receive multiple records pending upward on the ASB using this configuration?
  Why a record number is provided with the back of fetch get VI?
  Why would I pick any folder, but the record of zero?
  I'm doing something wrong here?
  Is there a better way to do this?
      
  Thank you
  Russell

  Hi Russell,

  You are on the right track to get your application do what you want. Instead of check to fetch back, I suggest that lets you read the property node DAMA the "' Acquisition > Fetch > Records made" property to know when a new record was acquired. "

  > it seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?

  That is right.

  > I get multiple records pending upward on the ASB using this configuration?

  Yes

  > Why a record number is equipped with the rear of fetch get VI?
  > Why would I pick any folder, but the record of zero?

  You ask DAA for an infinite number of records. File 0 started the first trigger seen. Record 1 to the second outbreak (end of disk 0) and so on.

• has no success of body to toggel Port0 and Port1 aboard MCB2300 using LV for the ARMS?

  I'm trying to toggel the GPIO (Port0, Port1) on the evaluation package of MCB2300 with LPC2378 uController aboard by using LV8.6. These two ports seems to have no programmable features with the help of 2 Ports NV., 3 and Port4 work well. If any body got these two ports in the work, so it will be great if you could post a functional LV or C code here in the forum.

  I will be grateful for any suggestions or advice.

  Greetings

  Hello AMD.

  I posted the solution to this elsewhere (although I admit that it is not easy to find).

  Here you go: http://forums.ni.com/ni/board/message?board.id=420&message.id=1185#M1185

  In this post, I am referring to the evolution of the model for the generic lpc2378 target project.  If you use the target of MCB2300 (as it seems you are), you need to open the project to C:\Program NIUninstaller Instruments\LabVIEW 8.6\Targets\Keil\Embedded\RealView\MCB2300\Template\Project\LabVIEW.uv2

  The side effect of this change is that the LCD on the MCB2300 no longer works (as it activates / deactivates the GPIO slow/legacy records).  So you can either return the above changes or modifies registry addresses in the LCD display driver to point to the fast GPIO registers.

  This problem should be solved in the next version of LabVIEW for ARM.

  Good luck

• Type with the Smartband ON is recorded as of the steps

  LifeLog version 2.9.B.0.31
  Xperia M2 (D2303)
  Smartband SWR10
  5.1.1 Android

  Type is saved as steps... If it is not clear to you, here is the additional explanation

  From 15:00 until the 12midnight, I'm at work and made a lot of computer by typing but said those intervals has a large number of steps recorded on the application of lifelog. Yet once again, I am any implementation to my office and did a lot of typing and yet they are counted as the steps. Any suggestion or any project for improvement of this part?

  Only one and that is to remove - it is not a fault as such, but the movement of the wrist which is considered to be the same movement as a step, because the way you move your arms etc. when walking

• Highway Testing certificate for ARM

  Hello

  We are currently testing for Core Expressway and Edge certificates.

  To give you an overview on the current configuration, the edge of the highway is deployed only DMZ (single NIC) and its IP address is coordinated to the public IP address. The core of the Express way communicates with highway with its internal IP 10.100.100.1 and not the IP NAT. Configuration area of track Express Core customer journey, the peer address configured is 10.100.100.1.

  We have set up two zones traversal - ARM and B2B.

  Traversal B2B area is active but MRA is inactive and TLS not created due to issues certificates.

  We have generated CSR on highways and let what he signed by our internal CA for test only. But in the actual production, we will move CSR from the edge of the highway to the public CA for signing.

  We have already downloaded the certificates signed by our internal CA for highways as well as the root certification authority.

  But the test of course secure control, we had this problem:

  cannot_verify.PNG

  

  We need to enter the FULL name of the edge of the highway and not its IP address when you test the secure course? Because when we're looking for the FULL (edge.external.com) domain name it is said to be inaccessible. Or because there is no communication between the base and edge on the FULL domain name? Should we allow core contact Expressway edge FQDN?

  We already created Expressway on DNS FQDN outer edge and can be solved with his (public) IP NAT. SRV records have already been created on external DNS as well.

  Please advice. Thank you in advance.

  No probs, it's time to give back to the community, I started! :)

  OK, with a single NIC, both your internal and external DNS for the edge of the freeway entries must resolve to your external IP address.

  Your firewall must then perform the reflection of NAT when Expressway Core communicates with edge he does not go straight up to your ISP but rather internal rest.

  If you had double NIC for Edge then internal DNS for Edge would point to internal private IP (inside the NETWORK card) so therefore avoiding complexity around NAT reflection.  I much prefer this scenario and it is easier than what you see two deck troubleshooting network captures.

  Adam