System USB not recognized

Similar Questions

• "Usb not recognized" keeps blinking and endangered

  Hello, the notebook of a colleague, she has the message "USB not recognized" that appears for a few seconds, then disappear. Sometimes it will come back repeatedly, sometimes he disappears for long periods of time. When I was reviewing its system, is come/gone several times, disappeared for a few minutes, then flashed again once again.

  She uses a laptop HP ProBook 4310 S. It uses two USB ports. One for its wireless mouse and the other to a Kensington Displaylink (allows for laptop > Displaylink > external monitor via the USB port), who worked without interruption throughout my check.

  Any thoughts?

  Hi phill.

  I suggest an update of the s chipset driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3974410&prodTypeId=321957&prodSeriesId=3974409&swLang=13&TaskID=135&swEnvOID=1093

  You should check to make sure that it is your laptop model.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• both bluetooth and usb not recognized, couldn't able to start and shut down properly. The message of the usb not recognized

  popping up the message usb not recognized. It occurs when the network was slow and tried to disconnect internet directly unplug and plug the usb between mobile phone and pc. then it does not go away even system restore has been made. In addition, the bluetooth does not work. When I stopped PC properly but it will restart. at the same time when I start it up, but it does not occur. I closed again and then start again and works. However, it appears the message usb not recognized frequently.

  To start with, try running the Fixit USB, here http://support.microsoft.com/gp/hardware_device_problems

• USB not recognized on Windows 7

  Hello
  I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
  PLS, can you help me to solve this problem?

  Hello

  What model of laptop do you have?
  On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

  In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• Device USB not recognized (malfunction)

  I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp

  Hello ~ thanks for the reply.

  Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!

• FAT corrupted USB not recognized

  I have problems with my rocket GB 8. This morning, while trying to fix my flash drive I accidently deleted the partition off my rocket. Of course, now I'm reeciving 'Fat corrupted' error on my fuse and USB will not recognize. I've searched high and low. I tried to power it in 20 seconds, put the "rocket" on hold, then press on the< rewind="" button="" (and="" center="" buton)="" while="" connecting="" the="" usb="" and="" i="" still="" receive="" the="" usb="" not="" recognized="" in="" windows="" (xp,="" vista="" &="" 7).="" i="" even="" tried="" using="" my="" wife's="" laptop="" with="" vista="" with="" the="" same="" usb="">

  Please tell me I didn't have the toast when I messed up the partition! Help!

  Finally, after the persistence, I got the computer to recognize the "rocket". Managed to format to FAT32 via Windows without any problem, then via the "rocket". All is well now.

• Deviice USB not recognized. Help, please.

  So I have this Freecom 500 GB Portable external Hardrive and I have used it for several months now. It worked fine on my laptop and other computers, I'll until recently, when I plug it says: ' "USB device not recognized.". I click on the USB icon and it said: "one of the devices attached to this computer has malfunctioned, and Windows does not it." he has never done this before. In addition, there was a 'recommendation' which suggests I 'try to re-connect. If Windows does still not it, replace the device. " So I tried and tried (reconnection) but it's the same thing. USB NOT RECOGNIZED. I tried on the laptop of others and computers and the same thing happened. I have important documents stored on this hard drive... I don't think that the computer is at fault, rather my hardrive, but I'm not sure. What do you think? And are there ways I could solve this problem?

  Hi Elysem,

  As you have checked the hard disk on other computers and it gives the same error message that means there is a problem with the hard drive so I suggest you contact the manufacturer of the hard drive to get help.

• Peripheral intermittent USB not recognized problem in loop

  Hello

  I have a Dell Precision M6500 laptop in a docking station with a USB keyboard and mouse attached running Win 7 Pro 64 bit.  Most of the time, the machine works fine without any problems, but sometimes, Windows will in this tight where loop every few seconds, it appears the dreaded ball peripheral USB not recognized - even if I have not added/changed and the USB device on the machine.  I tried to disable the device, uninstall the driver, etc, but nothing I do seems to fix the problem.

  Please help because it drives me crazy.

  Thank you

  Robert

  It turns out that Dell thinks it's a hardware problem.  Theyu replaced the docking last week and that made it better for 3 or 4 days, but now he's back.  They will replace the motherboard this week, so we'll see...

• USB not recognized on the computer. Error code 43.

  Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43

  Have you tried the new usb - port, nothing works

  Thank you

  We uninstalled the printer and then tried again the USB and it worked

• Setting up c4795 all in one printer - usb not recognized?

  When I try to put my c4795 hp software tells me to connect the printer to the laptop via the usb port (to connect the network settings to the printer).

  When I try this, I get the message usb not recognized on my laptop and am not able to continue the installation?

  Thank you.

  Yes, it must be connected

  Start > Device Manager > and get these unknown devices or devices that has this!

• keyboard USB not recognized.

  Yosemite on iMac 27 in.

  Following a system freeze (screensaver is the alleged perpetrator), the usb keyboard is not recognized.  The mouse works in all ports and when it is plugged into the keyboard. IPhone recharges also through the keyboard. Recovered last time after several reboots and keyboard buffering in after start-up.  This time, no luck. Next steps?

  Hello

  I had EXACTLY the same problem.

  New iMac and USB keyboard. He works first and the iMac would stop then find the keyboard.

  I tried to reboot several times, but that did not always help. My Bluetooth mouse doesn't work. I get to the login screen and I can't type my password (because my keyboard is not be found). I get a message on my screen that the bluetooth keyboard is "impossible", when I don't have a bluetooth keyboard and my USB keyboard is plugged. I tried all USB ports, no luck! I just found a strange way around the issue. I used a keyboard extension cable to plug into the same USB keyboard and it works now. No logical sense... I hope that this might work for you too. Good luck!...

• Satellite X 200-252 Flash disk to USB not recognized

  Hello.

  Once I plug the USB to the USB flash drive, system will try to find the driver, but in vain.
  External USB HARD drive œuvres.

  Toshiba Satellite x 200-252/Vista 32-bit

  You mean that your external USB is not recognized if you connect it to the laptop
  I had this problem too
  In my case, the solution was simply;

  I have disconnected all external USB devices.
  Then, I saw the Device Manager and all USB host controllers and USB root hubs removed from the list of devices.
  Finally, I rebooted the laptop and after a short time all USB devices have been installed again.
  Then I plugged in the USB and it has been recognized correctly.

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.