SX2210T monitor in windows 8.1 contactless touch

Similar Questions

• Monitor 23tm Pavilion reacts to the touch

  I bought a new HP Envy with windows 8.1.64 and a monitor of 23tm Pavilion.  I installed the drivers for the monitor, but the monitor still will not respond to touch.  I went online and downloaded the drivers from the HP site, just in case they were more up-to-date that came with the monitor.  But it still doesn't work as a touch screen, like it's supposed to.  Any ideas?

  I just went through two sets of technicians update of drivers.  Activation and deactivation of devices.  Nothing seemed to help.  I have notified the technicians that I am connected via an HDMI cable.  Windows reported no touch input available on this computer.  In the system information screen.

  I realized suddenly, Hey, hasn't this monitor come with a USB cable?  Plugged in, and it started working after a re-boot.  Duh.  None of the technicians asked about the usb cable.  They concluded that it was a bad screen.

• Accidentally disabled monitors on Windows 7. How to make this work?

  * Original title: accidentally disabled monitors

  My husbands office has windows 7 and I accidentally disabled monitors... it has two... do not know how I did, what I'm doing now, I tried to restart it by turning it and turning it on but I can't find a solution in safe mode... what I do now.  Shouldn't have touched, but I did.  Don't tell me to restore it... He didn't not to create a... Need advice ASAP

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  It is possible that the dual monitor settings have changed.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions in these Microsoft help articles and check the issue.

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Guided Help: Setup dual monitor is easy in Windows 7!
  http://support.Microsoft.com/kb/976064

  Method 2:
  Use the suggestions in these articles and check.

  Change settings display on multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
  (Also applies to Windows 7)

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions
  (Also applies to Windows 7)

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems
  (Also applies to Windows 7)

  I hope this helps.

• PC HP 8560w: second monitor with Windows 10

  I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?

  Thanks in advance.

  Coltrane22

  I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card.  Before that I did, Win10 has not even seen the monitor.

  Good luck

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• Impossible to multi monitor in windows xp

  I got a PC by a family member and wish to multi monitor. Indicates the PC have windows XP. When I access the control/display panel etc. There is no available in multi monitor option. I've never experienced this before. Can someone give me advice please on what do I do?

  Hello

  What is the brand and model of the computer?

  I would like you to follow the steps in this article.

  How to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

  I hope this helps.

• I have a Toshiba satellite click W35Dt A3300 is a touch screen and I want to know if windows 7 comes with touch screen pack

  * Original title: need info

  I have a Toshiba satellite click W35Dt A3300 is a scree touching one I want to know if windows 7 comes with the pack touch screen or I have to download a package of contact after that I have download windows 7

  Do you mean this - http://windows.microsoft.com/en-us/windows7/whats-the-microsoft-touch-pack-for-windows-7

  If Yes, - "Touch Pack comes preinstalled on some multitouch in Windows 7 PC, but it is not included in Windows 7. The Touch Pack is available for download from the Microsoft Download Center. »

• How to change the ID ID/monitor display or erase display ID/Monitor ID Windows 7

  Have a problem that sometimes appears.

  Setting up workstations to work with multiple display monitors, its part of my job...

  The real ID monitors get Windows isn't usually a problem, most programs can adapt to the windows settings and fine.

  BUT some of the systems we run sends commands and tips based on the actual number of the display, the number which appears on the screen when you click on the button "identify" in the Office/display-settings of the control panel.

  Allows to call the ID of display equipment

  the computer, or windows remember display´s EDID and stores the monitors already plugged into a list?

  If I installed the monitors/screens in the order correct, everything is good and works as we wanted.

  Then, it happens a brakes display or switch place for a reason, or perhaps a driver update resets the display list and windows starts now monitors in the wrong order.

  the monitor 1 want to have HW - ID 1 to now HW - ID 2, and everything is false, messages and orders now find themselves on the wrong display.

  We have 3 options.

  1. fix the HW - ID display

  2 - re - configure the system and what it includes and hope that he will not return to the display switch change or updated driver.

  3 - re - install windows and hope that it shows the correct ID and continue with client applications and so on.

  I discovered that it is stored somewhere in the REG-Edit, but it is impossible to find the right place

  After talking to HP, they do not support such things... try windows-problem, with a clean install... c - my I switched to a screen!

  Tried to clean facilities of AMD and Nvidia driver for graphics cards, worked for a time, until I restarted the machine, back to square one...

  Then they ponited at Microsoft.

  After talking to Microsoft Support they do not support such things...

  I don't have the skills, but I can't be a problem with a script that removes the EDID reg-edit list after a reboot?

  then it would be not so complicated, simply:

  Unplug everything except the display that you want to be number 1
  Run the script

  reset

  connect the display 2 and so on?

  Hello

  I understand that you are not connected to the domain. But it seems you're a developer and you try to change the logical numbers of monitors/screens. This is why it would be better suited in MSDN Community.
  http://social.msdn.Microsoft.com/forums/en-us/categories

• Using two 2 monitors with Windows 7

  I try to use 2 monitors with windows 7 for my wife can work at home connected to the workstation via the vpn.  We are able to use two screens while workinig offline (for example. Able to drag and use programs from one screen to another).  However when it is connected to his work station we are not able to drag and use both programs on different screens.

  On Fri, 24 Sep 2010 12:53:35 + 0000, Safert39 wrote:
   
  > I try to use 2 monitors with windows 7 for my wife can work at home connected to the workstation via the vpn.  We are able to use two screens while workinig offline (for example. Able to drag and use programs from one screen to another).  However when it is connected to his work station we are not able to drag and use both programs on different screens.
   
   
   
  Right. If I understand what you're saying, you can
  not do it.
   
   
  --
  Ken Blake
   

  Ken Blake (MS-MVP)

• Excel on two monitors, the window is uneven

  I use Excel like this for years and never had a problem. Received a new computer with Windows 7 and Office 2010. Now, when I minimize Excel and stretch it across my two monitors, the window of excel is more horiztonally even on both monitors. In the secondary monitor, the bottom edge is higher than the lower edge of the primary monitor of 2.5 inch.

  Help, please.

  Hello

  For several years I have seen the problem that shows your image.

  You can see in the picture the monitor of the number 2 is offset, vertically with respect to the number of monitor 1.

  You can move the monitor autour images using the mouse in the same way as you would move a shortcut on the desktop.

  Place the mouse cursor on Monitor 2, hold down the left mouse button and drag the image upwards slightly until it is aligned with the number of the monitor 1.

  Click apply/OK.

  Test and let us know the results.

  Concerning

• Split-screen on one of the two monitor in Windows 8

  I know how to split the screen on a monitor. Now the problem is that I have two moniotrs, when I drag a window on the edge on the left, it automaticlly take half left of screen, however, when I drag another window at the right end, the window through the right end and jump to another monitor. So as to have a program takes half left screen monitor 1, a program takes half right screen monitor 1 and one program takes full screen on Monitor 2? I'm runnning on windows 8 pro.

  I know not 'technical' solution to this problem, but I use multiple monitors with windows for years and your best bet for now is this little trick.  Find an edge where the window will be 'snap' and autosize, then positioned manually on the "inside" edges of your dual display.

  http://www.7tutorials.com/how-snap-Windows-side-side-dual-multi-monitor-Setup

  This explains how do with the windows shortcut keys instead of with the mouse

• No signal on monitor after Windows 8 logo

  I have a Lenovo H430-2558-1ZU desktop computer running Windows 8 Pro with Media Center. I used it all of a sudden the video was cut, then I had no signal on the screen. I restarted and after Windows 8 logo, I get no Signal on the monitor. Windows 8 is running because I can hear sounds from the speakers. After using this method, I started in safe mode. I uninstalled the graphics card driver Intel HD of safe mode and restarted in normal mode. It was fine for a few minutes, but then I had no signal on the screen. So I started in new safe mode and uninstalled the driver. I installed a new Web site driver for intel, but I still have the same problem. I tried uninstalling the driver for the monitor, but still have the same question. The monitor is connected to the computer via a XtremeMac HDMI to DVIHDMI port. The monitor is aViewsonic VX1945wm I used for many years. I don't think that it is a hardware problem, because my Ubuntu install works fine. I am at a loss here, IDK what to do. Help, please!

  I solved the problem. I plugged the monitor into the computer via VGA and it works beautifully. So I disconnected the VGA cable and reconnected the cable hdmi to dvi, and it is worked over HDMI since. Even after rebooting. It's a weird solution, but I'm glad it worked.

• Then VMware monitor a windows service?

  Hello

  Then VMware monitor a windows service? If so, what measures can be taken if the service is stopped? do we have additional vmware product need or license?

  Thank you.

  You must rely on third-party tools for monitoring windows services.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Windows 8.1 and touch screen monitor

  Have a HP computer with Windows 7 ultimate that we will upgrade to Windows 8.1.  It is 32-bit.  A newly purchased touch screen would work with this computer?  It has display NVidia GeForce 8500 GT.

  Hello René,.

  What is the number and the model of the touch screen that you want to buy?

  If there are drivers available for Windows 8.1 from manufacturers, you shouldn't have problems connecting to the monitor.
  Also check if the hardware is compatible to windows 8.1
  See the link below:
  Compatibility Center
  https://www.Microsoft.com/en-in/Windows/compatibility/CompatCenter/home
   
  I hope this helps!