E3200 with a device of USB 3.0 storage 4 TB

Similar Questions

• I have two devices gpib-usb-hs; two of them work in MAX, but will only work in labview, help please?

  Hello

  For my application, I need to communicate with two instruments by using both devices gpib-usb-hs. I use Windows XP, Labview 6.1, MAX 5.1 version and NI488.2 version 2.42. I checked and this ni488.2 driver should be compatible with my devices gpib-usb-hs and my versions of windows and labview. I also tried versions older and more recent NI488.2 without success.

  I can communicate with my instruments properly in MAX, tell me that the devices themselves are functional. When I try to connect with my instruments using labview (using the example of gpib of labview), only devices gpib-usb-hs communicates with success. The other device returns the EDVR error: connection to the device or driver error.

  I don't really know where to go from here. The only thing I found strange was that the gpib-usb-hs work was has an alias name assigned visa while the unworking device does not. I tried to give him an alias name, but this did not help.

  Any suggestions would be greatly appreciated.

  There are many free tutorials on GPIB. It should explain how the various instruments can be connected to a single controller.

  That being said, even if it's unnecessary, you should have no problem with multiple controllers on the same pc. The two being connected, they pass all the tests in MAX? You are using an old driver and seem to have tried several different versions. I suspect a driver issue, and I advise you to uninstall all the drivers GPIB and VISA and then start again. But not all necessary can be done to satisfy your curiosity.

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• A USB cable will work with any device?

  Title: USB cable original

  Hello.

  Let's say that a SCART is not equipped with a USB cable.

  Is a 'universal' USB cable to work with "any" device USB or different types of devices have different types/forms of USB cables?

  Thank you.

  USB is pretty universal.  The flat rectangular plug that goes in your computer is known as a 'Type A '.  The square plug that usually goes into a printer is a "Type B".  There are also small connectors (Mini-A, Mini-B, Micro-AB, and Micro-B).

  <>http://en.Wikipedia.org/wiki/USB#Connector_types >

  Generally, if you find a cable with the appropriate connectors, this will work.  If the device to which you are connecting does not fall into a general 'category' (e.g. mass storage devices), then the driver software may be necessary at the end of the computer.

  HTH,
  JW

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry software please update link (or the BONES of BB10) connection to connect to a device via USB with Powershare BB10

  After reviewing many topics:

  https://supportforums.BlackBerry.com/T5/BlackBerry-link/BlackBerry-link-no-device-connected/m-p/2515...

  https://supportforums.BlackBerry.com/T5/BlackBerry-link/link-won-t-recognize-Q10-on-Mac/TD-p/2912982

  http://forums.CrackBerry.com/BlackBerry-link-F300/BlackBerry-link-Windows-8-1-cannot-recognize-black...

  I discovered that the problem of not recognizing device with link performed from USB (2.0 and 3.0) port with Powershare function.

  I don't think it was the problem of the computer (laptop) with this feature because it will be a trend now.

  So please update link or BB10 OS this link can recognize peripheral BB10.

  We look forward to good news from Blackberry!

  After the 10.3.0.1418 (sunk), now the link and my BB Q10 is connected!

  Thanks to the 10.3

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• HP w2558hc monitor has a webcam and microphone and several other devices, a usb hp dpf device its saying is not not up to the standard ATA and its says that I have to get woth 3.manufactuere on an update of the firmware

  the monitor HP w2558hc has probles in invironemnt MS7 hp pc doc when you have the web cam pluged you get 3 errors, everything goes back to the devices in the monitor and it takes the current drivers for the devices in the monitor.  MS7 microsoft must get the drviers for this device, the bits of worsk web cam report of errors with the devices when its plugged the webcam has its own cable usb cable, he dislikes this donor ms7 pilots it. We have attached to delteing the drovers for devices and you get errors in the doctor of hp, it is said that he needs a firmware updat ATA standards.  HP no has no drivers for this and ms7 even when you the old drivers and let windows find them they are incorrect.

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 802.11 wireless pen drive recognized as 'unknown device' under USB. Help, please.

  Specs: Windows XP Home Edition version 2002, Service Pack 2. This is the version of XP OEM. Processor Intel pentium 4 2.00 GHz. 1.50 GB of ram.

  After an unknown incident (i suspect headphones usb), my wireless USB key has ceased to be recognized as such and become everything simply an "unknown device" under "USB bus controllers. Although windows tells me there is no drivers for the device installed, the wireless pen drive is signed with the Publisher of Microsoft Windows with a version of driver 5.1.2600.0, Microsoft being the driver provider.

  Compound number, the 802.11 device is listed under "Other devices" when 'show hidden devices' is selected and the variable "devmgr_show_nonpresent_devices" entered "environment variables", but is washed out-showing that the system thinks that the device is not currently connected to the computer. In addition, under details, it displays error code 45: the device is not connected to the computer. And it is. It's very hip. as cement and connected tape.

  I plugged the wireless key USB in all the usb ports on the computer, every time with her recognized as 'unknown device' under usb controllers. I entered in the safe mode, uninstalled all the usb controllers and root usb hub drivers and let windows the respawn after reboot in order to solve the problem. No dice.

  I also plugged the USB in a different desktop and it works like a charm, so the issue is not with the hardware.

  Clearly there that a conflict with drivers/registry/God knows what, but I'm at a loss. Somehow, windows has taken its decision and the player associated with "unknown device" and I see no way to make the system "forget" that the USB was never connected. How can I remove the ghost driver "unknown device" manually or force windows to re-associate the key wireless USB with "other devices" (with the yellow? mark) and not this useless usb driver "unknown device"?

  Thanks for the help!

  try to run the following tools in series:

  1. http://support.Microsoft.com/GP/hardware_device_problems
  2. http://support.Microsoft.com/kb/817900 (Microsoft Fix it 50052)

  I suggest you uninstall the drivers for Bluetooth, fingerprint usb controllers and the sensor. Then reboot the computer this should install it the appropriate drivers for it.

  Here's how you can do:

  1. click on the Start button > run > type devmgmt.msc and press ENTER.
  2. locate each USB device, the after another and then right-click on it.
  3. Select the option to uninstall.
  4 restart your computer.

  Alternatively, you can try to install the driver chipset for your computer.

  Hope this information is useful.

  If you get the answer to your question, please go back and mark the reply as an answer while others may find it.

  If you get helped by a response to someone else's question, please indicate the useful post.

  S.Chatterjee

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Suspension device: incoming USB USB not suspend - preventing Windows 7 Pro x 64 suspension

  Recently, my Windows 7 partition has refused to go to sleep or put into hibernation. I searched and found that I needed to run 'powercfg-energy', I did as I tried a sleep.

  It turned out that the USB hubs apparently kept the Windows of sleep (even if this has not been a problem in the past). So, in response, I removed my USB mouse connector.

  The number of errors is passed against 5-3. Now, remaining only the following:

  Errors

  Suspension device: USB USB not falling suspend

  The USB device is not in sleep state. Processor power management may be avoided if a USB device is not in sleep state when you are not using.

  Name of the device	USB mass storage device
  ID host controller	PCI\VEN_10DE & DEV_077C
  Location of the host controller	PCI bus 0, device 2, function 1
  Device ID	USB\VID_0BDA & PID_0158
  Path of the port	1

  Suspension device: USB USB not falling suspend

  The USB device is not in sleep state. Processor power management may be avoided if a USB device is not in sleep state when you are not using.

  Name of the device	USB root hub
  ID host controller	PCI\VEN_10DE & DEV_077C
  Location of the host controller	PCI bus 0, device 2, function 1
  Device ID	USB\VID_10DE & PID_077C
  Path of the port

  Use of the CPU Utilization: processor is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.

  Average use (%)

  7.16

  My guess is that the 'USB Mass storage device' is my integrated laptop card reader. I found in Device Manager and then disabled and uninstalled, nothing helps.

  So what now? I've never had this problem before - why it seemed now?

  Well Alrighty then. I set myself, through the observation of AndyWalser here.

  I had recently installed SUSE 11.2 x 64. I thought that this would in any way be related since it was apparently USB. Turns out that, for some reason, with GRUB as the boot loader, it UN-brands Win7 partition as "Active". At the moment I have re-marked as active sleep and Hibernate worked without a hitch.

  If anyone has similar issues, just go to computer management > disk management and brand the Win7 partition as Active.

  The real question, however, is what has to do with the USB not suspending do not at all.