E530: is not completely shutdown/restart/sleep/setting Hibernate

Similar Questions

• I can still access my Manager tasks, Shut Down, restart, sleep, and Hibernate options went on the Start Menu After uninstalling Secure browser review.

  I recently downloaded Secure browser review for a test in Spanish for a class.  I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu.  Finally, before taking the test, my computer is always locked.  This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock.  Now, it does not require a password, or it is not locked.

  I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return.  Help, please!

  Original title: Secure Browser review

  Hello

  Do a system restore, if necessary in Safe Mode, until you have installed the browser...

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Problem with the HP Pavilion e033tx-15 Notebook shutdown/restart/sleep

  I had windows 8 OS 64-bit working fine with my HP Pavilion Notebook 15-e033tx.

  I had problems, so I decided to update my drivers. I already had BIOS VersionF.08 and the hp support page has shown that there is an update of the bios to VersionF.21.

  After updating the bios the problem started when I stop lighting and the laptop into sleep mode kindof. I have to hold the switch down to foce him close. If I restart it, it says "reboot pc", goes blank and then all power off, and it's not stopped.  and if I SLEEP, he's not waking up.

  I rolled back the bios and it fixed the issue.

  Then I freshly installed win pro 8.1, and it has only VersionF.21 of the bios available.  Same problem again.

  HP Support Assistant showed that a new bios update Insyde F.22. But the problem is still there.

  I searched other posts with similar problem and I can't seem to solve this problem. Help, please.

  Henrico Hello and welcome on the HP Forum!

  I understand that you have a problem with the BIOS.  I'll try my best to help you solve this problem. I suggest following the procedure described in this document for the restoration of the BIOS .

  If this does not resolve this problem then restores the version F.08 http://support.hp.com/us-en/document/c02693833 driver it should always work for Windows 8.1.  Here is a document for more information of the device to Windows 8 Manager which explains how to roll back the driver. It will be the same steps for Windows 8.1.

  I suggest Using HP Support Assistant (Windows 8) to change your settings for manual update. This allows you to choose what you want updates.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• "Windows could not complete the installation", Y510P

  Hello

  Just got my new Y510P and realized it's impossible to start Windows.

  Initially it displays error "Windows cannot parse or process Unattend...» [... \unattend.xml] [oobeSystem] pass... »

  After reboot he start to display a different message - "Windows could not complete installation, restart the installation.

  The operating system is Windows 8.1.

  Looks like I'm not the only person having this problem. System recovery does not help, of course (as well as the graceful Lenovo tech support).

  I think that the problem caused by the incorrect unattend.xml file that fails to install any software because of this error and unnesessary blocking Windows to complete the installation.

  I see no other way rather than installing Windows from another source. I don't want to pay for another Windows license and instead return the Lenovo laptop, but perhaps there is another way?

  Problem solved.

  I contacted Lenovo support and they offered me to send recovery discs I received a few days later. I installed the cleaning system of records and have not experienced any problems since.

  I'm still not fully satisfied because I cannot reset the laptop to the factory settings without these discs, but I think I can live with that.

• Cannot install Age of Empires II, it is not complete the installation process

  Original title: I'm not able to install Age of Empires II.  It is not complete the process of setting up and gives me the product identification number. What should I do next?  I had installed and working before you leave on a trip and you returned to find that the files were corrupt. So, I uninstalled and tried to reinstall, but it won't.

  Hello

  1. you receive an error message or error code when the installation crashes?

  2. where exactly you are trying to install the game?

  3. what operating system is installed on the computer?

  Check if an error message or error code is listed in the event viewer. You can check the link below:

  Open the event viewer: http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  Reference: Appears when you install Microsoft Games and mapping programs.
  http://support.Microsoft.com/kb/258496

• Windows could not complete Installation

  I'm going, "Windows could not complete Installation, restart computer installation to install windows on this computer starts services.

  
  
  I tried to start in safe mode with network, again get an error
  
  
  I tried to load the default settings in the BIOS, still get the same error message
  
  
  I have an Acer Aspire laptop, I had no win7 Home Premium OS disc.
  
  
  Is there a way I can fix this, without going through an OS disc?
  
  
  Thanks in advance.

  Hi Marc,

  By Acer of documentation about their eRecovery using:

  These steps will return the system to the factory installation of original factory, including all applications and drivers installed.
  Back up all data before using this procedure.

  You can see the article here.

  I suggest to go thanks to support from Acer directly to see what other options they can give you, because you don't have a disc of Windows 7 from them to other possible measures as a tool to restart system etc.

  http://support.Acer.com/us/en/default.aspx

  Thank you!

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I delete

  I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I remove the program

  Use of the Adobe Creative Cloud cleaning tool to solve installation problems can help

• X 201 tablet will not lock, restart, sleep, closing or display UAC/consent UI after plugging in USB

  I have a X 201 Tablet (3113-W4M) comes preloaded with Windows XP SP3.  I amazed image XP and reloaded with Windows 7 Enterprise and got all the drivers for Windows 7 from the Lenovo Web site.

  The problem is that when the system resumes from standby or hibernation * and * I plug in a USB mouse or a USB keyboard/mouse combo, I manage not to lock, shutdown, restart or Hibernate the system.  In addition, something that called UAC is unable to display.  If I look at the process in the Task Manager, I see where consent.exe is running (called when a guest of UAC approval needs to be displayed).  Sometimes it runs several times corresponding to several events that should have displayed the prompt (e.g. running RegEdit).  Disable UAC is a workaround for this problem but does not address the root cause, and does not address the issue of the stop/lock/etc.

  After that extended troubleshooting which included 2 full OS reboot, trace log and deep customer processes, I reduced my question to the following steps:

  (1) boot with no USB Tablet mouse and/or keyboard attached

  (2) attach USB mouse and/or keyboard

  > Tries to lock the workstation and run Regedit, both work as expected.

  (3) Hibernate tablet (USB mouse and/or keyboard are connected)

  (4) out of the hibernation (USB mouse and/or keyboard are connected)

  > Try to lock the workstation and run Regedit, these two don't

  I discovered what I spend my working system (Logitech S510 keyboard/mouse combo) at home (Logitech LX 310 mouse).  I have all the updates of course Windows 7 and I installed the latest Logitech Setpoint.  The problem has occurred before and after the installation of the setpoint software.

  Curiously, I can reboot the system via command line using 'shutdown - r' but it takes 4 to 5 minutes as opposed to the less than a minute when it does occur.

  Thanks in advance to the community.

  Joel

  Try the fix for Microsoft suggested in this thread, so far it works for me:

  http://Forum.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X200-Tablet-Win7-black-screen-freeze-on-...

• Could not complete your request because the program error when trying to set the text on a path

  I'm putting the text on a curve and when I click with the text tool on the way I get this error message "can not complete you request because of a program error."  Photoshop CC 2014 on Win 7 with 32 GB RAM machine.  Never had this problem before!

  Hi njquinn,

  'Could not initialize Photoshop because of a program error' is a generic error and means something unexpected.

  See the PSErrorLog.txt file in your folder of Photoshop CS5 preferences (C:\Users\> \AppData\Roaming\Adobe\Adobe Photoshop 2014\Adobe Photoshop CC 2014 Settings CC). Which could give us an idea what goes wrong. In case you are not able to understand it, please copy and paste here.

  Also, allows to optimize PS for optimal performance and then check out. http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html#main_Set_P erformance_preferences ; Photoshop CC and CC 2014 GPU FAQ

  See you soon!

  ~ David

• Problem printing - "operation not completed; "print spooler service does not.

  My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.

  Hello

  According to the description in this document from the Microsoft Knowledge base:
  http://support.Microsoft.com/?kbid=314876

  Please try this:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field.

  Maybe it helps you solve this problem.