Edge of Windows 8 e520 WiFi grey

Similar Questions

• Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet.

  Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet.

  Have been able to fix it by uninstalling the driver wireless and re - install, but when the system is restarted it then returns to the same problem.  Tried to remove the data of the registry key 'TrayNotify' windows and stopping the same tried to remove "explorer.exe" and replace "explorer.exe".. even goes back to the same problem.

  It is likely that your computer sees and is seen by your router.  Gold Star means that it is connected, but the router will not assign an IP address to access the Internet.

  This is usually caused by a code password incorrectly stored (on your computer).

  Click on this icon.  Find your network.  Remove it from the list.  Now, after a small wait, click this icon again.  It should detect your network and ask for the password.  If you have entered the right code, it should connect you.

  If these steps do not resolve the problem, then it is likely that you would have a problem with your router - it might be inside a separate device or your modem.

  A restart of the modem and router can help.  Pull the plug on the modem and the router.  Wait 30 seconds.  Put the plug in the modem only.  Wait 30 seconds.  Put the plug in the router.  Wait 2 minutes.  If she can still connect, try re-booting the computer.

• Cannot DRC windows 2012 via wifi

  Hello

  I have problems connecting DRC to windows 2012 via wifi.

  My windows 2012 is set up in my network using cable and hub, while my laptop is also on the network connected via wifi. DNS and internet work fine, but every time I tried to connect to windows in 2012 using wireless (DRC or domain join) do not work.

  I tried to use cables and it works beautifully... seems that windows 2012 do not accept the connection of clients connected wireless...

  Help...

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How can I get rid of the black edge on windows 7

  Original title: Black border on Windows 7

  Hello, does anyone know how I can get rid of the black edge on windows 7 I already try to change the resolution anything happen how can I solve this problem

  Hi Burton,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are facing the issue with your monitor and get a black border around the screen. Even after changing the resolution problem persists.

  I suggest you try the steps provide below and see if it helps.

  Method 1:

  Check the link and try to run the Troubleshooter:

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I suggest you to update the display drivers and see if it helps.

  Steps to update the drivers for the display (graphics card).

  1. Click on start.
  2. In the option of Search type please run.
  3. In the run window, type devmgmt.msc.
  4. Then in Device Manager right click on graphics card.
  5. Expand the display adapter.
  6. Try to update the drivers of the option that automatically update the drivers.
  7. If it works fine, if not try to check for drivers using the model number of Display Adapter.

  For more information you can check the link below:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Connection of the user before Windows 8 PRO WiFi connection

  Windows 8 Pro, WiFi doesn't connect before a user connects.  I manage all the remote PC and restart them remotely via remote desktop.  In Windows 7, we had only to ensure that the availability of the wireless profile has been created for all USERS.  In Windows 8 PRO, even if I have my profile wireless for all users it does not.  If I try to connect with Remote Desktop, and a user is not already connected, the wireless connection is turned off.  If I connect remotely to a user, the WiFi off as well.  It is a major issue.  Is there a difficulty, a configuration change to enable the WiFi for the value IT if no user is logged on?  I'm about to go back to Windows 7 PRO.  Windows 8 is great, but I'm so again, I don't want to think about.

  Any help is greatly appreciated.

  Thank you, KG

  Thanks PBWS.  In fact, I solved the problem.  The problem was caused by the WiFi I was using either WPA2 Enterprise encryption.  As soon as I changed my personal WPA2 worked well all.    Under Windows 7 PRO, it wasn't a problem.

  Thanks in any case.

• Windows 8 'off' Wifi problem

  Hello

  I have a Hp Dv7 7003tx PC laptop and updated level to win 8 yesterday.
  I have all the drivers installed, including my wifi, Centrino n2230 wireless driver.

  even with the wifi on my wifi button, windows appears off the coast of :(

  Help, please

  Hello

  Thanks for posting in the Forum the Microsoft community.

  From your description, I understand that you have a problem with the Windows 8 wifi button, when you turn it on IT will automatically to disable (OFF).

  Follow the mentioned methods:

  Method 1:

  Open the network troubleshooter utility by sliding in the edge right of the screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the resolution of network problems in the search box, by typing or clicking on settings then tapping or clicking on identification and repair of network problems.

  Method 2:

  Make sure that wireless connections are enabled:

  1. on the home screen, type Control Panel, click on the filter of Apps and then tap or click Control Panel.

  2. in the left pane, tap or click Wireless.

  3. in the right pane, verify that airplane mode is off and that the wireless devices are on.

  Then check the current connections:

  1. open the charm of settings by hitting swipe from right or by pointing the mouse on the bottom right of the screen.

  2. press or click the network icon, indicated by either a screen with a cable network (for wired connection) or a set of five bars supported (for wireless connection).

  3. in the list of wireless networks, choose your network and enter the credentials necessary to connect to the network.

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Computer portable NB305 - Windows 8 pro - WIFI not working not

  Hello everyone,

  I have a Toshiba NB305-105 netbook with windows 7 and 2 GB Ram... I bought windows 8 pro update and I installed it.

  After the proper installation, I installed all the drivers toshiba Win 7 32 bit.
  Well, after that, no hardware problem, but the (Fn + F8) wifi button is not working and I can not turn on wifi... !!
  If anyone knows how to solve this problem... Please...

  PS: I installed the value pack (vap...) but nothing...

  Help me...!!
  Thank you

  > but wifi (Fn + F8) button does not work and I can't turn on the wifi... !!
  > If anyone knows how to solve this problem... Please...

  To activate the WLan under Win 8, you n t need to use the Fn keys
  You can directly activate the WLan in Win 8 parameters.

  Place the mouse on the top right
  Charm bar would slip on. Choose the settings here
  Now in the charming bar choose change PC settings
  In the PC settings select Wireless.
  Now in the wireless area, drag the slider of WiFi on / off to on position.

• HP ProBook 4530 s: HP ProBook 4530 s 10 Windows upgrade without WiFi (Atheros AR 9285)

  Last day to update... so time to go. But after launch update process I get an error message on the WiFi card not supported. Can I remove the WiFi card, install Win 10 and maybe later buy card WiFi support for this model?

  Hello:

  You should be able to... Just make sure that connect you cable ethernet so W10 is activated before the deadline.

  I recommend that you get the Intel Centrino® Advanced-N 6230 wireless network card... HP 636672-001 part number, in Chapter 3, page 25 of the maintenance manual.  It is the only card I see on the list that should work on W10.

  NOTE: You MUST get this specific map and it MUST have the part number HP on it or it won't work.

  Usually, I'll question asked by HP part number on eBay, and buy a card which shows the part number in the photograph of eBay listing.

  But an easier thing to do would be to make the W10, installation DVD using the tool of creation of media on the link below, run the upgrade from the windows desktop, select do not automatically check updates and W10 ignores any material control install card atheros in place.

  https://www.Microsoft.com/en-us/software-download/Windows10

  I doubt that the atheros card works after W10 is installed, but you shouldn't remove it just to install W10.

  There is a W10 driver for this card but I find the hardware version of the card that your laptop is too old to work with the driver.

  This package contains the installation package driver for the controller wireless LAN Qualcomm Atheros AR9000-series in the supported models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71858.exe

  OPERATING SYSTEM (S):
  Microsoft Windows 10 32
  Microsoft Windows 10 64

  SUPPORTED DEVICES:
  Qualcomm, Atheros AR9285 802.11b/g/n WiFi adapt
  Qualcomm AR9380 802.11a/g/n WiFi Atheros adapt
  Qualcomm-Atheros 802.11a/b/g/n WiFi adapter AR9462
  Qualcomm-Atheros 802.11b/g/n WiFi AR9485 adapt
  Qualcomm-Atheros 802.11b/g/n WiFi AR9565 adapt
  Qualcomm-Atheros 802.11b/g/n WiFi QCA9565 adapt

• Satellite L40 - F14 with Windows XP - seeing WiFi is disabled

  Hello!

  I have satellite L40 - F14 with Windows XP Home SP2 - and everything works fine.
  But there is a little problem with indicator LED WiFi - WiFi works normally.
  connection with router and... This LED turns OFF. It is not big problem,
  but I like, if everything works well :)

  Now I have the latest version of the driver installed (from 29.11.2007)---> http://support.toshiba-tro.de/tedd-files2/0/drvpack-en-20071119132412.zip.

  Can you give me link to correct functioning driver WiFi for Satellite L40 - F14 or answer where is the problem?

  Help me please :)

  st_man

  *_@st_man1_*
  Have you checked if the WLan switch on the side of the laptop is on? This switch activates and deactivates the WLan led. If this is not enough, I guess that there is a hardware problem. Perhaps some loose contacts, for example.
  This can be corrected with any software update, I think that the technician should take a look in the notebook and should check this

  _*@chris4o*_
  First of all it s very strange that your laptop has not delivered with any Windows operating system! Each new Toshiba notebook was shipped with the Windows operating system and the image of Toshiba should be already preinstalled.
  In addition, you should find the Toshiba Recovery CD in the package. This CD contains all the drivers Toshiba, tools, Windows OS and additional software!

  With regard to the pixel dead;
  Usually the internal laptop display can be replaced if a large amount of dead pixels would be displayed on the screen. There is an exactly information about replacing the screen.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  In any case, I recommend you really clarify this two issues from your laptop dealer! The laptop must have the OS!

• HP Pavilion g153us 17: HP Pavilion 17-g153us Downgrade from Windows 7. WiFi card problems

  Customer brought this new unit with 10 Windows preinstalled and I wanted to downgrade and even if its always a worry, I managed to get them to always easy downgrade but the card wifi on it gives me a hard time.

  Card details

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  I tried a few downloads and that they be crazh with an error or compelete and nothing happens or installs but gives an error and the driver is never able to be used.

  Please give me some ideas on the right side of the road for this camera please.

  From what I've read, it's a Broadcom BCM43142? Is this correct?

  Thank you guys!

  Hello:

  See this post below... I think getting in the same back and forth with this member with exactly the same results.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/unable-to-find-a-Windows-7-x64-driver-for-Broadcom-BCM43142/m-p/5506377/highlight/true#M112566

  He scored the pilot that I posted the solution to see if it works... (sp70888).

• Windows 7 Y410p wifi problem

  Hi guys...

  I need help for my Y410p... he does ' t connect to WIFI...

  I do not know.. If he has a relationship with the energy management software?

  I really need help...

  Hi babega,

  OK, so, from what you have posted here seems that windows does not detect the drivers correctly. could you try to download the drivers below and check for changes.

  Network: Wireless LAN

• Y50: Clean Windows 7 install, WiFi problem

  Hi all

  Recently, I installed an SSD. I installed windows 7 Ultimate today, no problem. Was very easy. I installed all the readers on my USB Lenovo website. Everything seems good but the WiFi will not detect. I restarted my laptop after installing the drivers, still no good. I'm trying to brain any solutions I can think of the storm. When I get home from work, I intend to download readers updated to intel. I also looked in the forums, but nothing for Y50.

  Any suggestions?
  Thanks to you all

  MCoulter48 wrote:
  Hi all

  Recently, I installed an SSD. I installed windows 7 Ultimate today, no problem. Was very easy. I installed all the readers on my USB Lenovo website. Everything seems good but the WiFi will not detect. I restarted my laptop after installing the drivers, still no good. I'm trying to brain any solutions I can think of the storm. When I get home from work, I intend to download readers updated to intel. I also looked in the forums, but nothing for Y50.

  Any suggestions?
  Thanks to you all

  Determine the first if you the Intel or Broadcom or other wifi card. Examine device manager if there is marked yellow icons.

• HP laptop - 15-ay013nr: after you have not installed Windows 7 no wifi

  Hello

  After I installed Windows 7 (I can't bear Windows 10) I han get wifi to work. I downloaded driver lasted for windows 10, but Im not even get to be shoq wireless hardware. Help, please. Cable internet connection works fine

  Hello:

  You need this card driver for the Intel Dual Band Wireless-AC 3165 802.11 wireless 1 x 1 WiFi adapter has your laptop.

  The 2nd driver down on the left side of the page is 64-bit.

  https://Downloadcenter.Intel.com/download/25835/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

• Pavilion 15-p264na: edge of windows displays security certificate warning

  updated my Windows laptop, 10, but whenever I'm on the edge browser, I get "Theres a problem with this Web site security certificate ', I read these forums tips and checked the date and time which was OK, so I do not understand why I am unable to use Edge, I currently using Firefox which has been loaded when the 8.1 Windows so I would be stuffed if I couldn't use, there must be a simple answer to this something Im missing

  Hi @mayflowersteps,

  Thanks for the reply.

  You can consider to return to the previous Windows upgrade was less than 28 days.

  HP Notebook PC - upgrade to Windows 10

  The last part of the link gives information on return to previous Windows.

  You can also try with different browsers. You can download the Google Chrome browser to see if it works for you.

  Best of all,

• the window of my wifi has a red cross on it, but it is running

  I just upgraded my pc & a red x's over wifi window in the taskbar

  Hello Carldunn,

  Thanks for your post. What operating system do you use?

  In the meantime, try the following steps:

  Click 'Start' > right click on 'Computer' > select 'manage '.

  Select Device Manager"in the upper left corner.

  Expand "network adapters."

  Underneath, you should see your network cards.

  Right-click your wireless adapter and ensure that it is enabled.

  Please let us know if it did or did not help to solve your problem.

  See you soon