Een bladwijzer will logo

Similar Questions

• Programma meeste s reageren niet voortdurend

  portable meeste of programma op mijn me programma laten meervoudig principled dat dat created reageert niet.

  Verder ook clean met Windows Media Player 11: codecs nodig voor het listen van music, waarschijnlijk missen, want ik kan geen muziekstukken of horen.
  
  
  Dank voor liquids made concrete.
  
  
  Gijs Peperstraete

  Hi Gijs,

  We speak only English here, but soon there will be a Forum for answers for the support of programs and music, as well as its support, including Media Player in Dutch at: http://answers.microsoft.com/da-dk where you can get assistance from an expert in your language, but it is not yet available. However, in the meantime, you have two choices:

  1. go on: http://support.microsoft.com/common/international.aspx and select the location of the generic support in Dutch.

  2. Add Bing Translator if you use IE: http://www.ieaddons.com/en/addons/detail.aspx?id=205 and as I have done here to translate your question and provide a translated version of my answer, you can do the same (it build in Bing Translator in your language and then translate to English and copy the English version and the post office which) (, in the English forum and when you get a response, use Bing to translate it so) in the right forum for program problem here: http://answers.microsoft.com/en-us/windows/forum/windows_programs?tab=all and here for the problem of Media Player: http://answers.microsoft.com/en-us/windows/forum/sound?tab=all but at the top don't forget the identifier of the version of Windows that you use the drop-down list to change all the versions that you are using so you will get the best possible support.

  Good luck and best wishes.

  ************************************************************

  Hallo Gijs,

  Said forum is voor MSE kwesties. UW clean lijkt you betrekken programming problems in Media Player oplossen.

  Wij spreken alleen yesterday Engels, maar er zal sooooonnnnnnn Forum find voor een programma steun in music en geluidsondersteuning puts inbegrip van Media Player in het Nederlands op: http://answers.microsoft.com/da-dk good u deskundige close in uw taal, het maar waar is available of nog niet. Echter, in of tussentijd heb I twee now:

  1 Ga naar: http://support.microsoft.com/common/international.aspx en locatie voor steun generieke right select in Dutch.

  2 Add Bing vertaler als IE used: http://www.ieaddons.com/en/addons/detail.aspx?id=205 en als ik Act yesterday om you vertalen your question in Ben een vertaalde versie van mijn reactie, good u doen zo goed (construeren in Bing vertaler in uw taal en then vertalen naar het Engels en kopieer myself versie die post en in het Engels forum when u een antwoord will get Bing bloodstains om en you vertalen dat zo goed) in het right Forum yesterday voor het programma clean: clean http://answers.microsoft.com/en-us/windows/forum/windows_programs?tab=all en het van yesterday voor Media Player: http://answers.microsoft.com/en-us/windows/forum/sound?tab=all maar op zorg albums maaltijd dat in Windows versie-id dropdown doos used u die you veranderen van alle versies naar een u used due beste support mogelijk will get u.

  Good luck in beste wensen.

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• The Messenger app will be not updated. Stuck on "Waiting."... "and the logo in grey. How can I fix this or return to the previous edition that worked?

  I received a prompt on my Ipod touch 5th generation yesterday, that there is a new update of the Messenger application. So I tried to update, however, the app is now stuck on the phase "Waiting."... "and the logo has been disabled. I still get notifications of new messages from the app, but I can't open. I tried to remove and then reinstall the application but the application did not and the app store think that I always opened it. How can I fix this or return to the previous edition that worked?

  Thank you in advance!

  Hello cfossum,

  Looks like you have problems with a third party on your iPod touch app, since the Messages belongs to iOS and you would receive separate not quickly update.

  The resources below will provide some troubleshooting steps for the problem you are having with the Messenger application.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• My iPod 5th generation does not start (it will stay on the apple logo) and will not be detected by iTunes.

  Last night I tried to turn on my iPod that has not been loaded. I plugged it so that it can start loading. I think the iPod as was the accused, has no need for me to start and should have done by itself. When I pressed the button home to start using it, I noticed it was not on. Then I pressed the power button and then saw he was showing the Apple logo and then it turns off again. I tried pressing the "home" button and the Start button / stop at the same time and the same thing will happen. I also tried connecting to my computer and it did not recognize.

  Try the remaining actines of the:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• C satellite will not start - only toshiba logo appears

  My laptop is only 1 week and will not start.
  All I get is the toshiba logo and the screen becomes a pale bluish color.

  Any ideas?

  What is your laptop model?

  You are able to access the BIOS?
  Turn on the unit button and press F2 to enter the BIOS.
  The BIOS screen is visible?

  Another idea: the laptop turns on, press the F12 key.
  Usually, you should see a start menu. Here choose the last option called HARD drive recovery.
  This option allows you to recover the computer laptop back to factory settings.

• Logo cracked apple and damage to housing, it will prevent the Mac work

  the logo of apple on my Mac mini was brutally assaulted by my three year old. Leaving the logo on the top of the box completely cracked. The Mac has been absent at the time. My question is, will it still work? I have not tried to start it upward, wasn't sure if I should. I am careful enough that I work from home and obviously the Mac contains all my work files (although I have backup, time capsule) I still would rather not have to invest in a new Mac and if the hard drive can be saved, it would be ideal.

  im hoping that the Apple is simply casing and the material below is protected.

  

  the mac itself is not based on the structural integrity of the envelope itself, even though the case has been removed the CCP wired to the hd and PSU should still work correctly

  But if the impact caused the case to yield, also due internal bed or bleeding of the pcb or copper tracks broken bit it wouldn't work

  and if the housing on the inside of the elbows to something low and short circuit, if it was me I give it a try, would be expensive to fix and it turn out to be a problem cosmetic only, as the repair people still requires a payment for their hours

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• Pavilion Touchsmart H-100: will I get my HP Windows 8 back to normal startup logo?

  As I went down to 8.1 Windows 7, when I switch to Windows 10, I'll be able to grab the trunk of style HP Windows 8 completely to the way it was before decommissioning?

  @JTaylor1

  Windows 10 upgrades using information based on your current installation. If you downgraded by using a set of stand-alone installation of Windows 7, there was no brand HP, the upgrade will not have this brand and logo no more.

• Will not get my Acer iconia 7 b1-730hd past Acer logo when I try to start. Any help, it was beautiful!

  I was reading on my Tablet and started to get flashes of Google has stopped playing and different applications, then they say something about the pitcher and he quit. When I tried to revisit the logo Acer turns on and it will not go to the lock screen. I even let it go until the battery is dead and the tried and the same thing! Help! Please, I beg you! Thank you

  Try the solution:

  https://community.Acer.com/T5/Android-tablets/need-help-Acer-B1-730HD-stuck-on-USB-logo/m-p/318495

• B1-850 Iconia, a 8 flashes acer logo screen then off continually. Will not power off / reset

  Iconia a b1-850 8 my son continues to blink from the acer logo screen then off continually. Attempted to maintain the power button / stop to + 30 secs and also tried hard reset, but nothing works. Do not cut keeps blinking in and out. Can someone advise? Thank you

  its ok no worries, you will have to wait until the battery is discharged, after having discharged, recharge it then it will normally be in good state...

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• Vista will not start - stuck on the progress bar with MS logo

  Yesterday afternoon, my HP desktop PC would not initialize. The progress bar would be continually scroll down with MS logo, and it will never change. I tried unplugging all USB ports and running system recovery. This morning, the PC said something to the tune of «this machine could not be restored...» If you have recently made a hardware change try to return to your old configuration. If problems persist, please contact your administrator. »

  We had the machine for about 18 months with no problems at all. It is equipped with AMD processors and is running 32-bit Vista Home Premium. I currently have anti-virus protection of software and spyware. I don't think that the office came with a recovery CD. There is a restore disc but I don't know if that was consulted. I tried to boot normally and repair the command prompt startup files with no luck.

  I hope that we bought the extended warranty from Staples, but meanwhile information or suggestions would be greatly appreciated.

  Thank you

  lucasmartin,

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Try the loads up in safe MODE , there may be some drivers that are corrupt or using last known good Configuration.

  For more information http://windowshelp.microsoft.com/Windows/en-US/Help/f9c50a72-04ec-4088-9fd4-a4f979eef5a71033.mspx#EAF

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.