EliteBook 8530w

Similar Questions

• EliteBook 8530w becomes extremely hot!

  I have an Elitebook 8530w for a few years now and for a few weeks, it's extremely hot, without the laptop even do anything just to be inactive in windows.

  I can bear high enough levels of heat with my hands, but the temperature of the air coming out of the exhaust on the left is so hot that I can't hold my hand in front of her. Today I need to download a software for my new office, so I used one of the USB slots on the left (near the exhaust), as the other 2 were occupied. After like 20 minutes, I removed my USB flash drive and almost immediately, drop it on my table, because the drive was too hot to handle.
  
  This is not normal, that last week I lift the rear of the cell upward in the air a bit for the fan sucks air much more easily, but it doesn't seem to work at all.
  Is this normal or is something wrong?

  Welcome to liquid.

  IM installing a new OS on a 8530w.

  After you have everything installed Vista I could barely touch the laptop.

  It was so hot.

  But on mine, there was little or no air flow coming out to the left upper exhaust.

  So I removed the keyboard. "" Two screws on the bottom and the four pieces of restraint between esc - f1, f4 - f5 and f8 - f9-f12-scrolling.

  In the upper left corner, remove the connector of the fan.

  Remove the 3 couple for the fan.

  Remove the fan and clean between the fan and the radiator fins.

  Replace in reverse.

  Let me know if you need more information.

• EliteBook 8530w: cannot restore factory my 8530w

  Hello, I have an Elitebook 8530w. I'm in the process of factory reset it to a new user. I have encountered some problems try cela and would like to help. I would finally get windows 10 offered to, but the system struggled to settle after downloading, im guessing it was because of the upgrade to windows 7 and some files missing now for the current operating system.  It's what I know and have tried so far:

  native system with windows vista, but currently runs windows 7 Professional

  system installation disc came with the elitebook

  It seems through the upgrade 'recovery manager' and recovery partition drives have all been removed.

  HP said there is no "install windows vista disk" that they can send to factory reset.

  I tried the system of operating system recovery and there is no recovery Manager, only system restore. The system restore option allows me to restore up to a point, that are in the last few weeks, no option to factory settings. the other option, it gives me is to restore the system to the default settings, but requires a system installation disk. My professional XP disk does not appear to be an acceptable installation disc. no luck using the operating system to restore the factory settings.

  F11 at startup does nothing

  depressing repeated F10 when you start to take me to the BIOS menu, you can also get to this menu by pressing the ESC key at startup and then pressing F10 for bios menu.

  Legacy USB support is enabled in the BIOS

  and the CD-ROM drive is in the boot priority options, however his 4th on the list, I doubt that moving in priority would fix the issue, but I'm not sure.  ID be more than happy to answer any other question that would help me to overcome this problem. Mainly due to the update for win 7 pro, HP cant help seems because of the upgrade to win 7 Pro.

  I called HP and followed several manuals on how to restore the settings to factory with no progress

  Any help would be appreciated, thanks a lot from the start!

  With a model of laptop as far from the current generation than yours, it resets the factory default without the recovery partition or the set of recovery disks won't be possible.

  HP EliteBook were shipped with a HP Recovery Media Creator who allowed the owner to create a copy of the recovery media.

  F11 won't work without a recovery partition which has not been amended.

  You can buy a recovery disk of the HP partner according to the value.

  http://www.computersurgeons.com/m-11-HP-elite-book.aspx

• EliteBook 8530w pci simple communication controller

  I have an Elitebook 8530w that I upgraded from Vista to Windows 7 64 - bit SP1 Professional. Everything works fine apart from the reported errors we find no driver for Serial Port of the PC and the controller PCI of communication Simple. I applied all the drivers updated etc that I can find to the 8530w but no joy. Can you point me to a download location for the correct drivers?

  Thank you

  TR

  Hello:

  First install the chipset driver and restart, if you have not already done. First download listed is the one you want.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType=.

  Go to Device Manager and click on both of your unknown devices.  Then click on the Details tab.

  In the properties of the drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Those who will be ID devices and I can send you the link to the drivers you need.

  I'm sure that this driver will take care of the simple PCI. So, you will only post the a missing aircraft.  This can take care of both of them. I just don't remember.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3781677&prodNameId=3781682&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-77385-1

  I have the 6930p which is a smaller version of your model.

  Paul

• HP Elitebook 8530w - change the graphics card

  Hello... I have a technical question. HP Elitebook 8530w, I had and I would change my graphics quadro fx 770 m of quadro FX 2700 m. Is this possible? I think that both cards have the same slot...

  Hello

  Please see the following links:

  http://www.nvidia.com/object/product_quadro_fx_770_m_us.html

  http://www.nvidia.com/object/product_quadro_fx_2700_m_us.html

  Just for the only heat pumps of 2700 m to 65w and pumps only 770 m to 35w. You can see where is the problem. You need new power supply, you must again cooling system...

  HP workstation class machines are those that we can replace the GPU, but you must consider the heat.

  I hope this helps.

• How can get the keys to windows vista for my computer laptop elitebook 8530w c

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  ===================================================
  For OEM support software... Check with your computer manufacturer.

• Elitebook 8530w lost BIOS password

  I have lost / forgotten my bios password and tried all possible combinations without result. Is there any method of recovery or reset the password?

  Before that I lost my password I was using fingerprint authentication, but this was replaced after reinstalling windows7.

  My model is the Elitebook 8530w

  Did you install the AuthenTec fingerprint driver and your software security tools protect?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3999719&lang=en&cc=us&prodTypeId=321957&prodSeriesId=3781677&TaskID=135

  If none of those solve it, you can use the Active Chat on the page feature to get the support of a HP technician.

• HP elitebook 8530w mobile work: Memory module error capslock and numlock blinking 3 times

  I start my Hp machine, nothing showed on the screen and the "capslock and numlock blink 3 times.

  I tried hard reseting it / power adapter and the battery does not appear to be the reason for this problem.

  It is a mistake of memory? How to fix?

  RAM reinstall, didn't work. has one of them. who was the culprit.

  BTW, it takes like millon years and much bullshit unnecessary jargon at the chance to see your own * beep * post. HP SUCKS

• HP Elitebook 8530w: laptop suddenly stops after 30-40 minutes.

  Hello!

  I was using my laptop and it stops all of a sudden so I turn back once again, but after 30-40 minutes it closed down, I tried to remove the dust of its winds, reinstalling windows, but still have problem.

  Please help me HP Experts.

  Thank you.

  Stops on the power mains or battery only? Can enter you the BIOS (F10 as you turn) or UEFI diagnostices (F2) and run a scan on the hard drive or any material if you can find this menu?

• EliteBook 8530w Workstat Mobile: resetting the BIOS password

  Hi, I got this laptop from the previous owner who is not able to provide me with the BIOS password. What are the options for resetting the BIOS for this model?

  Thanks in advance!

  @delay4

  I used this program to hundreds of times.

  If you need help just let me know.

  REO

• Question of AuthenTec fingerprint

  I have a refurbished Hp EliteBook 8530w with Windows 7 Professional.

  I did a reboot with the CD that came with the computer, everything was fine, except that it didn't reinstall about 5 of my records. One of the discs was the fingerprint sensor. Well I reinstalled the drive but can't seem to find out how to install the software real/activate the reader through my control panel so that I can connect with my fingerprint. It worked until I rebooted with CD.

  Help, please!

  Hello AsherLove,

  Welcome to the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Thank you and have a great day!

  Mario

• Intermitant selective wireless Internet

  Recently, I bought a Hp Elitebook 8530w.

  The problem is sometimes the wireless internet does not work properly.

  Generally, the computer says that it is connected, and yet when I try to use a Web browser, it remains indefinitely on a white page with "waiting for [Web site name] to answer." When I go to play a game that requires the internet service, it is impossible to connect. But then, when I use an instant messanging system to communicate with a friend, the internet works.

  Immediately I guess that's my anti-virus doing soemthing tweaked since I was in a remote way, connected to the internet. After audit, it, adding "exception" and then finally just discontinue the entire service and see if that solved the problem, he still produced no results.

  It has become a problem of frerquent, and it seems that some immediate fixes are by restarting the computer and then disconnect recconnecting with the wireless network. But alas, the problem appears sometimes as beauty as every few minutes, and sometimes repair the connection works, leading to a complete loss of connectivity.

  So when I Googled, I didn't a lot about my problem (although I found some people have problems reconnecting to the internet after the release of the standby mode) other than the basic tips of: restart your computer. Make sure your router is working, more low-traffic internet, reinstall driver. And Yes after restrting my computer, making sure my router works (my other laptop worked fine) and reinstall the driver, the problem still persisted. The driver that I reinstalled has Intel(r) WiFi Link 5300 AGN

  Basic information:

  System:

  Microsoft Windows XP

  Professional

  Version 2002

  Service Pack 2

  P.S. as expected, the 1st time I try this post, my internet connection failed, despite the fact mislead I was instant messanging a friend. When you try to repair the connection, the process has failed to "Renew ip address" manually disconnect, then reconnect works however.

  Any help is greatly appreciated. I tried to include as much information as possible. I hope not too much of it was silly,.

  First uninstall your old drivers for Intel wireless.

  How information here.

  Letest driver for Intel wireless here

  Message edited by Daniel_Potyrala on 07/31/2009 04:04

• 3rd party msi installers fail to install on windows 7

  I am unable to install any software that uses an .msi extension. For example, Endnote X 3 fails to install with Error 1935 in Microsoft.VC90.CRT. This happens also with Python 2.6.1. All these errors occur at the stage of 'publication '. In addition, some updates do not settle - like XML SP2. My installed updates screen is also blank. I'm running Win 7 Ultimate on a HP elitebook 8530w with a dual boot Win XP.

  Help, please

  Thank you

  See my answers to your other thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ef286abf-6954-4740-901b-23107070903e/

  Ideally, you'd have only 1 a current thread on the computer in question. A moderator can choose to merge the two threads.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Use high CPU by AtService.exe

  Aloha, I have a Mobile HP EliteBook 8530w workstation. I had very slow startup problems. I have improved a certain drivers by Driver Detective program recommendations. Starting time is great now. However, I now have this file AtService.exe constantly using 50% of my CPU makes lazy from time to time my computer. Apparently, it's something to do with figerprint sensor that I do not yet. I found the file but am denied access when I try to remove it. I wonder if I can get rid of the entire record of fingerprint sensor without causing problems? Help, please! Thank you

  reefguy

  Your problem is caused by the Authentec software that is loaded by the fingerprint sensor.

  Try to download and update HP ProtectTools Security Manager Suite of here.

• Windows XP Professional drivers missing / error installation

  * Original title: windows XP Professional dirvers

  I just clean installed XP on my Elitebook 8530w windows after I got it running to swap HDD.

  now I'm back to the point where I need to reinstall the drivers again, but are not the same as those previously working to work more.

  If I can get the Ethernet controller or the wireless controller works, I'm sure I can get is still automatically update

  but I tried several drivers for both now and seem to be no case.

  Under "network adapters" in the Device Manager, I have a yellow! Next to:

  Intel(r) WiFi Link 5300 AGN

  any thoughts?

  UPDATE:

  SVC 2 & 3 Pack seems to have corrected the problem of wireless network card driver. It will not display the networks in the area, however.

  2ND UPDATE:

  There was a wireless "sensor button" at the top of the laptop, it was orange, when I hit, it became blue indicating the wireless is now enabled. This fixed the problem of the internet... now to see if I can get the rest of the drivers loaded to the top.