EMC Data Domain directly connected as a VTL

Similar Questions

• Integration of POS & EMC Data Domain

  Hello

  I would like to know when I am back on a Data Domain with 6 POS, what happens if I lose my VM VDP?

  I could create a new VDP, configure it to the same domain of data and access backups?

  Thanks in advance!

  Yes, backup/restore data points is accessible directly by a new POS device, but backup jobs and replication tasks will have to be re-created. I think that this issue is addressed in the POS administration guide. If not, research paper VDP Advanced Data Domain - it refers to advanced POS who rode in POS 6.x so the info is still applicable.

• Backup with vRanger connection using NFS to a Data Domain appliance...

  Did he this?  We are, but have random failures when it appears that the NFS mounting times.   When we go through a connection CIFS on the Data Domain appliance via the server this connection vRanger is installed, we have never failed, but our backup window has passed.

  It's our vSwitch config:

  vSwitch0 - 3 natachasery, vmnic10, vmnic4, vmnic0.  Active service Console Port (vlan id 11) to vmnic0, standby for vmnic4 |  vRangerbackup port vmnic0 standby, active adapter vmnic10, vmotion disabled, group (no ID vlan).  VMotion port group (vlan id 20, active adapter vmnic 4, vmnic0 auxiliary card.)

  Mounting NFS uses only the Group of vRanger connection ports so the primary vmnic10 is used which is an Intel Gigabit VT Quad Port Server Adapter.  The other natachasery is on different maps, being an other Intel 82571EB and the vmnic0 is a Broadcom NetXtreme II BCM5708 onboard.  I read that it is not recommended to use different providers on the same port group.

  One of the experts want to chime on this config?

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

  I would say that you have a problem NFS.  Try to push a huge file as NFS (no backup) and see what happens.

  It should be pretty easy.  I don't know how you have it setup, but I would set the NFS for vRanger connection VM directly and not try to push the backups for the NFS mount.

  So if your connection VM vRanger is called VCB, and your data store is mounted as NFS01, you must mount NFS01 on VCB via another NIC and do not use the ESX host and the mount rather mount the NFS inside the VM direct.

• Direct Connect with GPS or other active data

  I'm testing the possibility of using the functionality of direct connection to and from a phone while accessing other critical mission for my work tasks. We require the use of a tracking application that captures and sends GPS coordinates to a server via a data connection and also to connect to work through tasks via a web browser application. Direct connection cannot be launched on the phone while the user has any running application that uses data, it seems. It will work when the tracking application is closed and that the browser is slow and not loading pages, but doesn't if the browser will load a new page, the GPS application is running or even just Google maps. Can you get it someone please let me know if the i1 should be able to use Direct Connect when using other services that use data? I have been informed by Sprint that it is possible (two other applications can run on the data at the same time). The phone lacks a voice, only data plan.

  No, you can't. If something is using data on an iDEN connection, that's all. That's all it will do. It's just the nature of identity. If you want a phone that will have voice and data communications at the same time, you need to use CDMA or GSM.

• Admiral: Unable to remap button Direct Connect

  Hey there!

  I am unable to remap my Direct Connect button for an app or something like the calendar. When I go to the menu > settings > applications > Quick Launch, I have no option to remap the side button, all I see are shortcuts for the letters a - z. Am I the only one having this problem = D?

  If you have active with Sprint DC you won't be able to remap the DC button on the side, because you will need to use the option of DC.

  If you do not DC active with Sprint you 'll be able to remap the DC button on the side that you wouldn't be able to use it to DC and are able to remap it to something more useful.

  For the DC remapping button when the domain controller is not active on your Admiral goto: settings-> Applications-> quick launch.

  Thank you

  J

• BlackBerry Smartphones Groupwise address book sync with Nextel Direct connect # s for 8350i

  Is there a way to synchronize address books for groupwise and 8350i included nextel direct connect information?

  Thank you

  Mapping has resolved the problem. GroupWise has no corresponding to 'Direct Connect' field. To facilitate data entry, I traced the Direct Connect field in my 8350i with paginator field in my groupwise address books. Now Synchronization Manager BB the nextel direct connect #'s.

  The steps are:

  In the upper frame of the BB desktop, select Configuration synchronization; address book; Advanced; Field Mapping (bottom of list). Map an unused field in the address book of GW with the direct connect field in the 8350i.

  I assumethis would also work with outlook and others.

• C3160 Direct connect support?

  Hi, I have trouble finding anywhere that will give me a confirmed answer on this.

  I would like to know if a server with Vic 1227 C3160 supports direct connect mode in the fi.

  Thank you very much

  Hi Anthony,.

  If you refer to the data sheet below:

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/HW/C3160/in...

  "Currently, the Cisco UCS C3160 server runs in stand-alone mode only. Integration of Cisco's UCS is not supported. »

  This means that the C-series server cannot be connected to the interconnection of fabric. Here is a guide on the integration of the server of the C series:

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c-series_inte...

  "Cisco UCS Manager 2.2 supports an option to connect the CSeries Rack - Mount Server directly on the fabric of interconnections. You don't need fabric Extenders. This option allows to Cisco UCS Manager to manage servers mounted in series Rack C using a single cable for management traffic and data traffic. "

  Given that integration is not supported this feature will be unavailable.

  I hope this helps, please check the answers as well as others may find useful messages accurately.

  Qiese Sa'di

• MMR does not not on a direct connection VDI

  Hello

  According to the view release notes 6.0.2 ROR Horizon is supported on VADC (Agent direct connection), but so far I was not able to make it work. Strange thing is that when I connect to one of these workstations via the broker, ROR works. I use a VDI in Win 7 x 64 with the latest VMware Agents installed. Also, servers connection view and view composer have installed the latest versions and the client has the latest version of the Client view installed. There is no firewall rule that block traffic MMR no more, because for testing purposes, I've disabled the firewall on server side, client-side AND the VDI side. Anyone any idea what I am doing wrong?

  Thank you

  Chris

  Did you apply the group policy setting to enable it? Unlike the full connection agent, there is no UI admin to set this policy at the time of the connection, so it must be configured by GPOS. From view_agent_direct_connection.adm:

  Multimedia redirection (MMR) activated

  Determines if the MMR is enabled for client systems. ROR is a Microsoft's DirectShow filter that transfers multimedia codecs-specific data on view offices directly via a TCP socket to the client system. The data are then decoded directly on the client system, where it is played. The default value is disabled.

  MMR does not work correctly if the client system's video display hardware is not supported for recovery. Client systems may have insufficient resources to deal with a local multimedia decoding.

• How to get my site Muse have a "Direct connection" to an article on my site.

  How to get to my Muse site to have a "Direct connection" to an article on my site. For example, if I am under the busniesscatayst I can direct a party to a specific page in my site via an email or Facebook message: http://biteonfishing.businesscatalyst.com/buy-now.html However, I can not run the service when I'm not including the Business Catalyst www.BiteOnFishing.com Thank you I can send people to the link using www.BiteOnFishing.com/buy-now.html. All opinions are appreciated.

  You must point your DNS domain name to the server of Business Catalyst and then set up the domain name in the Business Catalyst site admin.

  Adding a domain name to your site and take the live site

• HP OfficeJet 200 series Mobile: 3 Surface Pro WIndows 10 - can't re eastablish wi - fi direct connection

  Hello

  We managed to connect our Surface Pro 3 Windows 10 running on a mobile printers HP OfficeJet 200 series using a Wi - Fi Direct connection not wireless. The problem is that whenever we turn the printer off or go to sleep Surface pro cannot re esatablish of connection with the printer again after on. In the device and printers OfficeJet 200 is still there but greyed out and has a status to be offline even if the printer has been for a while.

  The only way to connect it must make the entire process of reconnection to the Wi - Fi direct connection, for example by typing in the code and wait to see the device is connected. It should not this printer to establish a connection with the surface pro automatically after power on, yet the pro Surface shows that the printer is offline and I know that I had direct Wi - Fi together to establish the connection automatically. Is there a solution for this.

  The problem only occurs when the printer stops and he must turn it off to save battery because what get out us them for field work.

  We discovered that the Wi - Fi Direct is not fully supported in Windows 10. The only way you can reconnect to Wi - Fi direct is if you connect to the printer that you connect to an access point Wi - Fi. If you do this your Wi - Fi direct printer connection will be reset. The downside is that your Surface Pro 3 will lose the internet connection.

  For us, that our solution is not to use Wi - Fi direct and use the Wi - Fi function. We connected the mobile series HP OfficeJet 200 to our iPhone hot spot and we also connected the Surface Pro iPhone hotspot. Whenever we connect our tablet to the hotspot, we can use the printer because the printer is always connected to the HotSpot.

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Skype on iPhone 4S with 3G data uses 3G connection or a cell phone?

  When you use Skype on an iPad, the manual that we saw clearly that Skype is using the Wifi connection. We now have an iPhone 4S with 3G. Is a Skype call to a contact in the computer using 3G data network to connect, or is it using the cell phone?

  It uses the 3G network. Skype's VOiP (voice over internet protocol similar to FaceTime), so it does not use your cellular network. If you have a data plan unlimited, then go nuts. If this isn't the case, monitor your data usage to make sure you don't exceed, which should not be a problem, unless you still do video calls.

• H710 Bluetooth and Direct Connect?

  My H710 Bluetooth works with the direct connection on my Motorola i880 phone feature?

  It is correct. Audio in and out will work with any Bluetooth headset device and an iDEN device. However the PTT function must be done with the actual combined PTT during the use of these BT headsets. There's not a BT headset device I know for iDEN combined allowing PTT of the helmet apparatus itself.

  Captive headphones (corded) allow you to control PTT of the cord.

• Update Windows using the two direct connection to proxy nd

  Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?

  am on windows 7 Home premium

  Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?

  Asked me to do this update of proxy (windows security essentials)

  The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]

  2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.

  Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
                         OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080

  If his point is it normal that windows update as well as the WSE update fails with direct connection?

  happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"

  If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...

  I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network

  Please give me a good solution with this

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}