Encode down export to DVD, but not Blu - Ray

Similar Questions

• HDX 18 laptop: DVD drive plays but not Blu - ray discs. No idea why?

  Drive seems to work fine and it plays DVDs, but when I insert a Blu - Ray disc, Media Smart software opens and after a few seconds, a boc opens and asks me "do you want to check for updates?"  with a Yes and no button.  No button produced no results and the Blu - Ray does not play.  Any thoughts?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the installer for it on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53029.exe

  When the download is complete, open windows panneau Panel configuration, open programs and features, right click the entry for HP MediaSmart DVD and select uninstall - once this process is complete, restart the laptop.

  When windows has reloaded, double-click the installer for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• PHYSICALLY HAVE A BLU RAY PLAYER but NOT blu ray properties list HP TS L633r

  I have a laptop HP Pavilion DV7-6B55DX, A1T53UA #ABA Windows 7 Pro computer. 64-bit, brown spots. the watch to have a Super Multi DVD burner TS L633R as the optical drive. He also appeared in my Drive Properties. BUT PHYSICALLY I HAVE A BLU RAY PLAYER. I checked by the disc cover of brand with Blu - Ray Disc and Logo and the Blue Laser light rather than red, see also a Lightscribe sensor. After hours of phone with HP they say I don't have Blu Ray (because tasks Brunettes. say it isn't so). Has had a case of Archbishop telling me that the laptop has been changed by someone, and it came not from the factory with her. I bought at BB sealed. He also went to repair HP for a related problem of the United Nations and they have checked that the laptop has never changed. Mgr. case wants to send me for English to look at and remove the Blu Ray and put in a DVD Super Multi burner, as the tasks of the plant requested. The only thing I need is to know what Blu Ray I have so I can get the drivers/firmware. Case PS Bishop was not ready to do any type of Compensation,
  Thus, the player won't play Blu Ray discs. Windows does not recognize a Rayt Blu on the disk. I looked everywhere don't know even how to get a driver/firmware to make it work because, after looking everywhere for a driver and or firmware to get it working, in addition, I do not know what the Blu Ray player is really

  No, it won't. Not if HP has already confirmed that the drive in your laptop must be a SuperMulti DVD, that's all I would do. So your player works, and it's the correct drive. Not much you can do here unfortunately.
  
  My only thought would be to go back to Best Buy and ask them how it happened. Maybe someone caught the laptop bad. They sell refurb and customer returns. They don't sell them as new of course, but they sell them. Maybe that's what you bought?  Sales were also known to slowly open mailboxes, Exchange parts and then return as new.  Best Buy has no idea because the box seems good and put it on the shelf.  Kind of looks like what could happen to you.  I used to work in detail and took people trying all the time.

• Model BDP-S350 will play the dvd but not a blu - ray disc

  So far has never had a problem with my blu - ray player.  The last time I used the player, I watched a dvd movie.  I tried t watch a disc blu - ray today and I kept getting the error message "cannot read disc - unknown.  I tried 5-6 different blu - ray discs.  I made sure that the firmware has been updated and I followed the troubleshooting guide.  Nothing has worked.  It will play DVDs but not blu - ray discs.  Does anyone have a solution?

  Hi jfniep!

  You mentioned that he doesn't play Blu - ray discs? Can I know the title of the Blu - ray disc movies? It's happening on all Blu - ray discs you include those who played before?

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• To play DVD but not CD

  I can play DVD but not CD, what's the problem?

  I can play DVD but not CD, what's the problem?

  ===============================================
  It looks like your optical drive may must be repaired or replaced.

• Satellite U500, replace the DVD RW with Blu - ray?

  Hi all

  Can I replace my Satellite U500 DVD RW with blu - ray or blu - ray rw? and if yes where can I get the part from? or where can I buy origenal Toshiba parts or parts?

  Thank you all

  Hello

  I think that it should be possible, but we need to find an internal Bluray drive with compatible master/slave/c-salt settings.
  Optical disc with bad settings would not be recognized by the BIOS.

  As far as I know that some Toshiba laptops are equipped with an internal bluray drive.
  I recommend a compatible player requesting an ASP.

  Welcome them

• HP mediasmart dvd - play the blu - ray disc Avengers

  Hello

  I have a hp laptop with win 7 Home premium 64-bit.

  I use the HP Mediasmart DvD version 4.2.2.5122 of the software and I can not play the Avengers Blu - ray disc - all other bd drives works fine (tintin, avatar, etc.). Does anyone know if there will be an update for Mediasmart dvd software support disk Avengers?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• 17 - j137cl: HP Envy 17-j137cl plays not Blu Ray

  HP Envy 17-j137cl plays not Blu Ray disc

  Hello

  It doesn't have a drive to read drive BlueRay:

  http://support.HP.com/ID-en/document/c04467663

  There only: a "SuperMulti DVD burner".

  Kind regards.

• Can not pass the DVD to the Blu - Ray - gel

  The tab BUILD, I can switch between DVD and Flash, but not on Blu - Ray. It's just in this mode does not . This is the first time I tried to Blu - Ray on this computer.

  Also if you have plugged the plug very little, I suggest to install this update:

  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN&P ABRAMS

  No matter if you have not installed Roxio stuff, this will fix driver problems.

  Ciao

  Giorgio

• Satellite M30: Mat * a UJ - 820 s read DVD but not CD

  I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

  I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
  I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

  I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

  Any help please!

  Hello

  tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

  http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

  So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

  Welcome them

• Satellite A100 PSAA9A - can read DVD BUT not CD with Windows XP

  I use a satellite A100 PSAA9A computer laptop and I started having trouble with the CD/DVD drive. It was working fine until yesterday when he decided not read no matter what CD I get the message asking me to insert a disc, when there is a CD in the drive. It still reads DVD good.
  I don't know if he has anything to do with the download of the updates of Windows XP because the troubl seems to start after I did.
  Is there somewhere in the creation for the player who controls this? Also when I run the troubleshooting test it always ignores the test of this drive.
  I'd appreciate any help.
  See you soon

  Optical drives, DVDS, has some different faces to work with CD and DVD, but objective and optics are the same. He had arrived, when in one two heads become a dust or something else. I thing that you must visit the Service and your disk cleanup. But do not use a cleaning disc!
  PS. Windows updates, as and OS, are not issues.
  Make sure it's easy - attempt to start bootCD (not BootDVD) with anyone by pressing F12 at startup. If the running machine - it's Windows, if not - DVD player.
  See you soon

• DVD drive read not blu - ray

  OK, I just had a dv7-4165dx and wiped and reinstalled windows 7. I downloaded all the drivers for my laptop but it is not reading blu - ray. Is there a specific driver I need? Help, please!

  Hello:

  You must install the blu - ray playback software supplied with your PC.

  You can see if this version works...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99288-1&CC=US&DLC=en&LC=en&os=4063&Product=5078661&sw_lang=

  Paul

• Down on the Image, but not on the mouse scroll bar event?

  Hi all

  I use an event "Mouse Down" on an image to save the coordinates X and Y of the click and increment a counter.  My problem is that I'm looking at an image with a scroll bar that I want to use to set what part of the image is visible.  When I click on the scroll bar, I set off the mouse event down and increments the counter, which I won't do.

  Is there a way to implement a mouse event to the bottom so that it will ignore clicks on the image scroll bars?  If not, can you think of another way to accomplish what I'm doing?

  Thank you!

  Some quick ideas:

  The scroll bars will be a fixed height or width of the right or at the bottom of the indicator. In the mouse to the bottom of the event handler, if the click happens to a set of coordinates that are in a region of scroll bar, you know, do not increment the counter.

  OR

  Maybe you can overlay a transparent image control such that it covers the image but not the scroll bars, and find clicks on this second control.

  Mike...