End the session

Similar Questions

• When you try to connect to the XP user account, it starts to load then said end the session but don't connect

  When I try to log on my account, he begins to say load my settings personal, but immediately after it is said to end the session once your settings and brings me back to the same screen and I'm stuck. I tried to do this in safe mode and the same thing is happening even with the account admin I also tried using last good known Configuration and not luck. How can I fix it?

  Hey ashok patelTM,.

  1. you remember to make changes to the computer, after which the issue started?

  Try these steps and see if it helps:

  Step 1:

  Unplug all devices (except keyboard and mouse) external connected to the computer and then try to boot to the desktop and check if it helps. Let us know the results.

  Step 2:

  Try the steps from the link to the following article and see if it helps:

  How do I recover from a corrupted registry that prevents Windows XP startup

  I hope this helps.

• How to end the session of a web application?

  For the experienced:
  
  I use JDeveloper 10.1.3.4 and have a question about the end of the session to a web application.
  
  First of all, I would like to clarify that the session I'm talking about is the session that can be seen in the web.xml file, for example,
  

      <session-config>
          <session-timeout>35</session-timeout>
      </session-config>

  If I understand correctly, if there is no user activity, its session ends in 35 minutes.
  
  My questions are:
  
  1. If in the application I don't put the code anywhere to end the session and simply say to the user to close the browser, I tell myself that the session will persist on the server until it times out 35 minutes later. Is this correct?
  
  2. If this interpretation is correct, is there a way for the application to get this session object and terminate when the user clicks on a button (a button ' Quit') explicitly? I find that without end of the session, after the user has clicked on the "Quit" button he can still return to the session of the application by clicking the browser ' go back a page ' button. That is not desirable. Once the user clicks on the button leave, it may be that the user should not be able to come back in this new. This is why I'm looking for a way to explicitly end the session.
  
  3. the application also interacts with the Oracle database server. If in the application there is no code explicitly put an end to the session of the application, the user login on the database server also will persist until the application session expires 35 minutes later?
  
  Thank you very much for your help!
  
  
  Newman

  Newman,

  1. If in the application I don't put the code anywhere to end the session and simply say to the user to close the browser, I tell myself that the session will persist on the server until it times out 35 minutes later. Is this correct?

  Well Yes

  2. If this interpretation is correct, is there a way for the application to get this session object and terminate when the user clicks on a button (a button ' Quit') explicitly? I find that without end of the session, after the user has clicked on the "Quit" button he can still return to the session of the application by clicking the browser ' go back a page ' button. That is not desirable. Once the user clicks on the button leave, it may be that the user should not be able to come back in this new. This is why I'm looking for a way to explicitly end the session.

        ExternalContext ectx =
          FacesContext.getCurrentInstance().getExternalContext();
        HttpServletResponse response = null;
        HttpSession session;
  
        response = (HttpServletResponse) ectx.getResponse();
  
        session = (HttpSession) ectx.getSession(false);
  
        if (session != null) session.invalidate();
  

  3. the application also interacts with the Oracle database server. If in the application there is no code explicitly put an end to the session of the application, the user login on the database server also will persist until the application session expires 35 minutes later?

  Assuming you are using ADF business components - don't. Database sessions are, by default, not assigned to a single user (nor is an instance of the application module). Good read on AM pooling in the docs about the gory details. If you are not using ADF business components - the answer could, of course, be different.

  Best,

  John

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• end the session 2011 problem with hotmail

  All of a sudden, I find that I can't sign out of hotmail. Have you tried the delete cookies option but that made no difference. Help.

  Usually, when you click log off and you get the message that says something like: cannot disconnect cookies are enabled to delete cookies, he said also browser close and reopen. I have never delete cookies, I just close the browser and reopen and I am automatically disconnected. If this does not work for you, go to: Control Panel, user accounts, manage your network passwords, highlight and click on delete. Do not click on backup. They come back again.

• End the session automatically on Windows 7

  I have Windows 7 Home Premium. Is it possible to configure the system where it will automatically disconnect a user after a certain period of time if the computer is not used?

  Hello

  1. is there going to a particular user account or the computer itself turns off?
  2 have any changes to your computer recently, such as the new hardware or software installed or applied updates?

  Method 1.

  Shut down the computer. Remove all external devices if you have connected an and see what happens.

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  I also suggest you to remove the power (regime).

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Method 3:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• TMS 14.4 not send notice of end of the session for all Participants (ends)

  Greetings,

  I saw an old post and I thought that some clients may have a similar problem

  https://supportforums.Cisco.com/discussion/11450416/TMS-not-sending-Conference-ending-notification-TP-rooms#comment-10118276

  In our environment, TMS 14.4 will send notifications which will end the session master endpoint in a call.  It can receive one or more times.  Other endpoints can receive the message once or several times.  Older end points like the series MX (Gen1 or Gen2), or Jabber will not receive notifications.

  In general, it is configurable in the TMS regarding when notifications are sent.  But we found that the messages are sent in Control Panel (display) or the monitor.  If the control panel is a Cisco model, then the message is sent to the control panel.  If the model is non-Cisco (Crestron) then the message is sent to the monitor.

  You can imagine the reaction of the participants when the call ends.  They do not see the control panel for the notifications, but interaction with the call and the on-screen display.

  I thought that TMS may be able to use the "send the message to the system' in the browser part.  Is there an API, I can call and target the script sending of messages to endpoints?

  Thank you.

  TMS usually only send end endpoints conference notifications are managed by TMS, sort of endpoints Jabber like will not work with it without worrying.  Even in this case, the message get sent to one that is configured as the master of video conference.  What you see on the subject where the message is correct, and is by design.  I don't think that there is a way to display on the monitor, if a touch panel of Cisco is used.

  Have you looked at the following setting in TMS: Configuration > conference settings > show video warnings on the Conference ending?

  From 14.3 TMS, you can set it to send notifications to end conference to all the endpoints via the MCU or telepresence Server that hosts the Conference.  Given that it would send Conference ending notifications by the main video track, everyone would be able to see any endpoint is, and they use a Cisco touchscreen as well.  See the MSDS 14.3 release notes, middle of the pg 3 for more information.

• Auto end a Session

  I noticed that whenever a script is run with powershell are leaves a session inactive user in virtual infrastructure...

  is there anyway I can add a command in the script ends the session after the script has been executed...?

  See you soon

  Yes, by using the Disconnect-VIServer cmdlet.

• After you type the master password in session can force type master password once again without ending the current session and start new session?

  Sometimes after using the password to access an account during a given session of firefox, I want to "repeal" this ability of automatic access (i.e. require type the password again once) without having to put an end to the current session and restart firefox.

  It's nice to only have to type the password once per session, there are times when after launching an action that I would let the browser unattended for a short period but to prevent others to access sensitive information on other sites if they can't my master password. Note that this is not the same thing as "locking the browser. Currently, the only way I know to force it is to kill the session and restart the browser but it's not very satisfying if I really want to stay connected (allowed) to a particular site. I hope that adding a button in the Security tab "requires the master password for the current session" would be a simple solution to implement? Thank you for your attention.

  You can connect from the software security device (e.g. click Cancel in the dialog box display the passwords) to force them to return to the MP once more.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Tools > Options > advanced > encryption: Certificates > safety devices: software security device: Logout button

• View 4.5 connect the session ends on the WAN access

  I saw 4.5 upwards and running, although I ran into a problem with connectivity from outside the network.

  I the installation of server Connection View and forwarded ports 80 and 443 to view connect server inside - it's a temporary facility until we run all over SSL VPN.

  I can reach the server, download the client, connect, but when he tries to establish the session on the desktop, it disconnects.  Newspapers the for the user login and logoff, as a the packet capture poster that my outside client ends the SSL connection after trying to connect.  This behavior is the same with the RDP PCoIP protocols.

  My question is: view you must install a server security for external connections, am I missing a port for PCoIP / RDP, or something in the roads is bad?

  I guess it depends on how if you use direct connect to this broker for connections.  If you use directly connect you must put at the disposal of the 3389 of VDI machines to the customer outside. If you are tunneling by this broker for connections, then it should work except PCOIP.   If I'm not mistaken PCOIP uses the direct connect method constantly.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• PowerCenter session ends, the workflow ends much later.

  We have a frequent an end of session, but then the workflow does not complete for 10, 20 or even 30 minutes. It comes from occurring on random workflows that normally take a minute or less to run.
  
  It happens on the workflow out-of-the-box 7.9.6.1 Apps. We use the 8.6.1, hotfix 6 PowerCenter.
  
  Has anyone else seen this behavior?

  Yes Hot fix 11 Informatica, it comes standard with 7.9.6.2, please apply that to 7.9.6.1, it is supported by Oracle

• End of the session

  How could I have shared files, whiteboard and other shared data deleted when the session ends? At present when new guests enter a room they see also data from the previous guests who were all connected on the eve.

  I found the answer.

  I used the example of file upload. I added nodeConfig.userDependentItems = true; for when it creates a new group. I also put the nodeConfig.sessionDependentItems = true;

• How the fire trigger on the end of session/event!

  Is there a way to trigger or some store procedure just before the end of session, but also get information at the end of session (such as Terminal, Machine, user...)?

  create table logoff_tbl (
    who  varchar2(30),
    when date
  );
  
  create trigger trg_logoff
  before logoff on database
  begin
    insert into logoff_tbl values(sys_context('userenv','session_user'), sysdate);
  end;
  /
  

• How can I end a session of hotspoted comments in point 1.4 of the ISE?

  Hello

  I installed 1.4 ISE the long WLC 8.0.120 and I wanted to connect our users comments on the internet through comments hotspot portal.

  insofar as everything is ok and comments users can access the page of hollow internet hotspot, I want to know how I can cancel a user loggined ISE session?

  Thanks in advance,

  Did you watch the Sessions Live yet?  If not, go to the operations-> authentication, and then click the Live Sessions button to the top left corner.  Once that page is loaded, find your session and click the menu drop-down stock cost and select stop Session.

  Tim

• How to automatically restore the session after a crash/update / without asking me if I want to restore it?

  Hello, there are times that my Firefox crashes (well, it happens to all of us who use it to some extent) or updates asking to restart. I would like to know if there is an option that allows you to restore the previous session automatically without asking me even. It would be very useful for reasons. I had this kind of problem a couple of times ending me be upset. Sometimes I misclicked and lost all my important tabs. Other times my firefox has crashed/shifted on after reboot and guess what sound restart still has not even asking me if I wanted to restore my session crashed.

  Thank you in advance.

  Cesarius Hi, I think I understand, but I have not explained completely.

  The browser.sessionstore.max_resumed_crashes preference is to avoid an infinite loop. The default value 1 means an attempt to restore the session automatically once and if it fails (for example, it crashes before it can finish to restore), then display the "embarrassing". You could try to increase the value of 2 or 3 and see if it works on the second or third time. If you still see the screen "This is awkward" after a crash, Firefox still does not make a failback.

  You can also check if there is a file user.js in your profile folder. A user.js file is a file of optional parameters that Firefox reads at startup and uses to override the settings saved in your previous session. Unless you create a user.js file yourself, you can usually just remove it. This article includes a section on the hunt for a possible user.js file: How to fix preferences that will not save.

  Note: by default, Windows hides the .js file extension. Precise work with file names, I suggest setting windows to show all file extensions. This article has the steps: https://www.mozilla.org/firefox/all/