Envy 15 t: corner of the broken battery holder

Similar Questions

• Satellite P300-1GN: greenish tint in the upper left corner of the screen

  I recently bought a Satellite P300-1GN, best laptop, I have ever bought!

  I booted up one morning to find a greenish hue in the upper left corner of the screen, at first I thought it was a graphics issue, but after looking closely, saw there was a line of crack/straight lines in the screen itself.

  Fig 1: [http://onfinite.com/libraries/1506419/600.jpg] sorry for the bad quality, camera phone.

  Photo 2: [http://onfinite.com/libraries/1506420/600.jpg]

  Then I had a glance at the back of the laptop to see if there was marks, see if something had been abandoned or struck, but no indication of that.

  Now the crack grew, and instead of going down, it goes right through the screen :(

  Photo 3: [http://onfinite.com/libraries/1506421/600.jpg]

  Could anyone help as to what could be the cause, and if it is covered by the standard warranty 1 year?

  Hello!

  To be honest, I've never seen such a display problem, but for me it seems to be a malfunction of the internal display. Looks like the internal display is broken somehow

  I think that in this case you need professional assistance from an authorized service provider. Technicians can check the display and tell you how it happened I think.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• My HP envy does not stop and the screen is black

  I tried to restart my laptop but it will not turn off and the screen is black. Help, I don't know what to do!

  Hey Raacbell,

  The ENVY Ultrabook series has a built in battery which can not be easily removed without disassembly.

  If you need to replace the battery due to regular wear of the Lithium-Ion battery on the road, you can see how to replace from page 35 here: HP Envy 4 - Maintenance and Service of Guide.

  Thank you!

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Want M7-K211dx: search for the larger battery

  I use Envy M7-K211dx.

  but the battery is too low. It's only 4 cells.

  So, I'm looking for larger battery, the cell of 6 or 8 cells or more.

  can you let me know the name of the model of the larger battery?

  Thank you.

  @Anderson_Kim_1

  Your 2 options.

  (19) 4-cell, 41 w/h, H 2. 8 a Li-ion battery 756743-001

  4 cells, 48 Wh, 2,3 AH Li - ion battery 756745-001

  Your Service Guide here.

  http://support.HP.com/us-en/product/HP-envy-M7-notebook-PC-series/7527539/model/7734388/manuals/

  REO

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Xperia z3 foto widget display the broken image icons instead of thumbnail/preview image

  Initially, I used my Z3 without SD card. Any word very well: album AND the foto widget that allows to navigate through the photos.

  After

  -installing an SD card,

  -changing the location for newly taken photos on SD card

  - AND by moving some pictures of other directories-

  - AND the creation of a number of files .nomedia on these directories to make these photographs appear not not in the album, nor in the foto widget.

  foto widget displays an icon of a broken image for all photos taken prior to this change. All new photos appear in the widget and app album.

  I delete the file data and the album (in album settings - all apps) cache-.

  It does nothing (so far).

  How can I force the app/widget album to recreate its database and preview/thumbnails?

  Thank you very much.

  M ~.

  Working solution for the following:

  Order the soft MediaStorage
  Settings > Apps > all > storage media (FROM: Medienspeicher) "App Info" > stop App

  Data deleted from the App MediaStorage
  Settings > Apps > all > storage media (FROM: Medienspeicher) 'App Info' > clear data

  Restarted the application (via MyPhoneExplorer) or by rebooting the phone.

  The process appears in the form "android.process.media" in the list of processes (not sure, I guess) android

  To provide a treatment could turn the endurance mode or add "MediaStorage" to the list of exceptions of runing apps background even in mode stamania.

  (> a) how long it would take to recreate the database and photos? The directory of the main image (DCIM on the SD card) contains > almost 1000 photos).

  A: it is __NOT__ take very long. For my 1000 + pictures and a few videos is was a matter of minutes to see the widget started foto avatars correctly and see the album recovers very quickly. If you reach a corner of the album or the photo images widget still not recovered, the image appears rather quickly.

  (>) b where residing the .thumbnails directory? -After accepts the SD - be - it in/storage/sdcard1/DCIM or > in/storage/sdcard0/DCIM as it was before the installation of the SD card?

  R: it seems that the .thumbnails directory still resides on the internal memory (i.e./storage/sdcard0/DCIM). This is at least the case for my phone.

  It also seems that .thumbnails files are ONLY used for the foto widget for the App album someone could confirm?

  (> c) how to either force the media scanner to run and update the widget photos foto and the album database / see/check that

  > it runs.

  Stop the MediaStorage process, clear data from this application and start it again again and keep visiting the widget from the album and or foto.

  See you soon,.

  Michael

• Central pivot in the broken connector

  The connector of the power supply of my HP Pavilion dv6 notebook contained a central pivot, but it broke.

  Despite the axis of the absent, power works, apparently without any problem.

  Now I wonder

  What is the risk to use a connector with a missing pin

  What is the purpose of the PIN

  Thanking you in advance

  sellh wrote

  The connector of the power supply of my HP Pavilion dv6 notebook contained a central pivot, but it broke.

  Despite the axis of the absent, power works, apparently without any problem.

  Now I wonder

  What is the risk of using a connector with a PIN missing? Pin code is apparently not completely broken, or the power supply would not work. The risk is that a partial pn will not establish a solid arc contact and eventually destroy the connector that plugs into the PIN on the external power of the laptop connector.

  What is the purpose of the PIN? The axis provides a polarity (+ or-) of the voltage required by the motherboard and battery.

  I suggest to replace the power supply. Take a look into the connector on the laptop. The broken pin part is probably still inside the connector. If this is the case, then it must be deleted so that the new power supply does not work properly.

  Thanking you in advance.

  Best regards

  ERICO

• bad battery or DC power converter? the main battery (internal) (error 601) windows displays battery to

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  althefirst wrote:

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  This error is a bit confusing.  At first glance it seems to refer to the CMOS/RTC battery but actually refers to the main battery to the laptop.  Even if the computer indicates that the battery is at 100%, it would be a good idea to check that it is in working condition.  I think that it is a good first step, because although it doesn't show 100% charge, you say the laptop does not work unless it is on current alternative.  This paper addresses the issue further.

  As indicated in the document, the HP Battery Check will be performed to determine if the battery is faulty.

  To perform battery check do the following and display the result.

  1. Unplug the power cord and turn the computer off.
  2. Press on the button / stop to turn on the computer.
  3. Press the ESC key immediately seeing the HP or Compaq logo screen.
  4. The Start menu appears.
  5. Press F2 to select F2 System Diagnostics .
  6. Select battery Test in the list of diagnostic tests.
  7. Connect the power supply cable.
  8. Click Start Test Battery on the battery Test page.

  If your battery fails this test, it will need to be replaced.  To get a spare battery, you will have to contact HP Support.  If you are in the USA / Canada you can call to the 1-800-474-6836.  If you are located outside of this area, you will need to go to the HP support site and after selecting your country, search for "Customer Support" in the lower right corner to get contact information for your region.

  I hope this helps!

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• iPhone 7 more draining the extreme battery

  I got my iphone 7 more for 5 days and have all of a sudden severe battery drain issues. I'm talking to death in 4 hours with no use.

  -All liquid apps

  -Battery screen indicates the drain comes from "home & lock screen.

  -The phone will not auto lock on any time setting

  -Disabled "raise to wake up" and not change

  -When I manually lock the phone, battery drain happening again

  -My phone is getting really hot during the evacuation with the screen off

  -My watch empties as soon

  -J' I restarted my phone and look twice

  -Phone is struggling to load faster than battery drain

  Anyone else having these issues? What can I do else?

  You're not alone: Re: iOS 10 battery draining / overheating

• Well confused. I use click on Favorites in the upper left corner of the screen. I can still but I can't access the properties of the bookmark

  I used to just right click on a bookmark of Bookmark menu in the upper left corner of the screen. Now when I right click on Favorites, I can't get any of the choice to highlight, they are subject, and nothing happens. But if I add bookmarks little star at the high right to help customize I can access an area of the one bookmark away. Seems that just suddenly happened. I like to use the left side of the screen, but cannot access the properties there. Any difficulty?

  Devil well, now, all is well, seems to set just after a reboot. So solved my problem all by my lonesome. Please disregard.

• YouTube video plays in the left upper corner of the screen.

  Very well. The problem is that since the update for Firefox 37.0.2 I have problems playing video on Youtube.com and sometimes Newgrounds.com. In Youtube I play a lot of videos show only now in the upper left corner of the screen and the size of this video does not change even in full screen. There's the size of a small tile. I tried to disable add ons, and virtually everything suggested on various web sites. On new grounds, videos and games returned backwards and forth like the occasional video, but the video question on Newgrounds is not as bad as the issue that Firefox has with some of the games.

  I tried the games on Internet Exploder and exact same videos and I get these questions. It started to happen after the update to 37.0.2.

  I use Windows 8 (COMPLETELY up to DATE) and I have the latest version of Flash. I managed to narrow it down to a problem of Firefox and many others still reported in various sites addressing this issue as a bug in Firefox. I agree with this observation. Even my video drivers are also updated. My computer uses the Intel 4600 drivers.

  Features model relating to this issue:
  ASrock Z97 Pro3
  Intel graphics (onboard)
  16 GB of RAM

  If a right click on the drive on YouTube shows a pale menu mentioning the HTML5 player, which uses built-in features of Firefox. If she mentions the Flash drive, then it uses the Flash plugin. It would be useful to know the next steps.

  It is a standard orientation which addresses the most common issues with the Flash Player plugin. I'm sure you've seen some of it before, but just in case:

  (1) If you have any recorders/downloaders who interact with Flash media to ensure that they are as up-to-date as possible, or disable them temporarily.

  (2) turn off hardware acceleration in Firefox and Flash

  (A) in Firefox, uncheck the box here:

  "3-bar" menu button (or tools) > Options > advanced > General > "use hardware acceleration when available.

  Which takes effect the next time you exit and restart Firefox.

  (B) in Flash, right-click in the press and choose settings, then the first mini tab and uncheck the box to use hardware acceleration. More information in this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off mode protected (Windows Vista and later)

  The functionality of the safe_mode of the Flash player plugin has security benefits, but there seem to be some compatibility issues on some systems. There is a hidden for this parameter:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

• Where is the "Firefox" printed logo which is supposed to appear in the upper left corner of the page?

  When Microsoft installed Firefox on my computer there was a small, orange, with "Firefox" logo printed in it in the upper left corner of the page. He went, and the guests of teaching direct use me to go. How can I get it back?

  Thanks Matt. Another person told me how to remove the menu bar and BAM he was there, someone else says to press F11 and it works also. As I told them, I am 62 yr.s old, has not been raised with these wonderful machines, but I'm slowly learning. Thanks again!

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards