Envy touchsmart 15-j070us: Ethernet & network controllers

Similar Questions

• Envy touchsmart 15-j070us: drivers for Envy 15-j070us

  Hello world

  A year ago I bought my Envy touchsmart with 8 victory 15-j070us laptop... Finally, I got fed up with him because I never got used to it, so I did the downgrade to win 7.

  After installation, I realized that the drivers for USB and network-ethernet ports are not recognized by the operating system or they are just missing.

  I tried to search for the drivers but couldn't find them, also I do not know how to get my drive without taking the HD to the computer.

  Can someone help me please?

  AMD chipset:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  Realtek Ethernet LAN:

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56461.exe

• Missing Ethernet, network controllers SM Bus and PCI device after a clean install of Windows 7 64 bit

  Hello friendly folk,

  I got a used HP Pavilion G6 - 1C40CA.

  There was a clean install of Windows 7 Home Premium 64-bit.

  After searching around online, got a hint of what to do.

  For Device Manager are missing or not that there is not (small yellow exclamation triangle):

  Ethernet controller (Hardware ID: PCI/VEN_10EC & DEV_8136)

  Network controller (Hareware ID: PCI/VEN_14E4 & DEV_4727)

  PCI device (Hareware ID: PCI/VEN_10EC & DEV_5209)

  SM Bus controller (Hardware ID: PCI/VEN_1022 & DEV_780B)

  As well as to find good downloads, I know not to order that I should be their installation (if there is a specific order at all), and if I have to restart every time that I have install something again.

  If someone could be kind enough to drive me very precisely by the process? Pretty please? ^_^

  Hello:

  The first pilot, you need to install is for the smbus controller.

  Download and install the amd chipset drivers and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Here's the rest of the drivers you need in the order you posted the material ID's, and you can install them in an order any that you like...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

• Envy Touchsmart 15j018tx: THE WORST NETWORK EVER 15 ENVY TOUCHSMART HP

  THE WORST INTERNET WIFI CONNECTION ISSUES FRICKIN!

  It's really crazy for such mobile high-end!

  It continues poor wifi signal and keep disconnection for some reason any!

  It drives me crazy! DIFFICULTY PLEASE<-- solution="" please="" hp!!!="" dont="" make="" me="" dissapointed="" more="" for="" buying="" this="">

  I agree that you should also check your router connection. try to reset and check the protocol settings WPA - WPA2. I read in other forums that this might cause problems to windows8, so google it.

  As your computer, was there all the time it worked normally? When you bought first didi you change something?

  Try this solution from another thread. (http://h30434.www3.hp.com/t5/Notebook-Hardware/Internal-Power-Error-upgrading-Windows-10/m-p/5168771#M190265). They use it for problems with graphics drivers, but use it to your wireless drivers.  After you return to a normal startup, enter the Device Manager and reinstall the drivers that you uninstalled.  It's something like a clean install, so try.

• Envy of HP Touchsmart M6 - k022dx: network (Ethernet/WiFi) for HP Envy Touchsmart M6-k002dx drivers?

  Hi all

  Had to replace a dead hard drive and installed a new one with Windows 7 on my niece envy Touchsmart M6-k022dx. Can anyone recommend Windows 7 drivers for this model of work. I thought that I did need to get the ethernet/wifi working so that I can update the Windows 10 laptop and then install the drivers of page drivers. Any recommendation is greatly appreciated.

  Thank you

  You are the very welcome.

  See if this driver W7 IDT Beats Audio works on your model.  Install and reboot the PC.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

• Network keeps falling and reconnection - HP's ENVY touchSmart m6 sleekbook.

  Original title: HP ENVY touchSmart m6 sleekbook keeps falling and reconnecting network connection

  While on the website connection is deleted without warning and after a few minutes reconnects to the server used previously. The computer is new with window 8. Try to find out what causes gout and prevent it from happening.

  I had the same problem with mine.  I'm still not sure I fixed it completely, but I found that there are two network cards installed and disabling one of them seems to help.  I found it under device manager.  I have disabled the microsoft network card.  I hope this helps.  Good luck!

• 14 envy Touchsmart k074 WIFI connection

  Hi, I have an ENVY TouchSmart 14 - k074ca Sleekbook, running on Windows 8.1.

  Recently updated my Modem/Routert to a system of dual band at high speed. This router WIFI channels are in the band 2.4 GHz and 5 GHz bands.

  My Hp Sleekboog sees the 2.4 GHz signal, but he is unable to see / connect to the 5 GHz signal.

  What should I do to access these two signals/bands?

  FOR INFO.

  My old IBM laptop and IPad have no problem seeing and connecting to each signal/band.

  Thanks in advance for your answer

  Rudi

  Hi RudiL,

  I understand that you are having problems with your wireless network and your WANT from HP TouchSmart 14 - k074ca Sleekbook. You could try the rest of this paper on the discovery network and file sharing on each computer that you want to access on the network. Here is a link to this document.

  http://support.HP.com/us-en/document/c03535285

  Make sure that all of your Windows updates have been supported.

  I searched Microsoft for a fix for this and that they indicate on the forums that if you change the channel of the router to 36, this will solve the problem of connection of 5 GHz.

  Hope it will be useful.

  Thank you.

• ENVY TouchSmart m7-j120dx: need to upgrade tips - ENVY TouchSmart m7-j120dx

  I have the mobile suite:

  ENVY of HP TouchSmart m7-j120dx Notebook PC

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M7-J100-notebook-PC-series/540117...

  I want to spend as a result of:
  500 GB SSD
  16 GB OF RAM

  From the following link, I discovered that the RAM should be SO-DIMM DDR3L-1600 with 1.35 volts
  I also know, I need this cable and caddy:
  http://www.Amazon.com/HDD-cable-Caddy-envy-J000/DP/B00GIGJYBG

  Now my questions,

  1. I currently have two 4 GB of RAM at 800 MHZ. If I buy a 8 GB 1600 mhz and use with one of the 4 GB of RAM I have, it's going to work?

  2. What is the maximum memory supported by my laptop? The first link, it seems to me 16 GB max.

  3. I need too amazon links for compatible RAM for my laptop for the 8 GB and 16 GB.

  4 I need also links amazon to compatible SSD drives. I'm looking for 500 GB.

  Thank you
  Jay

  Hello

  The following manual will answer most of your questions:

  http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

  1. not all the RAM sticks are the same. My suggestion to use Crucial to get the right result:

  http://www.crucial.com/USA/en/memory-info

  2 Max is 16 GB as mentioned on page 2 of the manual,

  3. as #1 above.

  4. all standard SSD can do, you can see as Crucial to the right, and you can buy on Amazon after obtaining the right of Crucial.

  Finally, you need ONLY the caddy if your goal is to install 500GB SSD on the second span.

  Kind regards.

• Cannot access Ethernet network

  I have recently updated my network router and has difficulties to get things to work. My Internet is wireless (no land line). For more than 6 years, I have used with success a Netgear MBR624GU 3 G Router wireless broadband that allowed me to access the Internet as well as to support a physical Ethernet network (with other computers, printers and a Sonos music system with the iTunes library on a NAS). The Netgear router was also on the Ethernet network (all with 192.168.2.0/24 IP addresses). There is also WiFi access for iPad, etc.

  Go now my new contract LTE brought me a router Huawei Mobile WiFi E5577C. There is no Ethernet port. I managed to access the Internet through it. However, I cannot now access the Ethernet - ping reports "Request Timeout" and printers and Sonos system are not accessible. This seems strange to me, I thought of a direct access to the physical network should be easy. I tried things like turn off Wi - Fi, but who did not have Ethernet access works. I put the Ethernet network with the highest priority in the order of Service, a second Wi - Fi connection. Currently I have two Ethernet and Wi - Fi configured manually (attribution 192.168.3.0 Wi - Fi and Ethernet 192.168.2.0 IP addresses, Wi - Fi with 192.168.3.2 as router - I also tried to use DHCP but with no more success). I also tried with and without the Netgear router that is also attached to the Ether net but that doesn't seem to make a difference.

  I thought that I have perhaps need a router different with a port Ethernet (like the Netgear) but, given that I have to pay for that myself, I know whether it is the only solution before spending money.

  I guess I understood something wrongly in this configuration. If anyone can give me any advice or suggest what I might try, I'll be very grateful. If I should post more detailed data, please let me know.

  You are going to have to implement some sort of IP routing or bridging of the connected to the wireless network, or you will need to implement local areas with several connections network with separate subnets.   You might need the static routes for devices with multiple network paths, but you will need at least to have your wireline and wireless in separate subnets.   This so that your network traffic can be set via Wi - Fi to the ISP, or via cables to other local devices.

  Or get a modem that has wired and wireless.   Or one that has a cable, if you are inclined to set up and manage your own network.

  If there is the budget and the desire to run your own network...  My usual preference involves isolated for each of the main functions and including the PSI at the edge device and devices configured to a minimum.   In other words, an ISP modem device with a wired connection and a "bridge" of the ISP connection mode.   Then a box of firewall router gateway controlled locally and a distinct feature of Wi - Fi and preferably one with an access point (AP) mode.   Get your own gateway firewall services, NAT and associated box.   Keep your ISP as simple as possible.   It is more boxes at the front, but when a box crashes or when you change your ISP, you may need to change only the ISP modem.  Other devices will not need to change.   There are positives and negatives of this approach points as, for example - you also manage all the security of your network and your configuration, 'in' your network 'behind' the ISP modem.   The ISP technicians can get only in what concerns the modem and only will help you with the part of your network.

  Network Bridge: works like a piece of wire to a wired network for most of the considerations.  Transparent background for IP network traffic.

  Network router: transfers the IP traffic between two or more different IP subnets.  Very well visible for IP network traffic.

  Welcome to IP network.

• How to add the computer to the ethernet network

  For some unknown reason, a MacBook Pro than on the ethernet network home. Previously I would just plug the ethernet cable and the connection is between my Mac Pro and the laptop, but not more. What are the settings must be restored?

  If no changes were made for all the work previously to check setting on the Mac, the other end. The cable could be bad or the router/modem may have been modified. I guess that all Internet services do NOT work on the laptop.

• Ethernet network card does not show my Satellite L830 - 16H

  Hello

  Ethernet network adapter do not show my Toshiba Satellite L830 - 16H, and it can not reset it

  What can you do to restore it?

  I thank everyone

  You can try to access the BIOS (turn the unit on and press F2) and set it to default and save the changes.
  Sometimes this help

  Otherwise, it can be device LAN card problem.
  The fix can be very expensive because such port is part of the motherboard.

  I think you can try using an optional USB LAN RJ45 Ethernet adapter

• 15 clicks Ghost Envy TouchSmart

  Hello

  I need to make this folder somewhere - thing

  My HP Envy TouchSmart E3S19UAR 15 had a problem of ghost-click with the touch screen from the first day. I did all this as recommended on these forums (and), including all updates, reinstall crushed, blah blah blah. Even sure my screen is clean and all other physical possibilities are excluded.

  The problem, like many others on these forums, comes after Windows puts the system to sleep. This happened under Windows 8.0 and continues under Windows 8.1. It goes right now.

  For some time, I thought the problem was solved - but then this weekend, my battery died suddenly. You see, in order to solve the problem, I had changed my setting of the system of 'Always On' power and changed other settings that Windows has gone to sleep. To realize that, I changed power settings back to "sleep mode"... and of course, in the awakening of his first sleep in a few months, ghost-clicks of the system started up again.

  This is why I write - I am a few hours away from my expiring warranty (it is daylight saving time of 22:00, 20:00 for the time zone apparently used here). People of guaranteed phone HP just me transferred to the support paid and was told that the warranty service would not help. The website of HP warranty, confirms nevertheless that I am still under warranty. (Yes, I have screenshots and documents printed with the stamps).

  So I intend to continue tonight if I can and certainly tomorrow (Monday) when there is hope that American support. Since I don't know how else to do this thing on the record, I post here.

  Please help, someone from hp. I'll call.

  Thank you.

  Tim C

  series 6xxxxxxxxG

  [Note: edited by OP to delete serial No. after the issue is resolved.]

  I asked the escalation of your problem. Cannot lead to any action - but at least maybe it will help with your documentation.

• Upgrade of an ENVY TouchSmart 17-j005ea

  I plan to replace my Dell with what would be my first HP laptop (a 17-j005ea ENVY TouchSmart), but I'm not sure if I would be able to upgrade.

  I'd be looking to replace one of the hard drives with a SDD and replace the DVD drive with Blu - ray burner, but I heard that the upgrade can be a problem with some HP laptops.

  These upgrades would be not possible for a person with basic experience of the PC?  (I create my own desktops and have upgraded discs and memory on Dell laptops without difficulty.)

  Depends on how you define the problem. Here's an announced a swap and go for replacement:

  http://www.eBay.com/ITM/HP-466803-501-656795-001-6x-Blu-ray-burner-slot-in-drive-envy-Omni-TouchSmart-/121233654476?PT=US_CD_DVD_Blu_Ray_Duplicators & Hash = item1c3a16c2cc

  Here is the Service Manual:

  Manual

  Page 56. Remove the service cover and screw. Drag the old drive on. Remove the cover of the old drive and pop on the new and slide in. You will need a Blu - Ray as the current version of Power DVD burning software and software Blu - Ray as the current version of Nero.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

  I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

  • 64-bit Windows 8
  • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
  • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
  • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
  • • 2 TB 7200 RPM SATA Hard Drive
  • • Microsoft Office Trial

  Thanks in advance for your suggestions and help!

  Create a recovery disk set before even considering the upgrade.

  If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

  I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

  Important factors for Windows 8.1 are available on the web support download portal for your PC.

• install the tv tuner to HP ENVY TouchSmart all-in-One 23-d160qd

  I have a HP ENVY TouchSmart all-in-One 23-d160qd that I ordered from hp.  I would like to run ota tv via my pc and use it as a dvr.  Is it possible to add the tuner to my all-in-one, or I have to look for other solutions?  What other options are available?  Thank you

  It is not recommended to install certain devices such as TV Tuners within the unit due to the complexity in their design and the ability to add additional hardware. However, you can use the USB TV Tuners and connect to a USB port and start using it for your needs.