EPM 11.1.2.3.500 LCM

Similar Questions

• 11.1.2.3.500 LCM undocumented bug / uncompressed export

  I don't know if it's documented. Normally in 11.1.2.3 when you perform a full export of a planning application it's zipper upward. In 11.1.2.3.500 this is not the case when Essbase data is included. It will drop a folder in the what with all of the relevant artifacts.

  When planning application LCM export 11.1.2.3.500 uncheck Essbase data. Then run (FINPLAN or some application name your use) will now be zipped to the top as he would in the 11.1.2.3 before correctifs.500 is applied.

  Please take a look and let me know if others get this behavior. I think that it is a bug that is not documented. Unless I missed something in the documentation. Who at that time, I gladly would he use for SEO.

  Thank you
  DjSmeadly

  I think that's the way it should work, what follows is of the HSS.050 patch readme when data has been introduced at LCM, it aims to Essbase but it follows the same logic.

  "In 11.1.2.3.050 during export Essbase application: If artifact of data is selected, the exported content will be exploded as a file format." If data artifact is not selected, then the exported content will be be zipped up to the threshold of<=1.8GB. anything="" above="" this="" will="" be="" automatically="" stored="" as="" exploded="" folder="" content. ="">

  See you soon

  John

  http

• EPM 11.1.2.3.500 - book of financial reports error:; nested exception is: java.lang.NullPointerException

  Hi all

  We have up gradation of EMP 11.1.2.3.500 11.1.1.3.

  We have financial reports book for HFM.

  When we right click on the books and select 'complete book as PDF', we get after that error

  "the nested exception is: java.lang.NullPointerException.

  

  

  any idea?

  Kind regards

  Dattatray - Mate

  Hello

  We have solved this problem as follows,

  1. open this book report

  2 remove the reports within the book.

  This is how it works for us

  Kind regards

  -Matt Dattatray

• EPM 11.1.2.3.500 icons of Financial Reporting are not filling but reports work.

  I installed four systems EPM and not experience this problem until the installation of fifth.

  EN icons aren't the people in the Explorer window.

  The most curious is that the report is generated as expected.

  Have faced a similar issue?

  One of the key factors are the new facility as a new policy in place, forcing the use of the IPv6 protocol. I wasn't able to find any reason possible othe Missing In Action of the icons.

  

  Thank you

  M Daniel

  Hi Daniel,.

  You can see the following Oracle knowledge article: make icons are not displayed in Module Explorer (Doc ID 1320028.1)

  Kind regards

  KK

• EPM 11.1.2.3.500 and IE10 compatibility issues

  Maybe I missed something, but after I installed the 500PSU and using IE10, I found the following:

  I am able to connect in the workspace and HFM with no compatibility setting (native IE10)

  I am only able to connect to the FDM with IE10 in compatibility mode

  Is this normal or did I miss something on the side FDM, I thought all EMP 11.1.2.3.500 IE10 certified?

  We are using IIS and OSH on Win2k8r2

  Hello

  Did you follow the additional steps for FDM in the Readme for the 11.1.2.3.500 patch? I have them copied below:

  Additional steps for managing the quality of financial data

  If you plan to use Internet Explorer 10 with FDM, please add to IIS 7 and IIS 6 HTTP response header, by following the steps below:

  Adds a header of HTTP to IIS 7 response:

  1. Open IIS.
  2. Expand the server name in the left pane: expand Sites, and then expand default Web site, and select HyperionFDM.
  3. In the right pane, under IIS, double-click HTTP response headers.
  4. On the right, under Actions, click Add.
  5. Add new response HTTP X-UA-Compatible header name and the IE value = EmulateIE9.
  6. Save the changes.
  7. Recycle the AppPool HyperionFDMAppPool.

  Adds a for IIS 6 HTTP response header:

  1. Open IIS.
  2. Expand the server name in the left pane: expand Web Sites, and then expand default Web Site, and select HyperionFDM.
  3. Right-click on the HyperionFDM site and click Properties.
  4. Select the HTTP Headers tab.
  5. Under the custom HTTP headers, click Add.
  6. Add new response HTTP X-UA-Compatible header name and the IE value = EmulateIE9.
  7. Save the changes.
  8. Recycle the AppPool HyperionFDMAppPool.

  If you have not followed these steps that could well be your problem.

  -Dan

• Patch Oracle EPM 11.1.2.3.500

  Hello

  I intend to apply the patch 500 to EMP 11.1.2.3.000 version.

  First condition is a software of Visual C++ 2005 Redistributable Package after that I need to apply the Patch Update Set (PSU): 17529887 for all products Hyperion and Essbase Server 17767302

  So my question is

  1) do we need to apply the patches of the ADF? If Yes, what are the numbers of patch? Do we need to apply the ADF patch before applying the patch 17529887 ?

  (2) here 17529887 will be responsible for Hyperion products unlike when we apply the 300 to 11.1.2.2 version patch each product as each patch.

  (3) in the Essbase Section, we have a patch called RunTime Client patch. What is the use of this? It's nothing but EAS Web Console Patch?

  Thanks in advance. Appreciate your help on this.

  If you're using FDMEE and patch then Yes you must apply the hotfix ODI.

  Everything you need for the OHS change is edit the file and add the line in the patch.

  If you use not HFM then you would not be possible to save an adapter for a product, you have not installed.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• EPM 11.1.2.3.500 - queries Smart Smart View Provisioning

  Hi all

  Quick question around active requests in SV (SV:11.1.2.5.215) and users provisioning. Did some tests today - it seems that only users with administrative privileges for the Cluster Essbase can visit to create Smart queries - if not, they are presented with a #NoAccess warning in the upper part of the House.

  Anyone experience this before?

  In fact, we had exactly the same problem. Open a ticket with oracle a few months back. They confirmed it as a bug and the fix to come to 11.1.2.4. I still have full SR. Intelligent Query can / must be read-only users too.

• DRM FDMEE ODI

  1. made of sync DRM for FDMEE... If it is not planned for it?

  2. FDMEE is not support for ODI 12...

  If FDMEE will not support ODI 2... What is the workaround for the environment using FDMEE, ODI g 11, EPM 11.1.2.3.500 and you want to upgrade ODI at 12 g?

  We go to 11.1.2.4 suite upgrade, no worries

  1864576 wrote:

  Have a question, support would be FDMEE 11.1.2.4 11.1.2.3.500 planning and Essbase 11.1.2.3

• Import workspace Document-Script error

  Hi all

  We faced to the workspace under question.

  Error: could not detect the Version of the browser

  Support matrix - supported platforms matrix - Oracle Enterprise Performance Management System

  

  Please not it's only limited to IE11 support, it should be + 11.1.2.3.500 and Enterprise Mode and it is limited help to check the support doc:

  Policy to support the EPM 11.1.2.2.500 system and 11.1.2.3.500 with Internet Explorer 11 (IE11) (Doc ID 1920566.1)

  See you soon

  John

• Why drill-through of SmartView happen to a "no data to display" landing page?

  Hi guys,.

  EPM 11.1.2.3.500

  Exalytics

  Drill-through planning of forms to works very well FDMEE then to Excel/SmartView/Essbase happens to an empty FDMEE landing page.

  Y at - it specific settings of SmartView drilling?

  Thank you

  Rafael brands

  It is not currently possible.

  Please take a look at the ERPI: drill through not showing all data from Smartview (Doc ID 1538803.1)

  Thank you

• Why statistical data loading fails if there are periods without data?

  Hello

  EPM 11.1.2.3.500 on Exalytics

  Try to load statistics of several periods (from Jul_2012 to Aug_2014).

  So is having some of them with no data, it stops.

  Is this normal? Or it should load at least the rest of the data?

  Traceback (most recent call changed):

  File '< string >", line updateTDATASEG_T_TDATASEGW, 1982

  RuntimeError: [u "error: no record exists for period"Jul_2012"', u ' error: no record exists for period"Aug_2012"", u "error: no record exists for period"Sep_2012"", u "error: no record exists for period"Oct_2012"", u "error: no record exists for period"Nov_2012"", u "error: no record exists for period"Dec_2012"", u "error: no record exists for the period"Jan_2013"' u"error "] [': no record exists for period "Feb_2013" ', u ' error: no record exists for period "Mar_2013" ", u" error: no record exists for period "Apr_2013" ", u" error: no record exists for period "May_2013" ", u" error: no record exists for the period "Jun_2013" "]

  2014-08-28 06:44:59, 387 FATAL [AIF]: error in data comm. plan

  2014-08-28 06:44:59, 397 [AIF] INFO: end process FDMEE, process ID: 380

  Thank you

  I agree that the messages in the details of the process should be more informative about the cause of the failure.

  I suggest you raise an enhancement request

  Please, you can mark this question as answered while others can see his reactions?

  Concerning

• Substitution Variables database

  Hello guys,.

  In the EPM 11.1.2.3.500 system where are stored the substitution variables, wise db?

  Thank you

  Right-click on the server in the EA and then edit > Variables. Here, you will get a list of all the variables, and it will also show if they are set at the level of the server, the application or database level.

  For your next question, where variables are stored. All substitution variables are stored in the file essbase.sec (essbase security file)

  When you try to view the variables, it go from variable substitution, and when you try to edit and save any variable, then it will update the security file.

  Hope this helps

  See you soon

  Amarnath

  ORACLE | Essbase

• What ODI version comes with EPM version 11.1.2.3.500.17?

  Hi guys

  Could you help me to know what version of ODI is delivered with the 11.1.2.3.500.17 EMP?

  Thanks in advance.

  No it is not certified, see the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• EPM 11.1.2.3 Patch 500

  Hello

  In details of Readme 500,.

  I need to perform under thing

  Update the EMP Instance with the new report batch scripts (not required if you have installed 11.1.2.3.100 or 11.1.2.3.200): copy the %EPM_ORACLE_HOME%/products/FinancialDataQuality/bin/runreport.bat.template to: %EPM_ORACLE_INSTANCE%/FinancialDataQuality/runreport.bat

  This means that I need to copy the contents of runreport.bat.template to runreport.bat and place it in the folder % EPM_ORACLE_INSTANCE%/FinancialDataQuality. I force understand this line. Please help me.

  Yes sorry copy runreport.bat.template to the location of the target and rename to runreport.bat

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Oracle EPM Planning 11.1.2.3.500 data loading issue

  We do a load all night at our project and dimensions of a csv file. We use a unix shell script command to build to start this process.  First, we conduct a dry using the / N command, if this is successful we then update and save our contour using the / C command. The problem is that dry running checks only the file to make sure that it is valid, it does not test the file against the contour.  I was wondering if anyone knows of an order, that I can use to test against the contour csv file WITHOUT saving it. This way if there is an error in the file, it will not update our plan with incorrect data.

  Thank you.

  I agree with Sunil.

  You will need to run the file through a few scripts to check some things that you are looking for.

  I had a similar problem to another client, they also check that their wasn't any what issues/releases (alias) for the construction of the dimension when running on the day the day.

  The solution came us up with a (do not know if it would work in your scenario), we have treated our generation of dimension file towards the end of the company.

  So we had a race the night before and if there are problems they are sorted before the race every night. Minor problems that could be corrected using fact, how if there were too many questions of a change in the hierarchy, we not treat of the day to the next and get the company to fix their hierarchies before we reconstructed again.

  Concerning

  Jimmy