EPrint labels do not align

Similar Questions

• Using the list of my icon and ar text label does not align correctly!

  AS3: In the list of components my ar icon and the text label is aligned properly, when the application is started, the label text is on icon and when I put the mouse on any item in the list then alignment is ok. What's not here?

  That's when I test flash application:

  

  And when I put the mouse pointer on any element, the alignment of the icon and the label is ok! and it's like this:

  

  I do not understand where is the problem, please help! Here is the code:

  Stop();

  Import fl.controls.listClasses.CellRenderer;

  import flash.text.TextFormat;

  Import fl.controls.List;

  Import fl.controls.Slider;

  Import fl.events.SliderEvent;

  Import fl.controls.List;

  import flash.display.Loader;

  import flash.display.MovieClip;

  import flash.net.URLRequest;

  Import fl.data.DataProvider;

  initialization

  var imageLoader:Loader = new Loader();

  friends of the var: Array = [];

  var dp:DataProvider = new DataProvider();

  friends [0] = "icon/general.png";

  list.iconField = "iconSource";

  list.rowHeight = 40;

  list.dataProvider = dp;

  /////////////////////////////////////////////////////////////////

  Loading XML

  /////////////////////////////////////////////////////////////////

  var xmlData:XML;

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, LoadXML);

  xmlLoader.load (new URLRequest("Media/materijali.xml"));

  function LoadXML(e:Event):void

  {

  trace (LoadXml);

  xmlData = new XML (e.target.data);

  function getValues(input:XML)

  {

  var xmlCategoryList:XMLList = input.children ();

  var point: XML;

  var intCount:int = 0;

  for each (item xmlCategoryList)

  {

  imageLoader.load (new URLRequest(friends[0]));

  imageLoader.scaleX = 0.3;

  imageLoader.scaleY = 0.3;

  dp.addItem ({iconSource:imageLoader, label: item.naziv, data: item.autor, data1:item.putanja, data2:item.opis, data3:item.mapa, data4:item.tip});})

  intCount = intCount + 1;

  imageLoader = new Loader();

  }

  } //end for function values

  getValues (xmlData);

  } / / end of loading XML

  /////////////////////////////////////////////////////////////////

  Start the function of list manager, itemClick

  /////////////////////////////////////////////////////////////////

  var varime, varautori, varurl_dok, varurl_opis, varurl_mapa, vartip:String = "";

  list.addEventListener (Event.CHANGE, itemClick);

  var opis_rada:URLLoader = new URLLoader();

  function itemClick(event:Event):void

  {

  XML podaci

  var ime:String = event.target.selectedItem.label;

  authorized var: String = event.target.selectedItem.data;

  var url_dok:String = event.target.selectedItem.data1;

  var url_opis:String = event.target.selectedItem.data2;

  var url_mapa:String = event.target.selectedItem.data3;

  Tip of the var: String = event.target.selectedItem.data4;

  varime = ime;

  varautori = allowed;

  varurl_dok = url_dok;

  varurl_opis = url_opis;

  varurl_mapa = url_mapa;

  vartip = tip;

  }

  fill your dataprovider after the icon loading is complete.

• PHP form labels do not align with checkbox

  Help!

  I can't get my labels on my registration form to align with the boxes down.  This form is online at www.thectkgroup.com/signup

  Thank you!

  Add the following code at the end of screen.css

  #newsletter .formpart input [type = "checkbox"] {}

  Width: 150px;

  }

• anychart labels does not display correctly...

  Hi all...
  
  Anychart Version: 5.1.2
  
  I have a single bar bar graph which calculates the surgeons and their percentage of surgical interventions.
  x axis: name of surgeon (labels turned 90 degrees)
  y axis: percentage
  
  If I show just 10 surgeons is to show correctly.
  But if I try to show to all Surgeons (about 100 surgeons on the x axis).
  
  The Flash chart x axis labels are not displayed correctly
  
  In this thread... Austin has proposed to increase the width of the graph
  APEX graphic Flash labels not displaying
  
  If I increase the width labels display correctly. But the picture is so ugly with huge width. Y at - it another way to display labels correctly
  without increasing the width of the graph
  
  In Mozilla filefox, I checked that the returned XML. In XML, this is show the labels but in the table
  He does not appear.
  
  The x-axis of the sample...
  
  The X axis is looking like this...
  
  -----------------------------------
  s s
  u u
  r r
  g g
  e e
  o o
  n n
  1 3
  
  It does not show the "surgeon 2" which is between 1 and 2
  
  It's the custom XML part that I use...
  

  <anychart>
  <margin all="1"/>
  <settings>
  <animation enabled="true"/>
  </settings>
  <charts>
  <chart use_anychart3_data_model="true" use_sets_colors="false">
  <chart_settings>
  <title enabled="True" vertical_padding="30">
  <font bold="True" size="15" />
  <text>Death by Surgeon</text>
  </title>
  <subtitle enabled="True">
  <background enabled="false" /> 
  <font bold="False" size="15" />
  <text>Arranged by Increasing Annual Rate of Procedure</text>
  </subtitle>
  <footer enabled="true" align="Center" padding="30"> 
  <background enabled="false" /> 
  <font bold="False" size="12" color="Red"/> 
  <text><![CDATA[Notice: This report generated considered privileged and confidential. &APP_TIME_STAMP.]]></text>
  </footer>
  <axes>
  <y_axis>
  <title><text>Percentage</text></title>
  <labels>
  <format>{%Value}{numDecimals:0}</format>
  </labels>
  </y_axis>
  <x_axis tickmarks_placement="Center">
  <title><text>Surgeon</text></title>
  <labels rotation="90"/>
  </x_axis>
  </axes>
  </chart_settings>
  <data_plot_settings default_series_type="Bar">
  <bar_series>
  <tooltip_settings enabled="True">
  <format>
  {%SeriesName}{numDecimals:2,thousandsSeparator:}
  {%YValue}{numDecimals:2}%
  </format>
  </tooltip_settings>
  <bar_style>
  <states>
  <normal>
  <fill color="%Color"/>
  <border color="DarkColor(%Color)" thickness="1"/>
  </normal>
  <hover>
  <fill color="LightColor(%Color)"/>
  <border thickness="2"/>
  </hover>
  </states>
  </bar_style>
  </bar_series>
  </data_plot_settings>
  #DATA#
  </chart>
  </charts>
  </anychart>

  Please help me solve this problem

  Hello

  100 columns lots of columns. I understand why you are having this problem. I think you have two options here:

  First of all, you can use a chart scrolling.
  your part x axis custom XML might look like:

  Second, you can reduce the size of the font of the labels on the x-axis to a very small number, so that the text of the label is no wider than the column width. With 100 columns, you're talking probably about a terribly small font size, probably making it unreadable.

  your part x axis custom XML might look like:

  Austin

  Published by: AustinJ on February 11, 2011 11:13 - corrected typos

• CP4525 colors not aligned

  Good day everyone, need some help with this machine.  Customer provided that the colors are not aligned and looking at it, they are indeed correct.  Yellow is about 1 mm wide at the side of the rest of the colors, the magenta is also misaligned, but to a much lesser degree.  The client stated that they had already changed the cartridges of toner without effect, but I did so as well to make sure, and there is no change.  I performed the procedures "calibrate full now ' and ' calibrate fast now" several times, especially after changing parts without change.  I changed the belt of ITB, the DC controller and the scanner unit laser and none of these changes have solved the problem.  At this point I don't know what direction to take to solve the problem.  It does not appear that this machine has the ability to align the colors manually, because everything is done during calibration and make calibration makes no changes at all.  Thanks for any ideas or help them.

  I really don't know what to tell you.  Here's something that you can try at your own risk.  I don't know if your model has this procedure, but the cp3505 had what to call that a dc controller reset procedure that was not documented but solve some strange problems with this printer.  Maybe yours is the same.  In the back is a little hole where stick you something small for an engine test which is just a leaf with lines of all colors.  On the cp3505 if you placed something in the hole you would do a test engine, but simply applied the pressue and at the same time turned on the power to the printer and continued to hold until the printer is delivered to the loan it would reset the dc controller.  Maybe worth a try.  Is attached a picture with the location of the engine test switch.

• HP Color LaserJet CP1518ni - COLORS NOT ALIGNED

  Has anyone solved this ridiculous question, where all the colors are not aligned when printed?  Black text prints perfectly. But when the printing of the images, the colors are not aligned. Question lasts for months and YES I did the following:

  1. Calibrated thousand times
  2. Restored the default printer 1000 x
  3. Lost my money and has spent nearly $200 on OEM all color cartridges 4... lost!
  4. The drivers reinstalled 1000 x
  5. Have the most up-to-date drivers... believe me.
  6. Ran the printing software HP and doctor Scan and it shows me NO QUESTIONS... ridiculous
  7. Checked the Forum from HP Support with no resolution... I'm with you other people with this same issue. HP HELP PLEASE!
  8. Please tell me that it is a HARDWARE PROBLEM! Of course you won't admit it.
  9. Same problem occurs on my PC - Win 7, Macbook... does not matter... it's the printer!
  10. And finally, I posted this plea for HELP!

  Thank you HP.

  What it sounds like, it's a hardware problem. I would like to begin by ensuring that you have the firmware updated. The firmware of the printer, is what determines how the mechanics of the printer will act. If it has expired, it can cause all sorts of problems. If this does not work, try to do a hard reset. I've included a link to the firmware and instructions for a hard reset below. Let me know what happens.
  
  Firmware:
  http://goo.GL/gCXvr
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• New black cartridge do not align

  I have a HP laptop and my printer is a HP EnVY 4500 e-all-in-one-series.

  I installed a new black cartridge Ref. HP61. The printer will scan, but the alignment fails. This is a new printer. I had an old HP printer that does the same thing. That's why I bought thinking it was the HP ENVY printer.

  Thus, the new cartridge, new printer, same problem, will not align the scanned map.

  All answers >

  Hi @671,

  Welcome to the Forums of HP Support!

  I see that your new HP Envy 4500 printer is stuck on the alignment process. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrated you must try to get the printer working, I will help the best I can.

  What looks like the alignment sheet?

  Missing colors?

  I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
  • Remove and reinsert the ink cartridges.
  • Load white letters unused, plain or paper of A4 format with a brightness level of at least 85 on the set.

  If the problem persists, I would try the steps in this guide, an "alignment failed" Error Message is displayed on the control panel.

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• Reference Dell v305 problem black cartridge not aligned

  my printer dell 305 said all of a sudden the black cartridge is not aligned properly (otherwise it is said to remove the Strip). If I take the cartridge and reinsert it, I get the same message. If my printer is broken or do I have to just buy a new cartridge?

  scs822,

  Do you use Dell Series 9 ink cartridges?

  If you unplug the printer from the wall and remove the brick of power for 60 seconds, this will reset the error messages that the printer. I would then plug everything back in.

  Turn on the printer.

  Open the printer (power on) and remove the Dell Series 9 black cartridge and then reinstall it. I then remove the Dell Series 9 color cartridge and reinstall it. Now, close the printer, and it will print an alignment page.

  Error messages?

  Print Cartridge black = Black (left) cartridge = color (right side)

  photo cartridge = cartridge black (left side) = color (right side)

  Dell Series 9 ink cartridges have a sensor to them that cannot be reset. Article on Dell ink cartridges filling.

  Dell Series 9 ink cartridges can be purchased at Staples, Wal-Mart or any Dell website.

  It is possible to get an ink cartridge Dell Series 9 with a bad sensor. I would take these to the place of purchase for a replacement.

  Rick

• the desktop icons and labels are not transparent

  the desktop icons and labels are not transparent

  Hello

  · Were there any changes made on the computer before the show?

  You can check out the post below which deals on the same concern: http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

• Want 5530 printer will not align properly

  Hello

  I had to change my black cartridge in my printer HP Envy 5530.  Alignment printed document, I noticed that the color cartridge should also be replaced if I interrupted the process (this may have been a bad idea) and installed a new color cartridge.  When the process is restarted, correct alignment of printed document, but when I put it on the glass in order to complete the process, alignment failed.  It appeared that the document could not be read, and I received a message about the configuration of the cartridges to 'default' all that meant.

  Then I went to copy a document (in black) and, to my surprise, it came out white.  It seemed that the alignment document could not be read.  I thought that the scanner have been damaged, but I was able to scan documents.  I was able to print, but the quality was poor.

  I tried the following without result:

  1 removed the cartridges and Redid the alignment process.

  2 unplug the printer and Redid the alignment process.

  3. reinstall the printer.

  4 Ran own process of heads and repeat the alignment.

  5 etc.

  I discover that the system copy so I used the color option.

  I'd appreciate the help.

  Thank you.

  Badger66

  Hello Badger66,

  Welcome to the HP Forums!

  I understand that your craving for 5530 will not align correctly. I will do my best to help you! I want to thank you for providing such a detailed post. Please make sure that the printer is connected to a live wall, not a surge protector. Then, please follow these steps in order:

  Remove all printer ink cartridges, and then close the door
  Remove the power cord from the printer (do not press the power button)
  Wait for 60 seconds or more, then reconnect the power cord to the
  Wait for the printer to turn completely, and then install ink cartridges
  Try printing another alignment

  Please let me know if this page has been accepted or not. I will seek forward to hearing from you.

  Have a good night!

• My HP 2410 printer will not align.

  Printer will not align. Error message States. No more paper. Then the printer jam. Then print canceled., but the printer prints a job and test print page. All other withdraws. I can't copy or fax until the print head. Help, please. Candih

  Eleanor that rock you!

• Eprint HP3050A does not

  Hi I have installed my printer HP 3050 has.

  Printer is connected to the network and working properly using print wirelessly from local computers.

  Ipad AirPrint works.

  I can not connect to the printer using its local IP address.

  I was not able to get printing to work.

  Light of the printer says it is connected to the eprint and gives me an email address.  I registered on the site eprint and connected my printer.  When I send jobs to the e-mail address, they appear in the list on the site, but after awhile, they say "failed".

  The printer is "Connected and ready," according to the site.

  In addition, the ability to print the config for eprint page does not either - all the config prints appear in the queue on the eprint site, but do not print.

  Any ideas?

  Thank you

  Patrick

  It's ok now, I found a document that describes how to remove and then re-enable web services and that seemed to work

• Encompassing not aligned with the object

  Hi all

  I've been using Illustrator CS6 and during the transition to the 2015.3 CC I had the following problem: when I create an object, it's bounding box does not align, it is impossible to turn the object easily. I suspected, I just pressed accidentally a few keyboard shortcuts, but reset settings and even move the file didn't help. I looked all over the forums, but it seems that only a few people experience the same problem, and their questions remain unanswered I will be very grateful for any advice how to solve this problem, because I come to CS6 because of this problem. Thank you very much!

  

  Object > shape > expand shape

  Context menu click object > transform > reset Bounding box