EPrint with Photosmart B110a

Photosmart printer B110a

Use eprint for first time

All other functions of the printer are working but NO impression of the email sent to hpeprint

My e-mail sent by hpeprint

Thank you for using the HP ePrint service. Your print job has
received and prepared for printing. If you are the account holder for the
printer, you can check the status of your print job to http://www.hpeprintcenter.com.

Hpeprint Center

Failed "Fw: Mail delivery failed: message back to sen.

So what's happening?

Thanks for the reply. It seems you are right. I tried with my ntlworld.com email address and it worked OK printer

Another puzzle solved

.

Tags: HP Printers

Similar Questions

  • Photosmart B110a: eprint problems after Windows upgrade 10

    The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

    Any notice received with gratitude.

    Hello @Ticfan,

    Welcome to the HP support forums.

    I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

    The first thing I want to address is the "ePrint + Jetadvantage".

    It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

    The following link will take you to the correct driver.

    You can select 64 or 32 bits depending on your operating system.

    HP ePrint Software

    I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

  • You can eprint with the droid bionic unit hp photosmart plu

    You can eprint with the droid bionic unit hp photosmart plu

    Hi, QB

    Yes, need to go to the market Andriod and download HP ePrint home & Biz app.

  • Can I use a cartridge with extra flat 564 black ' photo' in a HP Photosmart B110a? Perth, Australia

    Can I use a cartridge with extra flat 564 black ' photo' in a HP Photosmart B110a? Perth, Australia

    No, you can't use a Photo cartridge instead a black cartridge. Photo black and black are not the same and that they are not interchangeable. Here a link to a document that I site the prior statement which also goes to explain why the photo cartridges have been renamed and the differences in the picture and Black cartridges. I hope this helps.

  • Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

    Hi all

    I just spent half a day to set up my new printer wireless HP Photosmart B110a. (CN245B)

    He luckily easy, but ultimately all the software is installed on two computers and printer is wireless connected to the router on my home network. Printing, ePrint, scanning everything works fine.

    With the exception of this problem: I turned off the printer using the power and she handed over after 10 minutes. I've done several times, and when turned on, every time the printer wonder if I want to configure the wireless connection. If I click on Yes, then he begins the wizzard - wireless and the password must be entered again etc. If I click on no, then the printer just starts and runs very well. It seems that he does not lose the connection settings.

    Whenever I turn on the printer with the button, it is from the wireless configuration wizard. Is this a bug?

    How can it be solved?

    Thank you

    Smartyx.

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP address of the router to the bridge and the first DNS entry.  Let the second white.

    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • Photosmart B110A black does not print

    Hi, I have a photosmart B110A and black stopped printing.  Was working fine before this problem.

    A lot of ink but I have replace the cartridge with a new one and same problem.  A ran all alignment head cleaning tests, etc. Reinstall the cartridge.  Clean the vent on the top of the cartridge.  Powered on.  Still nothing.

    Is there a solution to this problem?

    Hi Ciara

    Thank you very much, this seems to have solved the problem.  Although I have consumed a lot of ink there are now no remains in the cartridges that I will need to replace before I can be 100%

    Thanks again

  • all-in-one photosmart B110a: windows 10 and b110a

    I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

    Hello @Jenecessary,

    Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

    Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

    If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

    Please let me know the results, I'll watch for your reply.

    Thank you

  • Photosmart B110A: Photosmart B110A - missing HP Support Assistant.msi

    Hello

    I use Windows 10 and I just installed the latest

    version of the software for Photosmart B110A

    from scratch.

    The software always tells me that it is missing

    the file Assistant.msi of taking in charge of HP.

    It says Error 1706, and something about a bad resource.

    I don't know where to find the file or how to

    solve the problem.

    Kind regards
    Martin

    Hi @mploug,

    Welcome to the HP Forums!

    I understand that you are missing the file HP Support Assistant.msi for your HP Photosmart B110A, on the operating system Windows 10. I'm happy to help you!

    Please, try the following steps:

    1. Close the window to locate the file with the message "Error 1706", if you don't have already done.
  • How can I disable wireless on Photosmart B110a?

    I had a lot of intermittent problems with the Wi - Fi on my Photosmart B110a, but the USB connection is perfectly OK. I had a few printintouts on my printer from a neiighbour, those unwanted. Please tell us how to completely disable my wireless connection. Thank you, Bill.

    Windows7 64bitAcer ' aspir ' 5732Z

    There is an option to disable the card wireless in the printer.

    * Press the key for the Setup Menu on the front panel of the printer

    * Select the submenu wireless

    * Under this menu is an option to turn on/off wireless.

    I hope this helps.

  • Cartridge for HP Photosmart B110a to the Brazil?

    Hello everyone, I have a HP Photosmart B110a, I bought in Germany, where I used to live. Now I am back in the Brazil and do not find the cartridge HP 364. Y at - it an equivalent cartridge that I could use with this printer and sold in my country? Thank you for the attention.

    Hello

    Compatible cartridge for the Brazil's HP 564. Given that you have moved to a different printer area will not accept the new cartridge immediately, please contact HP to get a regionalization reset after which the printer accepts the new cartridges.

  • How can I Poster Print with photosmart 7520

    I am a poster and I used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How can I post print with photosmart 7520 use eprint and if not what can I use use the USB cord for poster printing?

    The steps are quite the same, next to another step in the dialog box:

    1. Of devices and printers, click Add printer, and then select a local printer.
    2. Keep the preseleted port LPT amd click on next.
    3. Select HP from the component manufacturer, and then select the HP Deskjet 6940 series in the list of printers.
      Note: If the model is not listed, click the Windows Update button, let several minutes to complete, then it should be listed.
    4. Complete the wizard and confirm the changes.
    5. A newly added the 6940 right-click and select printer properties, open the ports tab and select the port with the printer otiginal model listed in the column of the printer (HP Photosmart 7520 for example), and then click OK.
    6. Poster printing should now be available in the tab of finishing (under Pages per sheet) and posters using the HP Deskjet 6940 printer.

    Please let me know of any questions,

    Shlomi

  • Two HP Photosmart B110A printers but just a watch onscreen HP Solutions

    I have two printers Photosmart B110A in different places. Does not show that I just installed on the screen on my laptop (Windows 7) HP solutions Center.  All I can see is the former.  Any ideas? The printer is connected to the network and installed on the laptop.  I have NOT reinstalled the software (i.e., I did insert the CD supplied with the newest printer) fear that it overwrites the original and I lose the connection with the first.

    Any ideas? The screen of the HP Solution Center can handle two identical printers?

    Thanks ciccarelli - all sorted now.  A little research showed me that the screen of HP solutions will indeed two or more printers that appear as tabs on the left.  I loaded the CD that came with the new printer and my fears of crushing the first were unfounded.  I now have a tab for each printer on the screen of HP solutions.  Well done HP and thank you once again, ciccarelli.

  • Photosmart B110a yellow ink went Brown (HP364 cartridge)

    On December 24, 2013, I replaced all three colors HP364 ink cartridges in my Photosmart B110a as they were exhausted. (The black cartridge didn't need of replacement). Today (21 January 2014) I noticed that the colors were bad printing; a race of 'print quality' showed that the reason was that the yellow cartridge, while always 75-80% full, was in fact the Golden impression. The withdrawal of the yellow cartridge, I noticed that the stamp was no longer a yellow/orange color, but was in fact a darker tan/brown color. A 364 yellow replacement cartridge and a clean print head have solved the problem, but I would like to know four things:

    1. Is this a common problem? The guy where I bought the replacement cartridge said he had heard of that happens (specifically with yellow HP cartridges and specifically 'Brown printing') front.
    2. Is he likely to damage my printer permanently? Is the oxidation or whatever it is the yellow ink that is likely to cause damage to the print head itself?
    3. If it still happens once can I claim for a warranty replacement cartridge (and if it does not damage the printer at all times can I claim repair/replacement of the printer under warranty although the printer itself, which works perfectly, is no longer under warranty?)
    4. The printer is slightly used. I can avoid this by making a color print (of anything, even a page "print quality") at regular intervals? If so, what type of interval? And if that's the case could it be documented somewhere?

    It is a 'real' HP 364 cartridge (supplied by Argos to the United Kingdom, manufactured in Czech Republic and with a warranty date in 2015), not OEM, not recycled, either said in passing.

    Hello tonyinselby,

    Welcome to the HP Forums!

    I am pleased to learn that you have been able to get the problem solved.

    1. it is very difficult to say whether this is a 'common' problem with the yellow HP364 cartridge. Without the complete troubleshooting with the cartridge, I can't tell what the more precisely caused the problem. Sometimes Yes, like all other products, some have flaws.

    2. no is not likely to cause damage to the print head, you are able to use the yellow replacement cartridge.

    3. According to the guarantee of the cartridge, and the printer warranty. It is possible to have the cartridge, printer or replaced. To do this well you will have to contact HP Support at the time of the question, because I can't guarantee what options are available to you.

    4. with printing in color at certain intervals, this can help with the print quality, as the ink is not just sitting there. Keep in mind also that your printer does its own maintenance as long as it stays on. You can also run a cleaning print head to properly maintain the printer.

    I hope that this answers your questions .

    Thank you.

  • Photosmart B110a does not print another property

    I replaced the cartridges of color with authentic products on my Photosmart B110a.  Until then it worked perfectly.  Now it prints shocking images of color in pastels.  Does not print black which is 3/4 full.  I use a Mac.  I powered by printing, computer, uninstalled and reinstalled and still no luck.

    Test pages print works and the colors appear.  I cleaned the print heads.  I have re-aligned heads too.  Help, please!

    Hi Deelesley, don't know what fixed it but glad to hear it of good feeling back for you.

    FYI, if you have problems again the link below has a lot of support documents & troubleshooting for PS b110a

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&CC=IE&DLC=en&LC=en&product=4022343&tmp_track_link=ot_search

    Ciara

  • HP PhotoSmart b110a stops at halfway printing

    When printing from Windows 7 for HP Photosmart b110a cable, the printer starts normally but pauzes at halfway. Nothing happens for minutes, and then he throws the paper and gets a new. Then again, but stops at halfway. Same thing.

    When printing wireless smartphone Android or Ipad I have no problem at all, so the problem is not in the printer I think.
    I already reinstalled complete driver. And the critical update installed on HP site...
    Please help, thx for the Netherlands,
    Steven

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    HP - Photosmart Wireless e-All-in-One Printer B110a - Software & Driver Downloads
    <- set="" to="" your="" vesion="" of="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP - Photosmart Wireless e-All-in-One Printer B110a - Support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably still the drivers but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • Weird sound issue on the Satellite P25-S507

    For awhile, my sound went on and off. Sometimes I'll start my computer up, and the sound does not illuminate. Sometimes I play a movie or a song, and then the sound will be distorted or just turns off. Can someone help me to fix my sound problem?Jcar

  • Deleting the files corrupted in the recycled folder

    I am running Windows XP and I have tried to run the defrag program.  The program will not work until the end because of corrupted files (4) in the recycled folder.  I can view the list of files by going to the command prompt, but no action that I hav

  • Upgrade XP32 bit XP64 bit.

    I just bought a new gaming platform and loaded my 32-bit windows xp, to find that the 32 bit will recognize a little over 3 GB of my 8 GB of ram, so I was wondering if there is any way to upgrade my 32 bit version for the 64-bit version, or if im stu

  • XP shows the MESSAGE about how to start, but then stops at a black screen with cursor

    Today, instead of start normally, my Dell displays the usual POST screen, then a black screen with a cursor blinking (dash). He is not following the XP splash screen. After the machine is turned off and restarting, I pressed F2 repeatedly and eventua

  • ProBook 6470b: turn on my user account control

    How can I activate my user account control