Equium A110 and digital projectors

With the help of Equim A110 with Epsom digital projector. Just get blue screen, no signal. Tried searching for source on the projector, but nothing. How can I get laptop to configure with projector?

Thank you

Hello

Wait do you have a Blue Screen of Death or only images not displayed via projector
Have you tried using the FN + F5?

Tags: Toshiba

Similar Questions

  • Equium A110 cooling fan coming ON and OFF very often

    I just bought a new Equium A110 and fan comes and goes off very often. Web, I go to a favorite in my browser, the fan lights while the page is loading and then turns off when it has been loaded and lights up also I scroll to the bottom of the page using the scroll wheel of the mouse. Is this normal?
    Is there anyway that I can reduce this fan on / off?

    Thank you
    Chris

    Hello

    I assume that there is not much to do. I have new Satellite L100 and there is the same situation. In any case try to reduce the cooling method option in power management.

  • Equium A110-233 bad sound quality

    Hi all, please can someone help,

    I recently bought a satellite A110-233 and the sound quality is terrible (I am aware that there is a conrtol of volume on the front of the laptop until someone asks ;-))

    I played around with all the settings including the Tru-Surround options and via the internal speaker volume level is very low, even though unfortunately this isn't my main concern. The main reason I bought the laptop was to use as the source for the reading of the media through my Hi-Fi and TV channel. When I connect to my stereo using a socket type of headphone 3.5 mm headphone output on decision-making for the twin RCA inputs on my system audio is absolutely appalling. The volume is very low and there is no depth to the sound and absolutely NOT that it's low.

    I tried to play the same files on the other half cell and the output is absolutely fine.

    I tried to download a new copy of the audio driver and install that. I also tried a full format of the laptop and reinstall windows from zero (not from the appropriate disk recovery, but since the windows CD), still no joy.

    Please please can someone help me because I can't use my system for what I bought it for!

    Thank you all

    Hello

    Hmmm, I'm not an owner Equium A110 and so I can't give you a professional opinion on this problem.
    For me it is not easy to tell if it is a hardware/software problem, or if it is simply a sound quality.

    In any case... I noticed several discussions here in the forum about bass on laptops Satellite A100 and a person has provided a solution.

    According to several messages try to delete or to rename the files RTHDAEQ0. DAT and RTHDAEQ1. DAT.
    You should find these files in the C:\Windows\System32\Drivers\ folder

    But it is a solution of A100 series and I don't know if it helps on an A110.
    However, test it and please report results... It is interesting to me

    Please also check this thread
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720&start=0

  • Equium A110-233 dead but flashing

    Can someone please help?

    I have an Equium A110 and are about 2 weeks it just will not turn on. He died, but for the blue LED flashes quickly when power is applied.
    Any ideas?

    Hello

    Remove the battery and unplug the AC adapter from the laptop for about 20-30 min.
    After this short period of time between both parties and try to turn on the machine.
    If your device is not fuel, the problem must be related to a serious hardware problem. I think that any malfunction of the motherboard.

    The fault of the mobo might be the worst case because the motherboard is one expensive notebooks parts and repair or replacement would be a costly affair.

    But maybe your warranty is valid and in this case, the warranty would cover all hardware replacements.

  • Equium A110 - wireless connection loss

    Hi all
    can you help me?

    I lost the connection on my Equium A110 and also an another laptop (Toshiba no) it askes for or an incorrect IP address.

    I have a linksys router that took her to date filmware

    Hello

    For me it s definitely not a laptop issue because on other cell phones, you have a problem with the Wi - Fi connection too.
    It s not that easy to tell what the reason is for this

    In your case I would try the command line the command ipconfig / renew
    It work?

    If it doesn't work you should try unplugging the router of the adapter AC/DC for at least 5 minutes. Then plug back the AC/DC adapter and try it.

    Good luck!

  • Equium A110: SVID to Composit - output black and white

    I recently bought a Toshiba Satellite A110 and I tried to put it out to a TV
    the problem is that svid to svid is fine and colour however svid to composit (which is what I need) is black and white, I tried all the settings without result, I think it has something to do with the settings of the tv are on 60 Hz in properties but I can't change the
    I downloaded the latest drivers 945GM, who has not remedied the problem someone at - it ideas of what to try next.

    Can you please tell what cable do you use? Maybe a 4-prong cable?
    I read on some sites that a cheap 4 pin cables could be a reason for a black and white TV. Try a 7 wire pins. Maybe it helps.

    But as a first step, you should also check the PAL/NTSC settings.
    You should also check this site on different connections
    http://www.michaeldvd.com.au/articles/VideoConnectors/VideoConnectors.asp

    PS: I n t think 60 Hz setting is responsible for the black and white problem.

  • Equium A110 - boot in the BIOS

    Hi all

    I recently encountered a problem with my * Equium A110-233 * portable. This laptop was in a closet for a year or two after that a friend of a friend connected a digital camera to transfer pictures laptop whereapon turns off quickly. It was an instant power off as I said. The laptop wouldn't start after that, in fact he showed no response at all.

    Now, I have pulled out of the Cabinet and plugged the power cord for a dip and see if I got lucky. To my amazement it started after a bit of charge. I re - formatted and reinstalled windows XP with SP3. The laptop starts for two days with no problems but has now ceased to behave.

    The problem I have is this: what power the laptop up posts, but then goes directly into the bios every time. He did this several times on and outside and I thought nothing of him, as it would eventualy support windows XP after the reboot. But now he simply refuses to do anything other than go straight into the wood to the power upward.
    I've updated / flashed the bios after installing XP innitialy. I have no idea as to what may be the problem. Here's what I've checked so far:

    RAM - checked and working properly.
    HDD - working properly.
    Battery - offers power when out of AC.
    The power supply provides the power such that is light on laptop.

    Any ideas would be accepted with gratitude.

    Thank you.

    Hmm maybe the RCT/BIOS battery is empty?  :|
    This could be possible because the laptop did not serve any longer.
    In order to recharge the BISO battery the laptop must be connected to the power adapter and should be turned on. The battery should charge for 24 hours.

    Of course, it could be a motherboard problem which would explain the permeable problems

  • Equium A110-252: I can not all channels with V-GEAR MobiDTV

    Hello.

    I have Toshiba Equium A110-252 and I just bought the MobiDTV of V - GEAR, but I'm not all channels. Do
    do anyone know if this phone has good software/hardware that is necessary.
    Hope someone can answer this for me.

    Thank you

    Hello

    This is not a Toshiba device and in this case the best way is to contact the manufacture of the device.
    In your case, I recommend to visit this site:
    http://vgear.com/products/list.asp?ProdID=AMVG1-016-002

    However, I guess this tuner should receive digital signals.
    I put t know where you live, but to my knowledge the digital TV is not available everywhere. Digital signals must be strong enough to receive television channels.

  • Need for Equium A110-147 mass storage controller

    Hello. I have a satellite A110-147 running windows7 ultimate with 2 GB of ram and a 500 g hard drive.

    In other devices in Device Manager, I learned that my mass storage controller drivers are not installed. When I try to update the drivers, I am told that drivers could not be found on my computer or on the web.

    I would apreciate to help on that if possible please.

    Hey,.

    If you n t post the seller and IDENTIFICATION of the device it is difficult to say which driver you need

    Theoretically, mass storage controller could be linked to the internal card reader module. You can download it from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com

    But I think that you must find for the Vista drivers as Equium A110 doesn t supports Windows 7, Vista only.
    And you must search in * Archives * driver download page because it s an older model. ;)

  • A60: dvd shows black screen through digital projector

    Hello.

    Our school has purchased a large number of laptops A60, that teachers plan to use in conjunction with our digital projectors Sanyo. However it was discovered that, while the office and DVD controls, display etc. on the whiteboard with success, the real DVD appears simply as a black screen. We have updated graphics drivers, you press fn & f5, etc, but can't find any way to get the images to show through the projector. We have no problem with other laptops to school.

    Help much appreciated on an urgent basis.

    Thank you.

    Buzz

    [Edited by: admin 8 June 05 20:53]

    Hello

    If I understand right you want to start the movie on DVD and watch it using the projector. Am I wrong?

    I guess you use preinstalled DVD player, called WinDVD. If Yes please try starting your laptop, change the external device (projector) using the FN + F5 key combination. If this happens successfully, then you should try to start the WinDVD player. If you want to change the display using FN keys, while the DVD player works it is possible that there is not any screen success only in black.

    Good bye

  • Need for a disk recovery for Equium A110-252 (model PSAB2E)

    Can someone point me in the direction to get a Toshiba Equium - A110 - 252 Lap Top recovery disk?
    Or if someone has such a drive. I appreciate a loan - or - buy from them! Thank you

    Mostyn

    This satellite is the old model of laptop and I believe that you can not order a copy on https://backupmedia.toshiba.eu/landing.aspx
    But you can try to contact the nearest Toshiba authorized provider and ask if they can help.

    Otherwise, you can install OS using Microsoft facilities drive. All the necessary drivers, tools and utilities that you can download at Toshiba supports the page.

  • Connection digital projector for laptop Satellite 1000

    I would like to help please by connecting my Satellite 1000 to
    a digital projector to make a Power Point presentation.
    I use other laptops to work and am quite familiar with the process. However, I could not the 1000 to work.
    I have connected using the blue monitor port and tried to select RGB using Fn + F5, but as a first step, nothing is displayed on the projection screen - no rocking. Finally, my laptop screen is displayed on the screen, but not on the laptop, which completely freezes.
    Any ideas would be very appreciated.

    Hello

    You must uninstall your display driver and download/install a new driver from
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    The Driver Downloads you will find all the drivers for your laptop

    Also check the comments
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3386&MessageID=10462#10462

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5531&MessageID=19777#19777

  • Equium A110-252 gel in win 7

    Hi I have a big big problem with my laptop which is Equium A110-252.

    I installed win7 and I tried to install all compatible drivers, only those who say win 7 x 32, however my laptop keeps freezing at random times and I don't know why.

    I didn't have this problem with win xp, can someone help me please, I really want to win 7 to work because it is much faster than xp.

    Please help me

    Hello!

    I doubt that Windows 7 is faster then XP. I also tried Windows 7 RTM and I must say it s faster then Vista but I think XP is still the fastest operating system.

    However, if your laptop crashes in Windows 7, you must use the preinstalled operating system which I think is XP. I mean Windows 7 isn't on the market yet and I doubt that enough old Equium A110 will support Windows 7.

    What you can do is to clean the laptop using a jet of compressed air because maybe it s an overheating.

    But I think that s all you can do.

    Good bye

  • Equium A110: Cannot use LAN after wake up from hibernation or standby

    Hi guys

    I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

    Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

    Please help me.

    Thank you

    Hello

    Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

    Also found this possibility. I put t know if it will help but try it.
    1. go to [start]-> [Control Panel]-> select [System]
    2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
    3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
    4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
    5. Press [OK] to close the dialog box.

  • Equium A110 - how to connect to PowerMac?

    Hello

    I'm trying to connect a laptop Equium A110 (XP Home Edition) to a 7500/100 MHZ PowerMac (o/s 7.6.1) to descend mainly photographic files.

    I need to be able to share files via a connecting cable Cat5e Crossover, which I said must connect to a PC, Mac to Mac, and in this case Toshiba PC on Mac. Is this possible?

    At a certain level of basic, the PC seem to see the Mac (in trunk of LAN - except if it means some migration authorization Code any?) but I can't get a physical connection that allows you to transfer files. The original seller of cable and Belkin have been no help whatsoever!

    I think that should be a computer server (most recent laptop?) and the Mac of a customer?

    I got a lot of people saying: 'it should be possible. "

    Miss a software or drivers in order to make a connection with success or have I missed turning a setting somewhere?

    I relaxed potentially conflicting software while trying to achieve this goal.

    TIA.

    JimJam

    Hi jimjam,.
    What do you to manufacturers so this isn't a hardware problem?
    You must do your homework!

    This is a problem that is bound to network protocols...
    what you need is a Router + 2 lan cables or a cable crossing of files, some time to read and patience...

    SMB or similar will do the job
    file-sharing rights are also required

    If you are not experienced in the network protocols, use a drive hard usb to transfer files

    use an internet search with "smb file sharing windows mac".
    I'm sure that the results give you useful answers

    BTW: the apple support site has a howto exactly for this problem
    so I won't copy and paste it here...

Maybe you are looking for