Error 1053 of the queue

Similar Questions

• How to fix: Error 1053 of the print spooler

  Are you an error when you try to restart the print spooler?  Do you have your printer spooler error and now, do not restart?

  You saw "error 1053: the service did not demand launch or control in a timely.?

  There is a page of Microsoft support with information about this error, which can be found here.

  According to Microsoft:

  • Question: The ServiceBase class calls the OnStop method directly from the Service command handler that is defined in the ScDispatcherLoop of the Advapi32.dll file. After 30 seconds, if the ScDispatcherLoop thread is not ready to receive a new order of service from service control manager, Windows brand services controller out service as 'time '. Therefore, you receive this error message.
  • Resolution: to resolve this problem, obtain the latest service pack for Microsoft .NET Framework.

  This resolution works for some, and allows the service to return to the correct functionality.  However, I want to provide workaround incase this option does not work for some.

  • Open the run command by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  • Type services.msc and press enter
  • Scroll down and double click on print spooler
  • Select the tab log
  • Uncheck the Allow service to interact with desktop
  • Click apply
  • Select the general tab for the print spooler, and then select start

  I have the confirmation that this workaround works for some users.  The link below will take you to a thread where this information has resolved this error a user in these forums:

  1053 error print spooler does not start thread

  Here is the video where the workaround steps, listed above, were found.  The video also gives a graphical representation of these steps for those who prefer the Visual instructions.

  I hope this helps users with error 1053 of print spooler.

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• HP Photosmart 7760 printer will not print, the error message in the queue

  I have Mac 10.6.8.   Printer (HP Photosmart 7760) has stopped working.  Reinstalled the drivers updated. Went through the steps including unplugging cables USB and all the other steps recommended by HP. When I press print, the document goes to the queue and and the error message is displayed. When I press the resume to print, nothing happens.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Error to the element of the queue with simulated signal, but not with the DAQ hardware

  Hello.  I get an error code 1 when I run my VI in simulation mode, which is only 3 simulate subvis signal at different frequencies.  The block diagram shows jpg file and the probe is after I stop the VI.  Note that there is an invalid refnum.  I don't know why that is.  I am also including the watch of the probe after a few iterations, there is no error on the probe 64 until I stop the VI, and also noted that there have been no queue items.  This of course means that I don't get to remove the data in loop 2.  An interesting note is that the system works fine when I run the program in data acquisition mode, which is the other case behind the 'simulate signals. "  In this case, the only thing is the DAQ assistant and dynamic data of the tunnel cable.  Everyone can't see what I could do wrong?  Thank you.

  Thanks for looking at my post.  I thought about it about five minutes ago.  I didn't have a timeout on the handeler event, so it was not double check for new items in the queue.  I don't know yet why the probe shows showes that items have not put in the queue because they certainly were.  Maybe "queue items 0" means that there are no items saved in the queue. ?

  Your concern is interesting and deserves a check...  I just ran it without registration, and it seems that the release of the case (the default) record structure is just an empty DDT, a placeholder, I guess.

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• All printing errors in the queue for a shared printer

  I have a HP6110 connected to an XP machine.  It is shared and the printer is installed on a computer vista laptop.  I could print however now each job is in the queue and then goes into an error state.  The only way I can remove the task from the queue is to restart the print spooler.

  How can I fix once and for all?

  Well, I never aspired to be certified MCSE on NT than a few computers existing except in places like Bletchley Park to crack the enigma code messages .

  Deleting the files in the folder is at the heart of the fixing of the problem if my hypothesis about your problem is correct. The problem is one of the frequently reported printer problems.

  Don't forget to tell me the version of Adobe Reader, you?

• Print to Adobe PDF format generates the PDF, but also generates an error entry in the print queue

  I am running Windows Vista Ultimate Edition and Adobe Acrobar 8.
  Whenever I print a document in PDF format, the PDF document is generated correctly.
  Unfortunately, it also generates an error entry in the Adobe PDF print queue. At each system restart Windows Live One Care detects errors and ask me to fix.

  Hello Pino Sannicolo,

  Try to check your print to the printer settings. Right-click on the printer, and then click Properties. Click the Advanced tab and then click on "print directly to printer". Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1053 while trying to start the police Cache Service Windows.

  original title: Windows Font Cache Service does not start

  When I turn on my computer Service of police Cache Windwos is stuck on startup so that it uses 25% of my cycles constently cpu. If I end the svchost.exe behind it then try and start it myself that I get error 1053 so vertually I have no control over the service at all I can not try to stop it restart, pause, or resume. I can disable so it does not even start when I turn on my computer and it helps, but the service should start and stop easily.

  I changed it to automatic (delayed start) and it started right at the top!

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I'm having problems with error 1053 (print spooler) message in Windows 7 and no solutions seem to work. There the up todate solutions/suggestions out there? Dave

  I keep losing the connection to my printer.

  I get the need to resume the spooler error message. Then, I get error 1053.

  I tried various fixes suggested, but nothing works.

  Any help out there!

  Dave.

  See http://support.microsoft.com/kb/2793718/en-us

  Use the 'light ' first FixIt mode.

  If the lighting mode does not work, use the full mode - but you will then need to reinstall your printer:

  The mode light will change the spooler that should not require the user to make changes. The full mode will restore the spooler to print to the default settings and require a reinstall of drivers for printing and printers.  All applications must be stopped before running the difficulty it Solution.

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• Photosmart 2610 usb connected stops printing in the queue; error noted. IMac os 10.6.8. prints test page

  I used all-in-one HP Photosmart 2610 for years without change. Now everything is print spooling with non-descript "error" when it is in the queue. I can print the test page for the utility and I can print via the usb connection to my laptop which has supposedly the same software and updates. I uninstalled and reloaded the software updated and get a message that the software has been installed successfully. Install HP works OK and the dashboard widgit working to show supplies. But the printer in the printer/Fax preferences poster "information not available" when I check for supply levels.

  When I try to use the printer utility I get a message "some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device cannot be accessed ".» I downloaded the latest version of the software and reinstalled my original software CD and cannot always my computer to print.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.