Error analysis on Officejet 4500 G510a-f

Similar Questions

• OfficeJet 4500 G510a: problems to print to HP Officejet 4500 G510a

  Hello.  I have a printer HP Officejet 4500 G510a, connected to a pc Windows 7 Dell.  I serve these together for a long time, including yesterday.  Today, it was as if the pc could not 'see' the printer.  I hit the print command, and nothing would happen.  No print jobs showed in the queue.  I re-installed the printer, re-downloaded and installed the driver printer and checked the cable.  After all this, I get a different message.  After hitting the print command, the work shows in the print queue, but with an error (no error code).  Nothing prints.  I had visitors in the home for the holidays, which could use the pc in the course of the past 24 hours, even though I doubt any of them would have done something fundamental for the parameters.  Advice would be appreciated; Thank you.

  Hello! Welcome to the @RedRaven forums

  I read your post on how you can no longer print to your Officejet 4500 G510a. I have some ideas for you, that might help!

  First make a copy of the printer, it is a hardware test to see if the printer is correct. If it copies, it's a great sign. Please let me know the results.

  On the computer, run the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please let me know these results as well and even include a page if possible.

  You mentioned that you have checked the cable. You connect the printer with a USB or Ethernet cable?

  I hope to hear from you, have a nice day

• OfficeJet 4500 G510a-f all-in-one

  I'm running Windows7 and my printer is a HP Officejet 4500 G510a-f. When I turn on the printer carriage slams printer side repeatedly and when it stops my screen says there is a paper jam, but there is none. I went through the troubleshooting solutions, nothing helps. Someone knows how to fix this?

  Hi michaelk24,

  Thanks for the reply!

   

  At this point, I think it's a hardware problem with the printer that we will not be able to resolve through troubleshooting. I suggest that you call HP Technical Support for your area and inquire about trade and trade program.

  I hope you have a great weekend!

• Error while parsing - Officejet 4500 g510g-m

  I have Officejet 4500 g510g-m connected by USB to a Toshiba laptop that is running Windows 7.

  I got and error message "software HP is perhaps not able to scan the destination by default because the software is not available or does not work properly. When a scan of the printer is done using HP diagnostic every thing works fine if I get this error message.

  Over time I got the impression that I uninstalled the printer several times and reinstalled, this time when I always get the error scan and sometimes an other error message with error numbers 8, reinstalled [(6,0,-2417319779)] tells me to reinstall the software.

  I wonder if the problem with Windows updates. Between updates of Windows I can usually correct the error messages and the printer scanner works fine. This time, I can't solve the problem.

  trishred, good for a later use HP made all our software and drivers available through our Web site. Just save the link below and if you need to reinstall the printer on this computer or another just select your operating system and follow the download instructions.

  http://goo.GL/d0mVS

  I am happy that this solved!

• OfficeJet 4500 G510a

  I downloaded the last software package on the site of HP for Windows 8 for the OfficeJet 4500. I ran the software and I can print successfully. However, the solution Center says that the installation was not complete. When I try to add a device, I am invited to connect the printer to the computer via a USB cable. I'm doing this, but the following button is never enabled. At this stage, I can only put an end to the installation via the Task Manager.

  Any ideas?

  Thank you

  By comparing the printer that you said that you have, the G510a does, it allows to print wireless, the software could not find the printer, I think I found the problem.

  The G510a isn't a printer wireless, or Ethernet, it is only USB. The software that you use is correct if you install the G510a, but it will not be installed with the other printers of the series.

  I would like to you, uninstall the installed printer software for the G510a. Once that is done, install using the Printer Wizard.

  Printer Installation Wizard will locate your Officejet via its network connection, go online and download the correct software.

  I hope this works.

• Error message on Officejet 4500

  Hello! I recently bought a HP Officejet all-in-one desktop computer 4500 I linked to my ADSL Modem Router. MY computers are all on Windows 7.

  Last month, the quality of all printed material became faded. At the same time, a message began to show on the display of the Officejet. This message reads as follows:

  "[Black] printer ink cartridge problem. See the product documentation to solve the problems. »

  Yet I don't find this kind of message when I look in the manual Officejet 4500.

  Help! Guys and girls! Can someone help me if I can solve the problem in the printer?

  Thamk you.

  Yours Sincerely,

  Beginning

  Hello beginning

  Read the following article and let me know if it solves your problem or not. Take notes of what happens during and after each step. Sometimes you can find new relevant information during the troubleshooting that helps speed up the troubleshooting process.

  "Print cartridge problem".

• OfficeJet 4500 G510a-f all-in-one charge not all software.

  The "Solution Center" and the "Toolbox" does not recognize the installed printer. I can't do a scan but I can print and copy. I did a complete uninstall and re installed from the installation CD as recommended in case of problems, but this has not fixed the problem. My OS Vista Home premium. The re install does not have charge as much as the original as it panel\uninstall control programs was 6 HP items listed and re install lists HP 2 points only.

  Hey there krd67,

  First of all, I recommend not to use the CD to reinstall. Usually the CD are outdated and will interrupt more while they are worth. I would recommend to uninstall, and then reinstall from the software/driver download pack. You can get the software here: HP Officejet full feature and driver software

  Let me know if that solves the problem.

  Thank you!

  Sean

• HP Officejet 4500 G510a.-f. Scan does not work on my new Windows 8.1, printed books

  I get an error "Runtime"!

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  I tried 4 or 5 times to download this error w/same every time.

  Hello

  I would ask you to uninstall the printer software.

  Restart the PC.

  Please, download and run the Installer printer HP www.hp.com/go/tools

   

• Adding drivers for HP Officejet 4500 Desktop G510a-f in Windows 8

  I have a desktop HP Officejet 4500 G510a-f. My computer is a gateway HDM! Windows 8 operating system. My system has a virus really bad, so I had to just remove & return to manufacturing to installation so I'm having to put all the hardware, software, and pilots back on. The only one that Im having trouble with is my all in one PRINTER! I have the HP solution for the resettlement of the printerdrivers Center. Usually when I complete, I get a message; "The system cannot find the specified file" then it gives a path: "

  C:\Users\Diana\AppData\LocalTemp\7zS7A17\Setup\hpzshl.ice_s... (Im unable to do the rest if there is no cause its in high bar section.)

  I also received another message simular:

  C:\Users\Diana\AppData\Local\7zS4B42\Setup\hpzshlautor

  Can someone help me as soon as POSSIBLE!

  Diana

  Hi Diana,
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• HP Officejet 4500 g510: HP Solution Center

  How can I install the HP SOLUTIONS CENTER's Windows 10?

  I ' not more possible ts of installation CD because there is no more the "don't install" icon but only the icon 'out '.

  Tahnk you

  [Personal information]

  Hello

  What is your HP Officejet 4500 g510? Must be g510 HP Officejet 4500* where * can be from a to z. If please download and install the following software and the driver is your printer HP Officejet 4500 g510a-f:

  http://ftp.HP.com/pub/softlib/software12/COL32500/MP-109548-2/OJ_AIO_4500_G510a-f_NonNet_Full_Win_WW_140_408-4.exe

  IF your printer is a HP Officejet 4500 g510g-m:

  http://ftp.HP.com/pub/softlib/software13/COL32438/MP-109547-3/OJ_AIO_4500_G510g-m_Full_Win_WW_140_408-5.exe

  IF your printer is HP Officejet 4500 g510n-z:

  http://ftp.HP.com/pub/softlib/software13/COL32439/MP-109545-3/OJ_AIO_4500_G510n-z_Full_Win_WW_140_408-5.exe

  Kind regards.

• OFFICEJET 4500 PRINT DOCUMENT.

  OFFICEJET 4500, G510A. HOW TO CONFIGURE THE PRINTER TO PRINT DOCUMENTS FROM MY LIBRARY WINDOWS 7.

  I will be happy to help you with your Windows 7 library printing.

  You will just need to download the drivers and software on the site or if you have a CD. Here is a link that allows you to download.

  http://WWW8.HP.com/us/en/support-drivers.html

  Click on drivers and software. Simply type your product (found at the back of the printer) number in the SEARCH bar.

  The next page will ask you for the operating system. You choose Windows 7, and then click NEXT.

  On the next page, make sure you click on the drivers and Installation of the product. Choose the FULL FEATURES and software drivers.

  "" Click the WHITE STAR left if you want to say thank YOU"

  Let me know if it helps.

• Printer Officejet 4500 won't scan on the new computer in Windows 8

  My Officejet 4500 G510a worked fine with my Windows 7 computer.  For my new computer Windows 8, I downloaded the HP driver and print and copy fine but will not scan.  It is connected by USB cable.  Windows Fax and Scan does not scan, or painted.  I uninstalled all the HP software and reinstalled twice still cannot scan. Each time, after you have reinstalled the driver, he begins to scan and hangs up with a part of the preview showing.  I received a message "HP cue scanning flow component has stopped working".  I ran HP print and scan doctor and he hangs up in the pilot audit section and will not go further. Any help would be appreciated

  Very interesting that moving to another port USB changed behavior.   You have all the other USB devices connected to the computer as well?   If so, don't remove the behavior change?

  You happen to have access to a USB 2.0 hub any?  Often if there is problems with the USB ports or the USB chipset on a system, putting a hub USB 2.0 between the device and the calculation can solve or improve connectivity.

  Jeremy

• HP Officejet 4500 Wireless: Parse error

  My Wireless HP 4500 will not my MacBook Pro analyze more. I get this error message:

  "The analysis cannot because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image. -Restart the program. -Close all programs that might be using the device. -Restart the computer. »

  I restarted the 4500 and the Mac.

  It allows to print and scan from the HP itself, just won't scan from Mac.

  Hello @Beekeeper47,

  Welcome to the forums of HP.

  I understand that you get an error message when you try to scan with your Officejet 4500.

  I would like to help.

  Try to go through the following document.

  "Another program has control of the scanner" message for printers HP all-in-one ".

  If you need further assistance or have any other questions please let me know.

• HP Officejet 4500 failure Analyzer error message.

  HP Officejet 4500 error message when turned on reads scanner failure. Impossible to scan, copy or send a fax! Printer is over 2 years old and was working fine before.

  I've included a link with some troubleshooting steps that may solve this issue for you:

  http://support.HP.com/us-en/document/c00587971

  If none of these steps resolve the problem, I would recommend the HP call to discuss upgrade options. Here is a link with directions to contact HP:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

• Question - Error Message - OfficeJet 4500 OSX 10.9.3 - HP Office G510g scanning

  "Scanner reported an error - an error occurred during communication with the scanner.

  I have search the internet looking for a solution and tried * several * suggestions. Were unable to analyze for a few months and I'm hopeful that you have the miracle cure. Sometimes, I connect on the side Mac and sometimes I reboot and log on the side (on my Mac) PC with Windows 7. It happens with two operating systems - the OfficeJet 4500 will not scan. I use Image Capture on the Mac partition. I use the scanning utility when using my Mac as a PC with Windows 7 HP. A couple of months, I have spent many hours (literally) with a HP technician (a couple of them!) and we couldn't do anything else than give an error message. New drivers do not help. Can you suggest something else? Thank you.

  Update! Shortly after this announcement (such as minutes), I saw an announcement on how to reset the scanner bar and that was the problem! I am now and scan and grateful for the greasy68 of the display. Feels so good to have my scanner back! Life is good.