error; Bleutooth cannot load battery does not
I suspect that my computer is infected or someone has the ability to view a virus of battery charger that my key presses as someone recently made a purchase online with my credit card details, I was allerted by an email from my Bank of secure payment that I had changed my password when I did not. If too much was known about me for them to get there and none of these details are brought back in my computer then there must be pressure on the keys, I did the malwarebytes scans, scans of microsoft security essentials and analysis of spyware to microsoft online more avg scans and not found any thing except regcure now im confused because microsoft said regcure
Pareto recure is a rogue security. What should I do for the best, I'm the object of research and wonder if we get an external hard drive everything save and reload windows. is it one with experience and advice would be appreciated.
Hello
See following message on security.
No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
you are, of course, that the system is clean.
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->
Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
My battery does not load after my Vista laptop off for 3 months
my battery does not load after having my laptop for 3 months
* original title - after a 3 month vacation my battery not charging *.
Hi jimycaan,
1. How are the battery once the power is discharged?
2. what happens when you try to connect the laptop to the main supply and work on it?
You can update the BIOS and see if the problem is resolved. Follow the steps mentioned in the article below.
BIOS: Frequently asked questions
Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
You can also consult the following link for more information:
Hope this information is useful.
-
Equium L20 battery does not load
I have an Equium L20 what battery does not charge. The Windows Powermanagment says he is in charge, but the percentage increases ever, I tried different batteries with the same symptom as a result.
Battery LED is orange glowing as if his load but no matter how long I leave it on charge, percentage does not change. Windows detects the battery as well with all the correct information... I tried to remove the battery, to no avail. .
Is it a software or a hardware problem?Published by: ADMIN on June 7, 2008 08:12
Hello
I also believe that it is hardware problem. There must be some problem with electronic power electronic board. Particular component? This component is placed on the motherboard, and I don't really know if you can exchange it separately.
-
Is there a settings in Win7/HP have that battery does not load until it is less than 95%
I just bought a HP Pavilion dv6 - 7043cl laptop and have noticed that the battery does not load unless it is less than 95%. I am very concercerned because I had one cell different from another company where I had battery problems. That the manufacturer was not helpful, and I will never buy their share again.
I heard good things about HP, that's why I decided to buy this particular machine. However, I've only had this machine for 3 days and now it begins. I can't find a Win 7 (I'm under Win 7 home Premium 64-bit) setting that controls when the battery starts to charge. It is a function of the HP Power Manager? Is this a feature of the ships with their computers HP laptop battery? Or is it that indicates a problem with this machine? I am a student and I need a reliable laptop for school.
Any information you can provide is greatly appreciated.
Thank you
HanNan
Hello
This feature is intended by design to reduce unnecessary charge/recharge cycles - reference for this lie in the 5th paragraph in the document below.
http://support.HP.com/us-en/document/c00287805
Kind regards
DP - K
-
Dell battery does not help load
I have a laptop Dell inspiron 1720. But the battery stopped charging. The health of the battery is normal, but it is still 3%. It says plugged in and charge but the sign of the battery will move only 4 times and then it stops! Its all very strange idears; (o)
Then it's time to take it to a reputable computer repair shop (or return it the manufacturer - spirit provided the coordinates above) for the service. It is quite obviously a hardware problem any and if a new battery does not solve the problem, you need some professional help. We have given you all of the tips that we can (including the BIOS flashing), but this is beyond what we can do from a distance.
I hope that the technician can help fix the problem (whatever that is).
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Connected battery does not support 11%
Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?
Early in the morning of 10/07/2016 shows 11% battery not charge.
I plugged last night during the 9 p.m. Mountain time.
After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.
A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.
I have two cables of load. Both worked fine yesterday. Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.
Thank you, and here are my coordinates of the system.
Name of the operating system Microsoft Windows 10 home
Version 10.0.14393 Build 14393
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
System name XXXXXXXXXXXXXX
System manufacturer Hewlett-Packard
HP ENVY 17 Notebook PC model system
System Type x 64-based PC
System SKU xxxxxxxxxx
Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
BIOS Version/Date Insyde F.42, 18/03/2015
SMBIOS Version 2.8
Embedded Controller Version 77,53
UEFI BIOS mode
Baseboard manufacturer Hewlett-Packard
Model baseboard is not available
Name of plinth base
Role Mobile platform
Start secure State
PCR7 Configuration binding is not Possible
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "10.0.14393.206".
User name xxxxxxxxxxxxxx
Time Zone MST
Physical memory (RAM) installed 12.0 GB
11.9 GB total physical memory
7.90 GB available physical memory
13.7 GB total virtual memory
9.38 GB available virtual memory
1.81 GB page file space
Paging file C:\pagefile.sys
Hyper-V - VM monitor Mode Extensions Yes
Hyper-V - second level address translation Extensions Yes
Hyper-V - virtualization enabled in Firmware No.
Hyper-V - data execution Protection YesHi @gdcgray,
Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.
A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.
It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.
Please follow these steps.
Please try a hard reset first. Steps to follow:
- Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
- Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
- Replace the battery and reconnect the charger
- Please try to calibrate the battery.
- Please update the bios from this link http://hp.com/drivers
- Run the battery from this link: http://support.hp.com/in-en/document/c03467259
Please run all the tests of components and if the battery is not please take note of the failure code.
I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "
Thank you and have a blessed week ahead!
-
Satellite L655-13V - battery does not charge
I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
and give me this status: "plugged in, not charging."
And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".
Please, help me to overcome this problem.
Hello
Leave the AC adapter plugged into the laptop for a longer period of time.
In many cases, the battery may not start to demand immediately, as his deeply discharged.
In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual. -
Aspire V5 battery does not charge
My Aspire V5 battery does not load.
I don't know how old is your system, but I know that I had to replace a few chargers for my children, laptops...
Unfortunately, no matter what the company. If it is not used only on a desktop and it never moves a cord of the charger can scoop on...
It could be the PORT where the charger plugs or it could be the lead from the charger. Sometimes you can find the brake by the feeling of the line, and sometimes you can't see something wrong. If you knjow someone with the same type of system as yours, you can try charger of them and if it works, then you know it's your Charger if it don't then it maybe as I said the PORT when you plug...
James
-
charge battery after installing the new battery does not exist
I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
After many attempts to do nothing improved load, especially my temper.
They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
What is going on? How a simple thing like recharging simply disappears. ?
Does anyone have a solution for this problem?See you soon
GeoffThe charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery. The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.
-
Re: Satellite C660 - 1 M 0 - battery does not work long
I have a new Satellite C660 - 1 M 0, and after using it for a week, the battery does not as long as compared to the first time that I used it.
I heard that a charge of initial battery life of 8 hours is required before the 1st use. Is this true?
Hi richardvdoran,
The battery time depends on usage and what you do. For example if you run a large number of programs and work with a high CPU utilization low autonomy and requires AC adapter / CC soon. Also surf the Internet needs battery power.
You can improve the battery life if you use the eco mode power plan. This will reduce the brightness and other things to improve the battery life.
First battery charge time may be 8 hours but that's different and according to other things.
-
I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please
only title bar opens and nothing else... Please help
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Also check the cookie exceptions.
-
Satellite L655 new battery does not charge
Satellite L655 new battery does not charge
Hello halik
It is not easy to say what the problem is here.
Purchased new and original Toshiba battery with the same part number (model number).New battery is recognized by the system?
-
Satellite L30 - battery does not charge
I have a Satellite L30 and the battery does not seem to charge.
The battery keeps flickering light with yellow outside. I can use the laptop when I am connected but when if I'm moving to much the battery seems to lose the connection to the AC adapter.
I don't know if it's the battery or something else.
Can anyone help?Please, remove the battery and use laptop with AC adapter only. I imagine that you will be able to use your laptop properly. When the laptop is ON put the battery back in place and let us know if the battery led will continue to Flash.
If Yes, I'm pretty sure the battery is dead and you need a new.
-
battery does not last long in i pod classic 80 GB
battery does not last long in i pod classic 80 GB
Replace the battery. You can do it yourself, the parts are cheap online, or find a company that will be maintenance for you.
TT2
-
Hi all
I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.
My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:
The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:
But in this case, when I run it, it shows the error I mentioned in the subject line.
If you need more information about my project to identify the problem, please let me know.
Thanks in advance.
S ' Please example from model that comes with labview First
Go to labview Help > find examples and you can search for example.
-You create model with angle range and what kind of special criteria you want to use.
-To do this you must use IMAQ learn pattern before using IMAQ model Match 4
Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Maybe you are looking for
-
express error airport; No DNS server address
OSX El Capitan 10.11.6 MacBook Pro mid-2009 Coupled with Airport Express Airport Extreme. Time Warner Cable improved the internet in our area and it took a new modem. At the new modem and Airport Extreme works with it, having to put the modem in Brid
-
Why Firefox can not display the content of the right that IE is doing well?
It has been long. Whenever firefox has been directed to the page for papers (not just this one, but each book link), it appears like the screenshot. I thought it was the question on the Web page until I used IE. IE shows everything correctly but not
-
Usb otg lighting will allow me to transfer photos from iPhone 5s on a void flash drive?
I would like to transfer photos directly from the iPhone to spare usb flash drives.
-
HP envy 5530: My HP envy 5530 isn't scanning to e-mail
Connection: e-mail server (there was a problem connecting to the server. I can use server for others for my laptop, iPhone and iPad.
-
HP m9600t &; cards graphics
I have a HP m9600t with i7 CPU, Vista Ultimate, 64-bit, 12G of RAM. Can I upgrade the graphic card NVIDIA Quadro family to use Adobe Production Premiium?