Error device Graphice

Similar Questions

• This device (graphics card), cannot find enough free resources that it can use. (Code 12) __NetBook ASPIRE ONE - display adapter resource conflict?

  This device (graphics card), cannot find enough free resources that it can use. (Code 12)
  NetBook ASPIRE ONE - display adapter resource conflict? Can't find the other conflicting H-washer? Graphics Intel Graphic Media Accelerator 3150.
  If you want to use this device (graphics card), you will need to disable one of the other devices on this system. I bought this camera 6 weeks, I can't get the maximum. Set-up for my graphics cards. 800 x 600-32 bit only. Please tell me what to do. And ASPIRE or Windows7 customer service phone #. Thank you.

  Hi athe43,

  Below I've listed the details of error Code 12 and the article with additional information:

  Code 12

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  Recommended resolution

  You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

  Turn off the device in conflict

  1. In the device properties dialog box, click the general tab.
  2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.
  3. Follow the resolution steps provided by the wizard to resolve the problem.

  http://support.Microsoft.com/kb/310123

  This article was originally for XP however the description still applies.  Also, please see the following article on the opening of the troubleshooter of hardware for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope that helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP s 4540: error device Base system in 10 windows Device Manager

  Error device in system in the Device Manager in windows base 10.

  How can I solve this. Thank you.

  ID

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C
  PCI\VEN_197B & DEV_2393 & CC_088000
  PCI\VEN_197B & DEV_2393 & CC_0880

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Hello:

  You need this driver for both ID's

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

• error device "sequence contains no matching element.

  Hallo,

  I just got the VirtualBench and I could use it as I connect it for the first time. I then downloaded and run the program to Window7, so that I would be able to run the program from my PC.

  Since then, I can't work increasingly with the virtualbench. It still gives the same error: device error: sequence contains no matching element.

  What it wronf what should I do?

  Note: I've read a similar question, but it seems that the error missing somehow for some unexplained reason. So, there was actually no mentioned of solution for this problem.

  Thanks in advance for any help.

  Hello Zach Hindes,

  Your idea has solved my problem.

  After the zero (button at the rear of the instrument virutalbench) I could successfully start the application. The error message disappeared and I could interactively use the instrument interactively.

  I reinstalled the software on my PC (Win7) and it runs smoothly also.

  The solution is so simple that I wonder that I wasn't thinking about him in the first place...

  Then, I suggest that developers could add the suggestion to reset the error message. I am sure, that would help a lot of people.

  with my best regards

  Stone

• Error "device ID is not valid" USB-6501?

  Hello

  When I run the script "USB-6501 Control.llb Interactive", I have this error "device ID is not valid"?
  If you know another script that animates the "USB-6501" to check its lines, please help me?

  Best regards

  Right now, I don't have the time to look in the code example, you provided...!

  But why not use DAQmx functions OR DAQ Assistant to write code with whatever functionality you need...?

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• picture of her in error "the graphic filter gif is missing.

  I recently had to reinstall my picture of 2001, he publishes, (Windows XP with service pack 3) but does not start the publication of photo s guard me gives error "the graphic filter gif is missing. I am look at the entire site & have reinstalled several times with negative results. Need help please, I need this program back as soon as possible.

  Hello

  There are a few other files needed for the GIF filter and support:

  Gifimp32.flt
  who should be in the
  C:\Program Files\Common Files\Microsoft Shared\Grphflt
  folder.

  Also, you will need
  Lfgif11n.dll
  who should be in the
  C:\Windows\System
  folder.

  Locate these files. You can see that they are in compressed format.

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• "ORA-19554: device allocation error, device type: SBT_TAPE device name:

  Hello expert.
  why I can't delete obsolete?
  I have this error:
  "ORA-19554: device allocation error, device type: SBT_TAPE device name:
  but I did not all bands. How can I remove this from my config of rman?
  Thank you very much, as usual.
  see you soon,
  Lain
  
  

  RMAN> show all;
  
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
  CONFIGURE BACKUP OPTIMIZATION OFF; # default
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oraclesvi/TMP/backup_db_archive/cf_%F';
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
  CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/oraclesvi/TMP/backup_db_archive/ora_df%t_s%s_s%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/SvilTMP/dbs/snapcf_DBTMP.f'; # default
  
  
  RMAN> report obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  Report of obsolete backups and copies
  Type                 Key    Completion Time    Filename/Handle
  -------------------- ------ ------------------ --------------------
  Archive Log          1      28-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_28/o1_mf_1_22_60086j50_.arc
  Archive Log          2      29-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_29/o1_mf_1_23_6014bh9j_.arc
  Archive Log          3      30-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_30/o1_mf_1_24_603o6gls_.arc
  
  RMAN> delete obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of delete command at 06/14/2010 14:43:17
  ORA-19554: error allocating device, device type: SBT_TAPE, device name: 
  ORA-27211: Failed to load Media Management Library
  Additional information: 2

  Try

  CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;

  Werner

• Delete Obsolete gives error device allocation

  Hi experts RMAN,
  
  It comes to 10.2.0.4
  
  I use RMAN to make backups scheduled the disk. Never on the Strip.
  
  Today, when I ran RMAN > remove obsolete; I got 2 errors:
  
  ORA-19554: error device allocation, type of device: SBT_TAPE device name:
  ORA-27211: unable to load the media management library
  
  I don't know what I can do to work around this error. Do I need to set the default device the disk type?
  
  Thank you
  
  John

  Hello

  CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 35 G;
  is the source of the problems.

  Run:
  CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;

  And check if all entries in sbt_tape disappeared in the output of
  If so try to backup again.

  Kind regards

  Tycho

• Graphic error 'no graphics appropriate' when playing games

  Why "no suitable graphics" don't pop up would be when using microsoft games? Worked well yesterday

  Hi Steamy4000,

  • You receive this error message when you play integrated windows?
  • Check if there is no yellow bang or error message or listed in next to the Graphics Device Manager error code. To check follow the steps below:

  i. Click Start

  II. in the search box, type in devmgmt.msc

  III. develop the graphics card and double-click the sub element

  With regard to:

  Samhrutha G S - Microsoft technical support.

• update errors, nvidia graphics card.

  Hello, I have a problem that I can not update my nvidia graphics card, I saw a post here and tried to re install but it says "graphics card cannot find compatible graphics hardware" and if I try to open the nvidia Control Panel it says "a NVIDIA graphics card has not detected in your system". In Device Manager it shows GT 630 M and 650 M, tried to download two nvidia drivers, but still get this error message.

  PS my cell phone is samsung NP550P5C-A02UK and I tried to download the drivers from the Samsung support for my laptop Web site still nothing.

  Hello

  Thanks for the reply and sorry for the inconvenience caused.

  After looking at the error code, we can get to two conclusions:

  • Graphics card problem.
  • The problem with the graphics drivers.

  I suggest to uninstall the current drivers from Device Manager first, learn more about how to remove devices from Device Manager please visit the link below:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  Once the device is uninstalled, restart the computer.

  Windows will load the base drivers and check if it helps.

  Please keep us updated to help you better.

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.