Error DMA 2100 configuration with Win7 64

Similar Questions

• Configuration Linksys WPSM54G on new laptop with Win7

  Using a Linksys WPSM54G. Working on my old WinXP, bought a new laptop with Win7. Tried to set up as a TCPIP will still not connect. Have seen a lot of posts on this issue, but can't get it on my pc.

  After reading the endless forums on this topic and try LPR printing as proposed (without success), I finally found a simple solution to get the WPSM54G print server work on Windows 7 (64 bit in my case version). Simply download the latest driver for the Lnksys site.  Once you have unzipped the download, right-click on Wizard.exe, select Properties, click the result, then check the compatibility mode box and select Windows Vista (Service Pack 2).  When you run the Configuration Wizard and click on Computer Configuration, instead of the boring message "OS not supported", the driver installation ends normally and you can start printing.

• HP Officejet 650 c (C2859B) with Win7, error: no paper

  Hey guys,.

  I was installing just my old HP Officejet 650 c on a computer with Win7 (64-Bit) with the help of this post.

  At this point there luckily any problem and ther device has been successfully installed. But when I tried to print a Windows test page has me luckily there are no available paper but there is paper in it? Is this the wrong driver, or are there just wrong settings?

  Already thanks for your help!

  Oxford

  resolved, simply restart

• 24 b017c: 24 - b017c dual boot with Win7 possible?

  The b017c is capable of running WIN7 pro in anyway shape?

  I really need to do a system dual boot with WIN7 If Yes.  WIN10 is not be nice to some specific software Attorney that I need to have to work for a client. Win7 is the latest OS, this software is compatible with before an upgrade of expensive software can't be compatible with Win8 or higher (we're talking $1000-2000 range).

  I tried to install WIN7 on this computer after the partitioning of the disk space, and put out several settings in the bios (I had error btw), but WIN7 keeps hanging in the first screen after loading the drivers (language selection screen). Something happens where ports USB closing killing all connections to the mouse and keyboard. I have tried many changes in the bios settings and a retry of the WIN7 Installer (from an installation disc) but no dice.

  Is there a certain combination of settings that must be disabled in the bios to get the win7 Installer right or I'm screwed?

  Thanks for any help

  What an adventure!

  As you discovered, you must completely format the drive as one or the other (GPT or MBR).  You cannot format a GPT partition and the other in the MBR.

  I wonder if you had back and disabled the legacy mode, if W7 would let you install on the GPT - or partition if the disabling legacy mode would also have permitted secure boot.

  In any case, it's water under the bridge.

  Drivers... Here are some that may work...

  First install the driver from the Intel chipset and restart the PC.  A 2nd on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

  See if this graphics driver works... 3rd one down on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/26228/Intel-graphics-driver-for-Windows-10-and-Windows-7-8-1-15-40-?v=t

  Audio: Accept the agreement.  Download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Ethernet: Download, unzip and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Card reader: download, unzip and install the driver from the 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Wireless: 2nd pilot down on the left.

  https://Downloadcenter.Intel.com/download/26242/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

  Bluetooth: 2nd one down on the left.

  https://Downloadcenter.Intel.com/download/26311/Intel-wireless-Bluetooth-software-for-Windows-7-?product=89450

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Assistant of the Driver NI-VISA is compatible with Win7?

  Hi all

  I was wondering if NI-VISA is compatible with Win7, because I want to use it to configure my device. Thank you.

  Here is the link for the latest driver VISA which includes support for Windows 7:

  NI-VISA 4.6.2

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Can I feed 2 hard drives, one with XP and one with Win7?

  I have 2 160 GB SATA HDs. C: drive is runing Win7, and I want to install the other drive with Win XP, for me to perform older simulations.

  I unplugged the C: drive that has Win7 on it and went through the usual configuration with winXP, but after all installations have finished.

  I am facing a blue screen that tells me I have a virus or bad drivers etc.

  I ask myself where I want to install Windows XP at all times, so I guess that even if I unplugged the c drive where is installed Win7

  I guess that as a 64-bit PC, it I cannot install WinXP 32-bit. Or what I have to erase Win7 first, and then install Windows XP, then Win7 after.

  Please can someone help.

  Thank you.

  First, if you have Win 7 Pro or Ultimate, you can use the XP Mode (free from Microsoft).

  If this does not work for you, what you want is called "dual-boot".  There are many sites that explain how to set up (and 32 64 bit vs has nothing to do with it).  Here's one (or use your favorite search engine): http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• Scan of old WinME HDD with Win7?

  Hello. Someone I know has an old McKey N256 Model: 53073U6 HARD drive. He has/is working in a card mother Gigabyte GA - 7ZM.

  I wanted to analyze the HARD disk for any malware because it was an old computer that had some top downloads. I think that the way to easiset to do that is detached from the former stop and connect it to the Asus M5A99X EVO R2.0. I looked on the product page and specifications, it does not have an IDE connector.

  I also have a card ASUS M3N78-VM (mine). Can I plug the old drive in there and do a scan of some sort, then put it back?

  But the old HDD is an IDE I think. It has a Ribbon that connects to the old mobo, no SATA. Can I install old HDD like that in the new Mobo ASUS? If not it's, what with another type of internal connector (s)?

  Does anyone know if a scan of current Norton 360 in Win7 would detect any threat of an old machine of WinME? The malware is the same, or a program more recent must be installed for this task?

  In reality, it is unrealistic to buy an IDE box for this one task, or to pay a lot of money for pictures, documents, video, etc. to be fired. The old case/parts work with WinME and DVD or CD - R can be engraved with the old files, then transferred to the Win7 computer. But a SCAN IS NEEDED to be sure.

  If Exchange cannot be done, I think that a network can be configured with a laptop? There are two laptops with protection against malware with Vista Home Premium 64-bit and another one with Win7 that can do a scan (I guess) on WinME computer? The old WinME computer has only a 56K modem on it if. Laptops have a 56 k port, I don't know if a network can be created there? I don't know how to set up if necessary.

  Can you get it someone please let me know what to do.

  If you do not have a machine with an IDE connector and you don't want to buy an adapter USB to IDE, then I suggest you burn the files to CD on Win ME machine that tells you that you can do.
  Copy them to a folder on the Win 7 machine and run your scans it there.  If you run executable files of ME of machine or open all documents there is no risk of infection.

  There are other ways to transfer files, but your concern is excessive.

• BEA-000362 < server failed. At least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If the database is selected, then DataSourc

  My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none.  I can't even to the Server Admin page.

  Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory

  Help, please! Thank you!

  Joe

  ****************************************************************************

  # < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. >

  # < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content:

  C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >

  # < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. >

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool.

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. >

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version:

  WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer.

  Listening address: 7001

  Address public n/a

  True active http

  Tunneling Enabled false

  Outgoing Enabled false

  Admin traffic enabled true fake license to ResolveDNSName >

  # < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer.

  Weight of the channel 50

  Accept the rear 300

  Timeout 5000ms

  Message Max Size 10000000

  Timeout message 60 years

  Timeout of 65

  Tunneling Timeout 40 s

  Tunneling Ping 45 s >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. >

  # < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows:

  awt. Toolkit = sun.awt.windows.WToolkit

  leader. Encoding = Cp1252

  leader. Encoding.pkg = sun.io

  leader. Separator =.

  Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment

  Java.awt.PrinterJob = sun.awt.windows.WPrinterJob

  Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar

  Java.class.version = 51.0

  Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed

  Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext

  Java.Home = C:\JDK17~1.0_6\jre

  Java.IO.TMPDIR =

  Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;.

  Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory

  Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url

  Java.Runtime.Name = Java (TM) SE Runtime Environment

  Java.Runtime.version = 1.7.0_60 - b19

  Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy

  Java.Specification.Name = Java Platform API Specification

  Java.Specification.Vendor = Oracle Corporation

  Java.Specification.version = 1.7

  Java.Vendor = Oracle Corporation

  Java.vendor.URL = http://Java.Oracle.com/

  Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/

  Java.version = 1.7.0_60

  Java.VM.info = mixed mode

  Java.VM.Name = VM Server Java hotspot 64-Bit

  Java.VM.Specification.Name = specification of Machine Java virtual

  Java.VM.Specification.Vendor = Oracle Corporation

  Java.VM.Specification.version = 1.7

  Java.VM.Vendor = Oracle Corporation

  Java.VM.version = 24, 60 - b09

  javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder

  javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl

  javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl

  org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB

  org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB

  OS. Arch = amd64

  OS. Name = Windows 7

  OS.version = 6.1

  Path.Separator =;

  Sun.Arch.Data.Model = 64

  Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes

  Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin

  Sun.CPU.endian = little

  Sun.CPU.isalist = amd64

  Sun.Desktop = windows

  Sun.IO.Unicode.Encoding = UnicodeLittle

  Sun.java.Command = weblogic. Server

  Sun.java.Launcher = SUN_STANDARD

  Sun.JNU.Encoding = Cp1252

  Sun.Management.Compiler = HotSpot 64 bits compilers Tiered

  Sun.OS.patch.Level = Service Pack 1

  User.country = en

  User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain

  User.Home =

  User.language = en

  User.Name =

  User.TimeZone =

  VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap

  WebLogic. Name = AdminServer

  WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server

  WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server

  . >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. >

  # < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >

  # < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. >

  # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. >

  # < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. >

  # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >

  # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions.

  # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. >

  It may sound crazy that I am answering my own post.  As he complains about MigrationBasis.  I tried to go to the config.xml file and changed

  Cluster-0

  unicast

  database

  TO

  Cluster-0

  unicast

  consensus

  And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration.

  Joe

• The MAF project has been configured with an unsupported JDK

  Hello

  I am facing problem in jdevloper for implementation of the MAF. I have provided the JDK 1.8 version. But it still gives the following error.

  'D:\Jdev ADF Home\mywork\MyMobileApp\ApplicationController\ApplicationController.jpr' project has been configured with an unsupported JDK.  Make sure that the "profile 2 Compact MAF JDK 1.8 & quot; is used.

  Type or a variable 'oracle.adfmf.application.LifeCycleListener' not found.

  Jdev Version: Studio Edition Version 12.1.3.0.0

  Extension of the MAF: 2.1.0.0.41.150115.1352

  Please suggest me to fix this problem.

  Thank you

  SAN

  Simply change name Java SE 1.8.0_40 to the MAF JDK 1.8 Compact 2 profile

  I guess it will solve your problem.

• Update error U44M1P7 need help with a real solution.

  Let me first say that I am a user of Adobe for a long time and use this creative cloud since may, 2012. A few days ago, I tried to download and install Pnotoshop CC. It downloads and installs, but must then update fails and gives the U44M1P7 error code. 2 adobe technicians tried to fix it, but they are as confused as I am. Jeff Wright proposed in accordance with the notice to http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html as Adobe just give the error code does not help. I tried to follow this, but for some reason any my Windows 7 Home Preimum 64 bit SP1 on a Dell 620 Intel i5/6 GB of RAM is not a

  • 64-bit Windows (XP, Vista, 7): Directory \Program files (x 86) \Common Files\Adobe\Installers. Or any directory Adobe\Installer in any directory that I can find in any case.

  I downloaded and installed Dreamweaver CC and it requires an update fails with the same error code. The CC of Dreamweaver and Photoshop CC ARE installed and seem to work. Yet all my CS6 products are always installed and up to date.

  Think this is limited to my PC, I tried to install the CC version on a laptop HP simular configuration with identical results.

  NOW, I see a lot of people have the same problems, I am, or at least it seems to be the same if this seems to be a larger problem than just my incompetence as an operator on computer or less work on dirt. I'm tender hand to the community that I know in my heart that someone has already solved this problem.

  If you please if you know what is happening and can bring a solution or something more informitive Adobe Advisor to check the logs, which do not seem to exist, if it please post and inform the rest of us.

  
  

  DouglasB

  Thanks to Texas photography

  On July 29 I installed CC extensions manager then discovered that I had to install Extension Manager CS6 to convert MXP ZXP file to install, FYI the reason practice only I can find the change in MXP to ZXP and not including the MXP in ExchamgeManager CC Converter seems to be that people will buy new extensions of the thought of Adobe Exchange their old extensions no longer work.

  After installing these Extension handlers and convert a couple of MXP ZXP and their installation, I thought that I would try to update my Adobe again. You know just to smile and laugh. I have tried to update on July 22, memory and still have errors. Well, lo and hold after you have installed the Extension managers, etc., updates to Dw, Ps and bridge to knit!

  Don't ask me why but all my Adobe programs are happy again and updated.

• Error reading the configuration file

  I install the Adobe Access 4.0 trial license server and when I run the g - r on the Tomcat installation dir \licenseserver Validator.bat I get a message "error reading configuration file. Here's the log dump:

  [] 2012-12-20 22:46:32, 176 INFO [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] class loader of partition creation «flashaccessserver"with «[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]» libraries

  [2012-12-20 22:46:32, ERROR 582 [. com.adobe.flashaccess.server.license.tools.Validator [Partition (flashaccessserver)]] could not validate the deployment tenant "flashaccessserver/sampletenant".

  com.adobe.flashaccess.server.common.configuration.ConfigurationException: error reading the configuration file

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)

  to com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl. < init > (TenantConfigurationImpl.java:110)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)

  at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment (Validator.j ava: 255)

  to com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment (Validato r.java:283)

  at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment (Validator.j ava: 301)

  at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)

  at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)

  Caused by: org.apache.commons.configuration.ConfigurationException: could not load the configuration

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)

  ... 7 more

  Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; HVAC-complex - type. 2.4.b: the content of the element "KeyServer" is not over. A the "{"http://licenseserver.flashaccess.adobe.com/tenant": file"}' should. "

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException (exercise wn Source)

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$ XSIErrorReporter.reportErro (Unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT (unknown Source) type

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType (KNU nown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent (exercise wn Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement (KNU nown Source)

  to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDri ver.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (exercise wn Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse (unknown Source)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)

  ... 9 more

  I use a relative path to my .pfx file to the transportServerCredential and the licenseServerCredential in the flashaccess - tenant.xml and my password was encoded using the Scrambler.bat.

  Also, when I check using the configuration http://< LicenseServer >: 8080/flashaccessserver/flashaccess/license/v2 I get the message "license server is configured properly."

  Any ideas why the Validator.bat cannot read the configuration file?

  Neil and may,

  I also used the evaluation of access version 4.0, and I got stuck in the same place you did.  I had two main symptoms.

  (1) the validator was not with the same error that you are experiencing.

  (2) later, while trying to acquire a license for playing packaged content, encrypted, the license acquisition failed, and the cause of the original error has also pointed out the Key Server parameter in flashaccess - tenant.xml.

  According to the documentation, the certificate server key (and in fact the key server itself) are supposed to will be necessary only when a policy calls for remote key service to clients of iOS.  But, I took a chance and added the .pem file in the sampletenants directory and made him the flashaccess - tenant.xml as follows:

  Configuration | Tenant | Certificates | KeyServer. File | path =

  The result was a successful validation of the configuration and the successful license acquisition and reading - and the key server is not even in the course of execution.  Apparently with 4.0 certificate is part of the minimum for the scanner configuration, even if the documentation says something quite different.

  Good luck, hope this helps.

  Scott

• [IOM] Error in direct provision (with automatic backup form)-GTC DB App Table

  Hello
  
  I get an error message when you configure the direct delivery of a GTC DB App Conn using IOM access policy (and the members of the Group) or by manual configuration with prepopulate and auto save the form.
  Commissioning manual with prepopulate ONLY (not with auto save form) WORK!
  
  Some information about my config to IOM:
  -Pre-fill the adapters are implemented on both forms (parent and child)
  -"Auto prepopulate" and "Automatic registration" is set up to process definition
  -For the direct provision, I created an access strategy with a group of associates who has a membership rule
  
  That it works:
  -Provisioning manually, using prepopulate the adapters only, not auto save form. The two tables is updated correctly
  -All * 3 tasks are called and finished with status = Completed *: 'System Validation', 'Create a user' and ' Table child Oud_ < table name child connector > _US row Inserted.
  
  Direct test commissioning:
  -J' tested add the resource manually with form pre-populate and AutoSave configured and also through membership policy or group access. The error is the same on both tests
  -The resource is displayed as it is put into service and it's created an entry in the parent table of the resource, but not on the child table
  -J' have also observed that only: "Validation of system" and "Create User" tasks have been executed (status = Completed). But it lacks the task "Table child Oud_ < table name child connector > _US row Inserted.
  -News error log displays only an error as to the table of the PMU (information groups), but I don't know if this is the cause of creating entry on the child table.
  It seems that the SQL stmt is seeking a ugp_name (group name) using ugp_key, but which has the value null.
  "SELECT ugp_name FROM ugp WHERE ugp_key = java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression.
  Note: The test manually (without backup AutoShape), I got "SELECT ugp_name FROM ugp WHERE ugp_key = 1' the same SQL stmt, but the value is provided.
  
  My guess:
  -It seems that the error is interrupted the process of execution of any kind "Table child Oud_ < table name child connector > _US row Inserted" task does not, even if the previous tasks are finished with status = Completed. Therefore, the entry is not created on the child table.
  
  Please, no supposition or help would be very helpful. Where nothing works, I guess I'll have to create and customize a task 'child update form' as a workaround called after the task "create a user".
  
  
  Kind regards
  Hugo
  
  My environment:
  -Windows 2003, WebLogic 10.3.0.0, IOM 9.1.0.2 BL4, Oracle 10 g, Java 1.6 DB App Table connector 9.1.0.2 (from October 2009)
  -Target resource: Parent and child Table (Oracle 10 g - the same IOM Pb)

  See the bottom of post for confirmation:

  Re: IOM: unable to pre-populate fields in the child form