Error path favorite of Politica SRM IBM DS5100

Similar Questions

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Scheduler BI - error "path not found".

  People,
  
  I am trying to edit 'My account' to set devices in 'My products'-> book.
  I could note the health empty error message and not able to create any kind of device.
  
  ******************************************************************
  Mount errors
  
  Path not found (/ users/admin/_prefs/instruments/e-mail)
  Error details
  Error codes: U9KP7Q94
  ******************************************************************
  
  Please let me know where things could've gone wrong.
  
  Thanks in advance!
  
  Cecilia.

  You must manually create.

• Error - path of transformation

  When you try to install a program to speed up my Windows XP PC, I get a message error asking to check the path of transformation and thjere is a button 'OK '. Clicking on it makes the error message if go, but nothing else. How to check the path of transformation?

  It will help to know what program you are trying to install...

• Whenever I restart my computer, SolutionCenter.msi error - path / file not found

  Something has happened and am now get error message every time I reboot computer:

  "The feature you are trying to use is on a network resource that is unavailable."  It is said to enter the alternative path.

  I don't know how to proceed.

  What should I do to fix?

  Thanks for the quick response!

  Original title: SolutionCenter.msi - path / file not found

  Hello9 Cathy Lind,

  The problem is related to the HP printer software. If you have an HP printer, go to programs and features to uninstall and reinstall.

  Please watch the lower thread for a suggestion help your question:
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6d2d77f3-1115-42ef-94cc-aa7d4343a23e

  Let us know if that helps.

  Marilyn

• ORA-12008: error path refresh materialized view... Bug?

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE    11.2.0.3.0      Production
  TNS for Linux: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production
  
  SQL> drop materialized view log on test_tbl;
  
  Materialized view log dropped.
  
  SQL> drop materialized view mv_test_tbl;
  
  Materialized view dropped.
  
  SQL> drop table test_tbl;
  
  Table dropped.
  
  SQL> create table test_tbl(
    2   test_id   number(10)   primary key,
    3   test_name varchar2(10) not null)
    4  ;
  
  Table created.
  
  SQL> insert into test_tbl values (1,'bob');
  
  1 row created.
  
  SQL> insert into test_tbl values (2,'joe');
  
  1 row created.
  
  SQL> insert into test_tbl values (3,'john');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> create materialized view log on test_tbl
    2  with primary key , rowid, sequence
    3  (
    4   test_name
    5  )
    6  including new values;
  
  Materialized view log created.
  
  SQL> create materialized view mv_test_tbl
    2  refresh fast on commit
    3  as
    4  select test_id,
    5         test_name
    6  from   test_tbl;
  
  Materialized view created.
  
  SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
  
  0 rows updated.
  
  SQL> commit;
  
  Commit complete.

  OK, so it's all good. Now, if I create the log of the materialized with the possibility of COMMETTRE SNA view:
  

  SQL> drop materialized view log on test_tbl;
  
  Materialized view log dropped.
  
  SQL> drop materialized view mv_test_tbl;
  
  Materialized view dropped.
  
  SQL> create materialized view log on test_tbl
    2  with primary key , rowid, sequence
    3  (
    4   test_name
    5  ),
    6  commit scn
    7  including new values;
  
  Materialized view log created.
  
  SQL> create materialized view mv_test_tbl
    2  refresh fast on commit
    3  as
    4  select test_id,
    5         test_name
    6  from   test_tbl;
  
  Materialized view created.
  
  SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
  
  0 rows updated.
  
  SQL> commit;
  commit
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-01006: bind variable does not exist
  
  
  SQL>

  Commit an update that updates no line against a main table for a single table quickly updatable materialized view results in the error above when the log of the materialized on the main table view is created with the option of COMMETTRE YVERT. I'm guessing that's not how things are supposed to work. Or am I missing something here? Someone else has encountered this before?
  
  See you soon.
  
  Published by: task on 25 January 2013 13:27

  Hi, detaching,

  Looks like that Bug ID 13910043

  Concerning
  Peter

• Application error paths of transformation

  Buy Adobe Acrobat 8 online in 2008.  Have since lost ability to open, update, download and uninstall my computuer.

  Consistantly receive error messages on the application of "pathways of transformation."

  Do not have a clue about a transformation of this path is or how to fix the problem

  Run the Acrobat cleaner (http://labs.adobe.com/downloads/acrobatcleaner.html) then

  Restart your computer

  then re-install.

• Error Exaprom in deployed PDF error path and permission to application, how to solve this problem?

  Hello world

  In the system runtime (executable) you must specify a valid path.  If you want the same behavior (development system), you need to change:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\Exaprom PDF\VIs\Low level\File low level\File Dialog.vi

  

  To be honest, I don't remember why it is not the same behavior...

• Error: Path/Source Safari is not found

  The error is a bit weird! On Windows 2000 Workstation NT

  Hello

  Please would you describe us in detail the circumstances surrounding this issue?

  Reference: Suggestions for a question on help forums

  http://support.Microsoft.com/kb/555375

• Error paths overlapped

  IM in a mystery.

  For some reason, Illustrator SOMETIMES create an 'exclusive' results when the paths overlap on his car, but sometimes it is not, never if I do the same procedure.

  Here is a video explaining my problem: http://CL.LY/3e2s2e0a3w3C/Misterio.MP4

  No idea why Illustrator for this?

  Adobe Illustrator CC 2014 18.1.1

  The difference is here

  

  

• ORA-12008: error path refresh materialized view

  Hello world
  
  I get a weird error when I try to do a quick refresh on my materialized view. My basic approach is simple, that I had a newspaper of MV on my fact table with all the columns required by the materialized view, sequence, including NEW rowid VALUES.
  
  I have my setup of materialized with a view my summary level, COUNT (*) and COUNT (EXP) for every SUM (EXP). I check the MV_CAPABILITIES_TABLE, and of course, it can be run with fast refresh. I have my fact table in the schema USER1 and my materialized in USER2 schema view.
  
  When I create the materialized view, there is no problem. If I immediately executes a fast refresh (EXEC DBMS_MVIEW. REFRESH ('MY_MV', 'F'); ), once again, no problem.
  
  However, if I run the ETLs that update the source fact table, and then I run the quick update again, I get ORA-120008.
  
  But if I do the exact same MV in the scheme of the User1, I have no problem making quick refreshes. What is happening with this? Is the owner of the table must be the one with the materialized view? User1 and USER2 are on the same PB and have the same table space. Should User2 also select additional subsidies on the source fact table? What I give to select on the MVIEW connect you somehow?
  
  Thanks for the help!
  
  -Joe

  The mview journal is a separate table. You must grant select, insert, update, delete on it to the user mview.

• After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

  After downloading the programs I can't install them

  Hello

  1. which site Web you downloaded the program from?
  2. you use a download manager to download the program?
  3. what web browser do you use?
  4. don't you make changes on the computer before the show?
  5. were you able to install other programs on the computer?
  6. what program are you trying to install?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
  
  Method 2:
  You can also perform a clean boot, and then try to install the program and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can run Microsoft Safety Scanner in Mode safe mode with network and check.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

• Error Installting ESXi 4.1 on IBM HS22V blade

  When you try to install ESXi 4.1, I get the following...   Any ideas?

  vmkctl. HostCtlException: Could not load module/usr/lib/vmware/vmkmod/vmfs3: failure

  Refer to:

  http://communities.VMware.com/message/1579296#1579296

  This is the process for the custom installation.

  Note: If shared storage is available, and then after the first customization you should be able to put the drivers on the shared storage and then access it from there.

  Kind regards

  Jonathan

• Table of path error 1430 in the loop for

  Hello!

  I have a problem with the 1430 error: path is empty or relative, which seems impossible. The thing is that I have a battery of indicators of path connected to the loop for (check the .jpg and there is no problem with writing to a file by using the paths of an array with the first and last index.) Others are not saved because of the error... to be honest, that all data paths are absolute. Record in the file of the idicator path is the work of a Subvi (merge data vi) but it is in a for loop because I need to make it available to multiple files. There is no error that occur with the work of Subvi to a path. The question is: what labview makes with the paths saved in a table between the loops? I have just run out of ideas so if someone had some time, I would really appreciate for all the tips and ideas.

  K.

  Hello again,

  If someone was interested in the happy ending: the solution is: 2 loops for. I think there must be something with the way that labview sends data between iterations. In any case - don't know how much exactly but works

  the floor is .jpg.

• In the Service Console the path value preferred on vSphere?

  Hello

  We have a problem here.

  Environmental: political vSphere Host, 8 HBAs, path: fixed path of vmware, on 1,000 paths to storage

  To reduce the total number of paths we want to reconfigure our warehouses of data and reduce the number of used HBA for warehouses of test and reference using only 2 of the 8 host bus adapters. We use all the time, then put 6 of them on all our servers of vsphere for people with reduced mobility, only two remain active.

  That is why we have active and people with disabilities with the help of a script on paths of console service - it works very well.

  But after that we reduce active host bus adapters, vsphere seems to forget reset the preferred path (just checked in the GUI). We put vmhba1 and vmhba7 to be active, 0-8 (except no. 6 as is the lsi controller) should be disabled, but on most of these disabled HBA Lun remains the favorite.

  On esx 3.5 service console, we were used to:

  / usr/sbin/esxcfg-mpath - favorite - political fixed = - lun = $lun - path = $: ${lun # *------:}}

  but these options (favorite, political) seem to be outdated since vsphere, which apparently obtained these commands on the api storage?

  Can someone answer the following questions on this issue:

  1 did affect the feature if you prefer the path is one of the disabled?

  2 will be the vsphere host keeps this configuration after reboot (disabled HBA to a lun, active paths)?

  3. is there a new command to set the access path AND / OR politics (MRU, FIXED, RR) to a logical unit number?

  Thanks in advance,

  Kind regards

  Alex

  Hello

  for active/passive, please use MRU;

  as you know, when fixed in use and the LUNS mapped to multiple hosts, 1 host perhaps selects path fixed-to-controller 0 and 2nd host perhaps selects fixed path to controller 1, then the current path will change between two controllers, way stolen here;

  Binoche, VMware VCP, Cisco CCNA