Error "RunDLL" Windows 7
I've just loaded Windows 7 on a new PC and make this message at startup and about every 5 minutes:
C:\Users\mike\AppData\Local\ARCADE-1\CATHEL-1. DLL
Module not found ".
Please notify. Thank you.
Try the solutions in the following thread:
Tags: Windows
Similar Questions
-
I get an error rundll at startup... It is said c:\windows\wsaolich.dll How can I solve this
This happens whenever I start windows xp sp3
There is no file in Windows XP. This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware. If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.
For more information about how to use the Autoruns, please see:
-
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and think of memory starting to dissapate, I tried to remove the afew channels recently and I was wondering if that has something to do with the error.
Hello
Were there any changes (hardware or software) to the computer before the show?
Method 1: Put the computer to boot and see if it helps.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.Note: follow step 7 to reset the computer to start as usual after the boot process.Method 2: Perform the steps from the link below and see if it helps.Method 3:Run a full scan with your antivirus software.Hope this information helps. -
At the start of XP, make error rundll error loading \3\lxcctime.dll
When windows load I get this error rundll error loading \3\lxcctime.dll. How can I fix it?
OS: windows xp home edition. recently had a lot of viruses on the computer. mainly Trojan viruses
When windows load I get this error rundll error loading \3\lxcctime.dll. How can I fix it?
This error is related to your Lexmark printer. The following procedure may solve this problem, although I've seen conflicting reports.
Follow the instructions here to uninstall and reinstall the printer software: Article 1. Between steps 4 and 5, perform the following steps (if you can not complete step 4, post back with this information):
- Open a command prompt window (start > run > cmd > OK)
- Type the following commands in the black command prompt window, pressing ENTER after each line. Note that there is a space after the = not before
net stop spooler
dependent on the spooler of sc config = RPCSS
net start spooler
outputTo step 6, start here: http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD
-
Original title: runDLL Error Message
When I start the computer I have an error: runDLL - error loading C:\Users\Hav\AppData\Local\Temp\hnszs0.exe - the specified module could not be found. How can I fix it?
Hello
1. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1: Try to start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
In addition, please see the link below with a similar problem reported.
Help with RunDLL error on startup
Hope this information is useful.
-
On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes
HI MikeGeorgen,
I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.
Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:
Remove and reinstall iTunes and the components of the software for Windows 7 and later versions
Thank you for using communities Support from Apple. See you soon!
-
Windows 10 Please reinstall itunes error 7 (windows error 126)
When you try to install iTunes on Windows 10 company 12.4.3 I get and error: Please reinstall itunes error 7 (windows error 126). So I did the logical thing Google search, apple supports, youtube and microsoft technical support and have tried all the remedies and still can not installed iTunes. I tried solutions on the posts below and the success of more, but not much.
If you can't install or update iTunes for Windows - Apple supports
Have you tried to install the latest version of Microsoft .NET Framework and re - install iTunes?
https://www.Microsoft.com/en-US/Download/details.aspx?ID=17718
-
Drivers error recover Windows Vista on Satellite A200
Hello
I replaced the HD of my Toshiba Satellite A200. Replicate the original drive of partitioning in the new drive and installed the original SO (Windows Vista) from the recovery disc.
Everything was fine. However, when I booted Windows for the first time, he could not put an end to the automatic configuration phase. An error message appears on the screen: he had been unable to find all the drivers it needs.
After accepting the error message, windows has restarted the system without giving me no chance.
Can anyone tell me what was wrong with the Windows recovery process?
How can I add the necessary drivers or skip the process of autoconfiguration to do more later?Unfortunately, no one can say with certainty what went wrong.
Please set the BIOS to the default settings and try to install recovery image once more. It will be interesting to see if the same problem occurs again. -
In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.
You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?
-
I get an error BCCode windows that I can't understand. Help! -BCCode: ea
I'm getting "BCCode: ea BCP1: FE902DA0 BCP2: 82592308 BCP3: 828D9AD8 BCP4: 00000001 OSV: 5_1_2600 SP: 3_0 product: 256_1" is - anyone know what it is?
Hello
1. what operating system is installed on the computer?
2. when exactly you get the error?
3. don't you make changes to the computer before the show?Step 1: I suggest to start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2: If the problem is resolved in safe mode, I suggest you perform the clean boot and remove the program that is causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.Additional information:
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Note: When looking for errors of memory you may lose data. When you perform the upgrade in place make sure that you back up the data.
-
Hello
I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!
Rick
original title: burning a CD problems
Hello
(1) what version of Windows Media Player do you use?
(2) what is the model of your CD burner?
(3) you have the latest drivers for the CD burner?
(4) what type of file you are trying to burn?(5) you receive error codes?(6) what version of the operating system is installed on the computer?(7) we get to a particular file?
Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
Method 3: You can also check out the link below:Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions
I hope this information helps! -
Get the blue screen error saying windows has shut down to prevent damage to this computer
My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?
* original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *
Hello
1. what operating system is installed on his computer?
2 did you the hardware changes to his computer before the question?Perform the steps in the article and see if the problem is resolved or not.Resolve stop (blue screen) error in Windows 7
Also check the event viewer for error logs
What are the information contained in the logs of the event (Event Viewer)?
-
When I turn on my blue screen laptop appear after windows error recovery windows also appear
When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...
Hello
· What operating system is installed on the computer?
· What are the error messages that are displayed on the blue screen?
· Did you make any changes before the show?
In the recovery menu, select Safe mode and check if you can connect?
You can also try to restore the system in safe mode.
If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Reference: resolution in Windows 7 stop errors (blue screen)
-
Error code Windows Update 800700 B & System Restore 0x80071A91 error
Cannot install critical system updates. Download the update error 800700B. Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers. Has not fixed the problem. Through research found related error on the system restore. Am unable to create a restore point and 0x80071a91 error. A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
attrib s h *.
del *.blf
del * .regtrans-msand get an access error:
C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
The process cannot access the file because it is being used by another processAny ideas?
Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus
You don't have to bother. This is not good. :(
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxBackup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3
After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxNB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe==============
[1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Code800F900 'unknown error in windows update' trying to download windows vista service pack 2
try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter
* Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl
Why did you delete your post where you said that Norton application has been installed at some point in the past?
There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!
Let's cut to the Chase. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxTip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
Tecra 9100 does not start in windows-black display
Hi, just found this forum.I have problems with my old laptop Tecra 9100 that ive had since.I stopped last night, started this morning and now is no longer boots.It gets past the Toshiba screen and windows xp scroll bar screen seems in good condition.
-
Wireless scanning does not work - neither analysis when it is connected. Rpet "the computer does not.
-
Need recovery to p7 - 1446 CD s PC desktop
New (1 month) P7 - 1446 s Desktop PC (bought at Office Max). Looking for * provided by HP * recovery... media not those I can do for me (I understand HP for years, I assume all responsibility for discs and how / if they work). I want that the disks
-
It just happened today while I was browsing the internet. now I can't access all the programs. ask (open with..) for example outlook express or any other... my anti virus support said it is not a virus... could be updated to hp that does not fit my c
-
Automatic transfer of event log errors?
It is perhaps a stupid question; at work, I run a Windows 2003 R2 server, in which 4 Windows XP clients connect to (and a client of Windows 7) as well as a couple of printers. My question is probably quite simple, but y at - it a way for errors in th