Error - Unable to add data to the "unknown document.

Similar Questions

• Unable to add data to the Virgin DVD + RW double layer after having ejected backup problem.

  Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.

  Hi sal69,

  This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.

  You can follow the steps mentioned in the link below

  You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista

  http://support.Microsoft.com/kb/928355

  You can download and install the latest service pack on the computer

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to add data to the ASP Javascript page?

  If I do a page with the type of document ASP JavaScript the ability to add a db connection is grayed out even if the onumbers, type and server controls by them.  Do the same with the document type on the ASP VB script and I can't add db.  I don't think I used to have this problem before.

  Any ideas on what I'm doing wrong would be appreciated. Thank you.

  I assume you are using CS5, which dropped support ASP/JScript.

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• Add data in the header of a .wav file

  Hello guys,.

  I seek your help for a small problem that I can't spend during my internship.

  Here's what I want to do: I acquire signals that I write a .wav file. What I would do then is to reopen this .wav file and add data in the header, such as the sensitivity of the microphone for example. I am doing this is because it's one of our program of works, it can resume the pressure vs time signal using this information. I already have the hex code I need to add, but I was not able to determine if such a thing is possible or not after a day of research ideas would be greatly appreciated. I wonder if Matlab might do the trick but I prefer to stay with the 'normal '... screws

  Thank you very much for your help.

  To insert data into the middle of a file, you will need to rewrite the entire file after that point, as Gerd said in the linked post.  I would do the following:

  1. Search for the location you want to put your new piece
  2. Read 65 000 bytes from forward and store in a local cache (shift registers work well for this, or just a wire at this point).
  3. Write your new piece, taking note of how long it is
  4. Give your data buffered less the length of your new song
  5. Read a 65 000 other bytes and put it in a new buffer
  6. Write the end of the old buffer and a part of the new buffer until you get to 65 000 bytes
  7. Repeat 4 to 6 until you reach the end of the file
  8. Update the offsets in the header to match the new locations of piece, since you have moved things

  You can probably do it with both data pads in a pair of registers at offset in a loop.  The 65 000 bytes is chosen for best performance.  You can use other sizes, but your speed can suffer.  Let us know if you encounter any problems.

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• "Unable to send data to the printer.

  I have a HP deskjet F4440 printer.  He has always fought linking to our Mac.  We restart the printer or the computer often to do print, but after doing one or the other it would work normally.  But now it doesn't connect at all.

  I uninstalled and reinstalled the printer.  I downloaded and installed the software from the apple support Hewlett-Packard printer.  I restarted my computer, uninstalled and reinstalled my printer.  It presents itself as "in use" but says "Unable to send data to the printer" when I try to send a simple text of pages for print test.  When I try to scan it shows that the scanner is connected, initially said "waiting for scanner", then 'scanner is not available' stops.

  Do you have any suggestions?  Thank you!!!

  Hi mandi820,

  Welcome to the HP Forums! I see that your HP deskjet F4440 printer has difficulty to connect to your Mac. I'm happy to help you with this problem of connection! I have a few questions for you:

  • What version of Mac OS X are you using? OS x: find your OS version and build information.
  • How is the printer connected? Wireless, or USB?
  • Can you make copies with the printer?
  • The cable is connected to a surge protector or directly on a wall outlet? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.
  • You can print a self-assessment report extended? Print a self-test report extended.

  Hope to hear from you and have a great day!

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• why I'm unable to copy data to the USB in windows 7

  why I'm unable to copy data to the USB in windows 7

  Hello

  You don't say how you try to do.

  You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.

  It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V

  Another method is to drag and drop the data from one drive to another.

  See you soon.

• I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator

  I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator... also not able to remove all the data from USB key

  Good so take a look here

  Run the FixIt first, then if that doesn't work, see these topics:
  • Faulty, misconfigured or missing device driver
  • Out-of-date firmware or BIOS
  • Incorrectly configured root hub
  • Remove and reinstall all USB controllers

• After using the iphone app, I get error: "unable to get labels for the script.

  Hello

  I think that this is related to the iphone app for Adobe Story. I added some comments on my script using the application, now when I try and open my script, I get an error; "Unable to get labels for the script.

  I tried Internet Explorer 9 and the desktop application. Both produce the same error.

  The script is completed to 55 pages, so I really don't want to lose...

  Thank you

  Hi Chris,

  We have fixed the problem and shared the document with you back. You can accept the notification, copy the document into a new (to be an owner) and work on it now. Meanwhile, we will also investigate why the problem occurred at all.

  Sorry for the inconvinience.

  Kind regards

  Sunny

• Add data in the dumpfile parameter in command exp

  Hello
  
  I have installed 10.2.0.1 on windows server 2003.
  
  I took the backup hot using the command.
  

  Exp username/pwd FILE=C:\DataBaseBackups\3AMNEO.DMP LOG=C:\DataBaseBackups\3AMNEO.LOG

  which works very well.
  
  I made a batch file that have this code and that run daily at some point and overwrite existing (i.e. the last day) backup. But I don't want to do.
  
  I would like to add data with the file name so that every day, it creates a new backup. (No more write existing backup.)
  
  My goal is to do a daily backup without replacing existing backup automatically.
  
  Thank you

  Hello

  hope this helps

  http://DBA.ipbhost.com/index.php?showtopic=804

  Concerning
  Mozka

• Adds data to the binary file as concatenated array

  Hello

  I have a problem that can has been discussed several times, but I don't have a clear answer.

  Normally I have devices that produce 2D image tables. I have send them to collection of loop with a queue and then index in the form of a 3D Board and in the end save the binary file.

  It works very well. But I'm starting to struggle with problems of memory, when the number of these images exceeds more than that. 2000.

  So I try to enjoy the fast SSD drive and record images in bulk (eg. 300) in binary file.

  In the diagram attached, where I am simulating the camera with some files before reading. The program works well, but when I try to open the new file in the secondary schema, I see only the first 300 images (in this case).

  I read on the forum, I have to adjust the number of like -1 in reading binary file and then I can read data from the cluster of tables. It is not very good for me, because I need to work with the data with Matlab and I would like to have the same format as before (for example table 3D - 320 x 240 x 4000). Is it possible to add 3D table to the existing as concatenated file?

  I hope it makes sense :-)

  Thank you

  Honza

  • Good to simulate the creation of the Image using a table of random numbers 2D!  Always good to model the real problem (e/s files) without "complicating details" (manipulation of the camera).
  • Good use of the producer/consumer in LT_Save.  Do you know the sentinels?  You only need a single queue, the queue of data, sending to a table of data for the consumer.  When the producer quits (because the stop button is pushed), it places an empty array (you can just right click on the entry for the item and choose "Create Constant").  In the consumer, when you dequeue, test to see if you have an empty array.  If you do, stop the loop of consumption and the output queue (since you know that the producer has already stopped and you have stopped, too).
  • I'm not sure what you're trying to do in the File_Read_3D routine, but I'll tell you 'it's fake  So, let's analyze the situation.  Somehow, your two routines form a producer/consumer 'pair' - LT_Save 'product' a file of tables 3D (for most of 300 pages, unless it's the grand finale of data) and file_read_3D "consume" them and "do something", still somewhat ill-defined.  Yes you pourrait (and perhaps should) merge these two routines in a unique "Simulator".  Here's what I mean:

  

  This is taken directly from your code.  I replaced the button 'stop' queue with code of Sentinel (which I won't), and added a ' tail ', Sim file, to simulate writing these data in a file (it also use a sentinel).

  Your existing code of producer puts unique 2D arrays in the queue of data.  This routine their fate and "builds" up to 300 of them at a time before 'doing something with them', in your code, writing to a file, here, this simulation by writing to a queue of 3D Sim file.  Let's look at the first 'easy' case, where we get all of the 300 items.  The loop For ends, turning a 3D Board composed of 300 paintings 2D, we simply enqueue in our Sim file, our simulated.  You may notice that there is an empty array? function (which, in this case, is never true, always False) whose value is reversed (to be always true) and connected to a conditional indexation Tunnel Terminal.  The reason for this strange logic will become clear in the next paragraph.

  Now consider what happens when you press the button stop then your left (not shown) producer.  As we use sentries, he places an empty 2D array.  Well, we dequeue it and detect it with the 'Empty table?' feature, which allows us to do three things: stop at the beginning of the loop, stop adding the empty table at the exit Tunnel of indexing using the conditional Terminal (empty array = True, Negate changes to False, then the empty table is not added to the range) , and it also cause all loop to exit.  What happens when get out us the whole loop?  Well, we're done with the queue of data, to set free us.  We know also that we queued last 'good' data in the queue of the Sim queue, so create us a Sentinel (empty 3D table) and queue for the file to-be-developed Sim consumer loop.

  Now, here is where you come from it.  Write this final consumer loop.  Should be pretty simple - you Dequeue, and if you don't have a table empty 3D, you do the following:

  • Your table consists of Images 2D N (up to 300).  In a single loop, extract you each image and do what you want to do with it (view, save to file, etc.).  Note that if you write a sub - VI, called "process an Image" which takes a 2D array and done something with it, you will be "declutter" your code by "in order to hide the details.
  • If you don't have you had an empty array, you simply exit the while loop and release the queue of the Sim file.

  OK, now translate this file.  You're offshore for a good start by writing your file with the size of the table headers, which means that if you read a file into a 3D chart, you will have a 3D Board (as you did in the consumer of the Sim file) and can perform the same treatment as above.  All you have to worry is the Sentinel - how do you know when you have reached the end of the file?  I'm sure you can understand this, if you do not already know...

  Bob Schor

  PS - you should know that the code snippet I posted is not 'properly' born both everything.  I pasted in fact about 6 versions here, as I continued to find errors that I wrote the description of yourself (like forgetting the function 'No' in the conditional terminal).  This illustrates the virtue of written Documentation-"slow you down", did you examine your code, and say you "Oops, I forgot to...» »

• Computer laptop G62 crashed and now it gives error "unable to open because of the recent hardware or software error"

  I have a new problem with my PC. My laptop suddenly crashed. It was working fine before this, but while I was watching a movie, it's just off. I tried to restart but it gave me the error that it cannot open because of software or a hardware error. It gives me two options: 1. to try the Startup Repair tool. 2. to open Windows normally.

  I tried to open it normally, but it redirects me to startup repair. The Startup Repair is unable to do anything.

  =================================================================================

  Startup Repair can try to restore your computer to an earlier point in time when it worked correctly.

  This repair will not personal data change, but it can remove some programs that have been installed recently. You can't undo this restoration.

  =================================================================================

  Then I tried to restore my PC to a previous restore point, but it won't let me continue once I've selected a point. It only shows my C drive which is grayed out so I can't select and continue. It gives me a yellow warning saying that the Protection of the system disk must be enabled.

  So as the restoration is not an option, I went to the recovery of the system where it will restore my factory settings, deleting all data. The problem is that I have a lot of valuable data in the PC, so I don't want to do this before you have a back-up. I tried to make the back-up, but the first back-up was arrested at 78%. The second he stopped at 13%. After that all other attempts to create a backup stops at 25%.

  I don't understand what to do. People say it's a problem with Windows 7 (64-bit). I don't have a Windows 7 CD either because it was pre-installed when I brought. I have an original CD of Windows Vista so I'll try to install first. Then, I'll try to copy my data and then restore my laptop to its factory settings. I hope this works.

  A guy suggested to replace the names of readers. So I reversed the C drive and D drive. He showed me all the readers in the restore option. But the restore has failed. Then he renamed automatically drives to their original state. I even ran sfc/scannow, but it shows me that a scan is planned and restart the PC to start. But when I reboot, it gives me the same thing again.

  Please suggest what to do...

  I installed Windows Vista professional from the CD. It worked perfectly... I want to say that I was able to retrieve all my data because it stored in a folder called Windows.Old

  But since I could not the wifi adapter and integrated graphics card Intel to work on the PC, I tried to restore factory settings. It doesn't let me access the Recovery Manager by pressing F11 on reboot I went to the computer icon and right-click on it. I selected manage and made my recovery disk a partition active. So after reboot it properly started the Recovery Manager. Right now I'm it back to factory settings. I'll let you know what happens after that. My data is safe, but I don't know if I'll be able to load my original OS.

• has had to change the password; Unable to add music to the playlist; can't burn music on the disc.

  problems with iTunes.  Failed to add songs to the playlist. can't burn music on the disc; Message (wait 90 days for download purchases). another received message (unauthorized;  "I have not authorized and renewed). Did not help.

  I have 2 iPads, 1 iPhone and iPod touch, so I need iTunes to synchronize. I'd like a different music player.

  Hello

  The problems you describe can be caused by outdated software.

  Make sure that iTunes and OS X are up-to-date.

  On your open the App Store, and select updates from the menu.

  On your iOS devices, tap settings > general > software update