Error with database adapter
Hi all
I use a data adapter to write values to the database. The build succeeded. However, when I test it in the console with the entry sameple I get the below error.
ERROR:
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: customer from SOAP server error: Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). NGW_PP_DBAdapter:Write_DB_Adapter [Write_DB_Adapter_ptt::insert (StgProductportfolioCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > liaison component JCA is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/DB_Conn. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml was not defined in eis/DB/DB_Conn. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource.
Can someone help me fix this error.
Thanks in advance.
Error, it is clear that your composite is not able to find the jndi of DB. The Binding of JCA component is unable to startup the adapter resources specified in the
Please follow these steps:
(1) have created DB DB/ist/DB_Conn jndi you use on weblogic console.
(2) after you have created you redeploy the DB adapter to weblogic console.
(3) If you did above 2 steps cross check your jndi exists in your DB adapter or not on weblogic console.
Who could be the possible causes of the error you are getting.
I hope this helps.
Kind regards
Karan
Tags: Fusion Middleware
Similar Questions
-
Insert tables from database Master_detail_detail web form with database adapter
Hi all
I have a web form of my payload that contains the business as master_detail_detail objects
data association I map object [] as input to the collection service and be used to iterate it using "copy list", it works fine when I master_detail relationship and save on db correctly but when I card retail and events in a way even with the error:
LIAISON. JCA-12563
Exception occurred when the link was invoked.
Exception occurred during invocation of the JCA binding: "JCA binding run reference operations"insert"has no reason of: no mapping not found Exception.»
The descriptor [class dbReference.Mosavabe] [eghdamMosavab] mapping is not found. The input xml record was an element [Soratjalse/Mosavabe/eghdamMosavab].
Most likely the wrong xml input variable (does not not to the xsd expected) was adopted at this invoke.
Make sure that the input xml file is valid compared to the xsd and the mapping exists in the Mappings.xml. If an older version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the application server. If the same descriptor is described in two separate Mappings.xml files, make sure that both versions include this attribute and mapping.
".
The called JCA adapter threw an exception of resource.
Please review the error message above carefully to determine a resolution.
relationships are 1 to many so I want to have the number of records in detail
I found the problem...
When we want to use complex associations that contains a lot of detail table, must use the XSL transform that placed in the top right corner in the implementation of data binding.
This feature uses a for card auto xsl Editor.
more explanations in the development chapter 5 book
-
Problem with database adapter serivce
Hello
I'm working on a project where we have a service of routing and database adapter service. The interface worked great until we have included the parmameters (attributeFormDefault = "unqualified" elementFormDefault = "qualified") in routing service xsd. After we have updated the service of routing with these settings, it has stopped working, the BSE is simply greyed out without raising any error message.
I tried all possible ways (recreated the services / removed from BSE and registered them again) but nothing seems to work.
Any suggestion?
Thank you
AnilJDeveloper with SOA included 10.1.3.1.0 elementFormDefault = "unqualified" in the generated XSD. This has been changed to 10.1.3.3.0 to "qualified" so if you have a 10.1.3.1 JDev and you use SOA 10.1.3.3 (or 10.1.3.4) you will encounter problems (usually of namespace issues) because the two are incompatible. The solution is to synchronize your JDev and SOA with the same version. You can mix with 10.1.3.4 10.1.3.3, but you cannot use 10.1.3.1 with both versions.
-
Hello
I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.
I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.
I see that it points to the host name in listener.ora.
Attached the screenshot
Can someone help me solve this problem?
Thanks in advance
What he says is the listener.ora file is not necessary to start the listener. If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.
I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.
So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.
-
I had a project with business services to OSB using JCA adapter Service, after that I inactivated the data source to do business unit tests, the following error started to appear. I've recreated the data source, the data adapter configuration and reinstalled it the database adapter with no luck, still the same error stating: java.lang.IllegalStateException: Cause already initialized
changed the < java: alsb-jca-framework-adapter-debug > true < / java: alsb-jca-framework-adapter-debug > in the file alsbdebug.xml but the onlly is indicated in the trace log:
# < 11 May 2011 18:38:22 GMT - 04:30 > < error > < JCATransport > < sapl953 > < osb_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< ac651b1b82eb3313:-2f05eee:12fe1116dce: - 7fff - 0000000000000128 > < 1305155302965 > < BEA-381967 > < check call JCA failed with the error in the application , exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: java.lang.IllegalStateException: Cause already initialized
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: java.lang.IllegalStateException: Cause already initialized
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:155)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
to com.bea.wli.sb.transports.Util$ 1.invoke(Util.java:83)
to $Proxy133.sendMessageAsync (Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:597)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
to com.bea.wli.sb.stages.StageMetadataImpl$ WrapperRuntimeStep.processMessage (StageMetadataImpl.java:346)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:593)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:591)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:329)
to com.bea.wli.sb.test.service.ServiceMessageSender.access$ 000 (ServiceMessageSender.java:76)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:134)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke (unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: java.lang.IllegalStateException: Cause already initialized
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:263)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
to com.bea.wli.sb.transports.Util$ 1.invoke(Util.java:83)
to $Proxy133.sendMessageAsync (Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:597)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
to com.bea.wli.sb.stages.StageMetadataImpl$ WrapperRuntimeStep.processMessage (StageMetadataImpl.java:346)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:593)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:591)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:329)
to com.bea.wli.sb.test.service.ServiceMessageSender.access$ 000 (ServiceMessageSender.java:76)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:134)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke (unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.IllegalStateException: Cause already initialized
at java.lang.Throwable. < init > (Throwable.java:67)
at java.lang.Throwable.initCause(Throwable.java:270)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:361)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:316)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:359)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:257)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
to com.bea.wli.sb.transports.Util$ 1.invoke(Util.java:83)
to $Proxy133.sendMessageAsync (Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:597)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
to com.bea.wli.sb.stages.StageMetadataImpl$ WrapperRuntimeStep.processMessage (StageMetadataImpl.java:346)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:593)
to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:591)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:329)
to com.bea.wli.sb.test.service.ServiceMessageSender.access$ 000 (ServiceMessageSender.java:76)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:134)
to com.bea.wli.sb.test.service.ServiceMessageSender$ 1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke (unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Caused by: java.lang.IllegalStateException: Cause already initialized
at java.lang.Throwable.(Throwable.java:67)
at java.lang.Throwable.initCause(Throwable.java:270)The stacktrace info & shows error that the initCause() of the java.lang.Throwable class method has already been called on this throwable or this machine was created with Throwable (Throwable) or Throwable (String, Throwable). Please raise a case with care, because it may be a bug in the product as well.
Kind regards
Anuj -
Deploy the error because the sql server database adapter
I'm new to BEPL, I tried to transfer data from the Oracle SQL Server. To establish a connection with sql server, I used database adapter and driver is MS JDBC 2.0 that works very well in Jdeveloper and compiled with success but everything by deploying a Jar file to the output folder in SOA server I am getting an error, below is this error message
Deploy the new BPEL process
• bpel_WhiToEbiz_v2009_10_27__45671.jar failed to deploy.
Could not initialize the agent of activation. An error occurred during initialization of an activation of process agent "WhiToEbiz", "v2009_10_27__45671" for review. Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor. oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
kindly help me someoneAs stated on the http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_db.htm#CHDCAEGH, section "4.6.7 location files JAR JDBC Driver and setting the path of the class ' drop the JAR files in the following directories:
For the Oracle BPEL Process Manager, go to Oracle_Home/bpel/system/appserver/oc4j/j2ee/home/applib
For the Oracle BPEL Process Manager to install the OracleAS middle tier, go to Oracle_Home/j2ee/OC4J_BPEL/applib
As a practice you need to create the factory of conn, conn on server and source database...
-
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
Error opening database with DevAlphaC
I have a database that I use for logging. It is created in c + c++ / Qt and working properly.
On the page of logs (in qml) I use a simple GroupDataModel with a data source to display the contents of the database.
The Z10 and AlphaA/B, it works, but gives warning of debugging on a connection that is duplicated (I have ignore, that I was not able to solve the problem).
On the DevAlphaC however the database cannot be opened QML, and the name of connection in the error message seems strange.
Warning: 11:53:02.613 SqlDataAccess error: "unable to open new database file "/accounts/1000/appdata/com.xxx/app/native/assets/accounts/1000/appdata/com.xxx/data/logs.db"" . QSqlError::type= "QSqlError::ConnectionError" , QSqlError::number= -1 , databaseText= "unable to open database file" , driverText= "Error opening database"
As you can see, the path is used twice.
To set the path, I use a property:
source: loggerService.dbPath
I connect the return value of the property, and it shows the correct path (not suprprising, as the database is created with this path and is filled with all the journal reports):
Debug: 11:53:02.487 getDbPath() dbPath "/accounts/1000/appdata/com.xxx/data/logs.db"
When I compare newspapers of the Z10 and the DevAlphaC warning against the "duplicate connection" shows the correct on the Z10 path, but the double-path-name of one on the DevAlphaC
Someone saw something like that already?
have solved it by adding "file:///" the absolute path. works with the DevAlphaC and Z10, so I'll use it.
-
Error with Service Agreement using the Siebel EAI adapter
Hi all
Thanks in advance.
I am facing following error with Service Agreement using Siebel EAI transaction.
Error service call "adapter of Siebel EAI', 'Upsert' method in 'Contract Upsert' step. (SBL-RPR-00162) - method 'AssocCurrentRow' of the business component "Internal Division" (integration component "Agreement_Organization Service") for recording with search specification ' [name] = "ABC we ' ' returned the following error:"the selected record has been deleted by another user since it was recovered. Please continue. (SBL-DAT-00494) "(SBL-EAI-04451)"
Previously, we used to create agreements with sync transaction EAI with ID "User1" that has "ABC we ' as an organization. Now, we moved the EAI Async transaction. Even if we use "User1" to trigger transaction because it is asynchronous recording of the agreement is created using SADMIN user who has a different organization. To set the good organization, we have added the IC of the IO organization and the sending of the Organization as "ABC we.
I guess, at the time of the transaction, the Organization "ABC we ' which is defined using IC is removed as siebel tries to define the Organization agree with the SADMIN organization.
Please help me solve this problem.
Kind regards
Vincent
Hello
Please consult the following
Get the error of SBL-DAT-00494 with an organization (Doc ID 2053260.1)
SBL-DAT-00500 SBL - EAI - 04451 when there is 10000 or more records using the Web Service based on the Siebel EAI or EAI UI (Doc ID 979262.1) adapter
-
11g Exchange Connector: error with 2003 mailbox databases
Hello
I installed 11g Exchange Connector in OIM 11 g R2 server. I ran successfully the work of "Exchange User Mailbox Database group search reconciliation" and the recon-ed a mailbox for a specific user account (mailbox Exchange 2010) by using the "target user reconciliation resource Exchange".
But the fun stops there, when I try to run the work of 'Target resource Exchange remove user reconciliation', I get the following error (see #1) in the result. I have no new event in Event Viewer. When I check the connector server I see a similar error (see #2). I tried to manually run the powershell command with the user of the connector server and it works correctly (see #3).
The problem seems to be related the Exchange 2003 mailboxes, since when I try to recon a box the mailbox for a user with a mailbox of 2003, I get a similar error of "database" could not be found Here again, if I check the same user using the service account, I can get his mailbox.
No idea what could be the problem? All debugging more I can try?
Thank you
H4. #1-in the result of the scheduled task:
org.identityconnectors.framework.common.exceptions.ConnectorException: problem when executing PowerShell Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: could not find database "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque. Make sure that you have typed it correctly.
to Org.IdentityConnectors.Exchange.RunSpaceInstance.CheckErrors (IList errors)
to Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (Controls Collection 1)
at Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (point of order)
Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
H4. #2-in the connector server log:
30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeConnector, the-> CreateFilterTranslator method, the Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> CreateFilterTranslator method, the Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeConnector,-> ExecuteQuery method, Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl,-> ExecuteQuery method, Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> cmd poll Get-Mailbox
30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> output of the method
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> method entered
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> PowerShell command: Get-Mailbox
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value IgnoreDefaultScope:
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value ReadFromDomainController:
30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value ResultSize: unlimited
ConnectorServer.exe error: 0: Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: problem when executing PowerShell Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: could not find database "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque. Make sure that you have typed it correctly.
to Org.IdentityConnectors.Exchange.RunSpaceInstance.CheckErrors (IList errors)
to Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (Controls Collection 1)
at Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (point of order)
Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
to Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.SearchUser (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options, ObjectClassInfo ocInfo)
to Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.ExecuteQuery (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options)
to Org.IdentityConnectors.Exchange.ExchangeConnector.ExecuteQuery (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options)
to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.RawSearcherImpl'1.RawSearch (search for SearchOp 1, ObjectClass, filter oclass, Manager of ResultsHandler, OperationOptions options)
to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.RawSearcherImpl'1.RawSearch (object search, oclass ObjectClass, filter, ResultsHandler Manager, OperationOptions options)
to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.SearchImpl.Search (ObjectClass oclass, filter originalFilter, Manager of ResultsHandler, OperationOptions options)
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args)
to ___proxy1. Search (ObjectClass, filter, ResultsHandler, OperationOptions)
to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (OperationRequest request)
DateTime = 2013-05-30 T 14: 49:37.1880494Z
H4. #3-Powershell using the service account
Get a 2003 database
[PS] C:\Windows\System32 > Get-MailboxDatabase "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque.
Name server recovery ReplicationType
Store to the letter... Fake of the ELM COURT no
Get a 2003 mailbox
[PS] C:\Windows\System32 > Get-Mailbox-filter "DisplayName - eq 'Merchant Robert 0'"
Name Alias ServerName ProhibitSendQuota
marchanr marchanr Elm Court unlimited
Published by: SG on May 30, 2013 11:57
Published by: SG on May 30, 2013 13:41We have solved this problem: the service account was missing certain privileges of reading on the tree of Exchange 2003. We have added the 'read' and 'show info store' privileges on the tree of Exchange 2003, restarted the server connector and now it seems to work.
-
Problem with the selection of database adapter operation
Hello
When I invoke the database adapter selection operation, I don't see not all the fields within Invoke1_SelectSelect_InputVariable (I'm supposed to see mapping). Can someone let me know what the problem is. Currently I read a value and if the input value is equal to the value of the field in view he must retrieve all the values associated with this field.
Thank youSelect empno, empid of base table WHERE empno = #empno_value
empno_value will be the parameter that you intend to move through a field of the input variable...
-
Original title: I am trying to connect to my WiFi.
I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.
Hello
Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will definitely help you with this.
To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
1 have you ever done any recent hardware or exchange of software on your computer before the show?
2. What is the brand and model of the computer?
Method 1:
Follow the steps in the link below.
Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
Method 2:
Follow the steps in the link below.
Using the troubleshooter from network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 3:
Follow the steps in the link below.
How can I troubleshoot network card? :
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Hello
Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.
And if I "try access the Cloud Console ASM instances will fail with this error:"
IO error: the network adapter could not establish the connection
The connection descriptor has been
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)
(PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))
My env is:
Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)
Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)
Someone knows how to solve this problem?
Thank you very much!
Arturo
(1) what is the user id you are using OEM fior?
The user id should have Sysdba and should not be in the role SYSASM.
(2) in order to check your port
In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.
Summary of endpoints listening...
(Check that the PORT and IP information is correct)
Instance '+ ASM1' READY State, has 1 operation for this service...
(3) in addition, connect to asm and check the connection
Show u local_listener and entered into OEM parameter details are correct.
(4) OEM, I think you add Cluster_ASM.
Oracle_home_path--> you're grid House
username--> with sysdbarole
--> Sysdba role
Cluster_name--> $GRID_HOME/bin/cemutlo - n
Service name--> + ASM
ADD
NAME: INSTANCENAME
-Home: HOST1
listener_HOST-->< show="" parameter="" local_listener=""> > exit
PORT-->
SID- + ASM1
Concerning
Krishnan
-
Database adapter &; mediator, called by the Service causes exception?
Hello
I have a database adapter, a mediator plugged in my composite.xml. In my BPMN process, I have a service that uses the Ombudsman as its implementation (?). He was able to build and deploy great of JDeveloper. But now that I am trying to execute the process of the workspace, I get this error:
< 13 may 2014 12:58:13 PM PDT > < WARNING > < oracle.soa.adapter > < BEA-000000 > < JCABinding = > JCABinding = > search for DBTestComposer2:DBAdapter [DBAdapter_ptt::DBAdapterSelect(DBAdapterSelect_inputParameters,TestTableObpmCollection)] "ÉI/DB/cpdev_users" failure due to JNDI: unable to resolve ' ist. DB.cpdev_users'. Solved ' ist. DB' >
< 13 may 2014 12:58:13 PM PDT > < error > < oracle.soa.adapter > < BEA-000000 > < JCABinding = > DBTestComposer2:DBAdapter [DBAdapter_ptt::DBAdapterSelect(DBAdapterSelect_inputParameters,TestTableObpmCollection)] could not invoke "DBAdapterSelect" against the "null" operation due to:
LIAISON. JCA-12511
JCA Binding Component connection problem.
JCA Binding component is unable to create an outgoing connection of JCA (CCI).
DBTestComposer2:DBAdapter [DBAdapter_ptt::DBAdapterSelect (DBAdapterSelect_inputParameters, TestTableObpmCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. JCA-12510
Location of JCA resource adapter error.
Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / >
The Binding of JCA component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/cpdev_users.
The reason is most likely to be
(1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or
(2) the "< jndi name >" element in weblogic - ra.xml has not been defined in eis/DB/cpdev_users. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR).
Please fix this and then restart the application server
Please ensure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections.
Could someone explain what this means? (Sorry, we're new on Oracle technology and a lot of this terminology). What resource adapter RAR files is this allusion? We would really appreciate solutions on how to fix or solve this problem!
I think this might solve your problem: https://community.oracle.com/message/10235476#10235476
Dan
-
Failed to retrieve system Data Error with Essbase
Hi all
I get an error connecting to the target, Essbase system, indicating that 'impossible to recover the data of the target system.' Here are the specs of my installation:
FDM - 11.1.2.2
Essbase - 11.1.2.2
OS - Windows Server 2008 R2 64-bit Windows
SQL - 2008 R2
FDM adapter - ESS11X64-J
I've tried several things:
(1) adapter saved again
(2) check the parameters for integration-
(a) machine profile - all going ot the same machine, which means Essbase and FDM are installed on the same machine. This is a dev box.
(b) Essbase Integration - app Essbase, db name, method of connection 2-Global = Essbase and the configuration of the dimensions to match exactly with my Essbase cube. I tried with and without the domain name, but not luck.
(c) size - make sure that mirror my Essbase cube Dimension names. Active checked, use the list and the value label for each Sun
(3) checked RTC Essbase
People advice? Thanks in advance!
Here is the error I get:
* Start Oracle Hyperion FDM
Essbase Runtime error log entry adapter [2013-06-29-17: 46:51] *.-------------------------------------------------------------
Error:
Code of... 10404
Description... Proceedings of Essbase API: Code [EsbInit] cast: 1030803.
Process... clsHPConnection.fConnect
The component... upsES11XG4J
Version... 100
Wire... 6364
Identification:
User... hypadmin
Name of the computer... HYP11122
Essbase connection:
Name of the application... Totam
Name of the comic... Finance
Name of the server... HYP11122
Connect status... No open connection
* Start the journal entry for the Runtime Error FDM [2013-06-29 17:46:52] *.
-------------------------------------------------------------
ERROR:
Code............................................. 10404
Description... Proceedings of Essbase API:
[EsbInit] Throw code: 1030803.Online: 124
Process... clsBlockProcessor.ActConnect
The component... upsWBlockProcessorDM
Version.......................................... 1112
Thread........................................... 3284
IDENTIFICATION:
User... hypadmin
Name of the computer... HYP11122
App Name......................................... FDMLL
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Database server... HYP11122
Name of the database... HYP_FDM_LL
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location......................................... Sample
Location ID... 748
Location Seg... 2
Category......................................... WLCat
ID of the category... 12
Period........................................... Jun - 2013
Period ID........................................ 30/06/2013
POV Local........................................ Fake
Language......................................... 1033
User Level....................................... 1
All Partitions... True
Is Auditor....................................... Fake
* Start the journal entry for the Runtime Error FDM [2013-06-29 17:46:52] *.
-------------------------------------------------------------
ERROR:
Code............................................. 10404
Description... Proceedings of Essbase API:
[EsbInit] Throw code: 1030803.Online: 124
Procedure........................................
clsBlockProcessor.DimensionListThe component... upsWBlockProcessorDM
Version.......................................... 1112
Thread........................................... 3284
IDENTIFICATION:
User... hypadmin
Name of the computer... HYP11122
App Name......................................... FDMLL
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Database server... HYP11122
Name of the database... HYP_FDM_LL
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location......................................... Sample
Location ID... 748
Location Seg... 2
Category......................................... WLCat
ID of the category... 12
Period........................................... Jun - 2013
Period ID........................................ 30/06/2013
POV Local........................................ Fake
Language......................................... 1033
User Level....................................... 1
All Partitions... True
Is Auditor....................................... Fake
* Start the journal entry for the Runtime Error FDM [2013-06-29 17:46:52] *.
-------------------------------------------------------------
ERROR:
Code...-2146817884
Description... Proceedings of Essbase API:
[EsbInit] Throw code: 1030803.Online: 124
Procedure........................................
ObjScriptReturnMarshaler.GetDimensionListIDENTIFICATION:
User... hypadmin
Name of the computer... HYP11122
App Name......................................... FDMLL
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Database server... HYP11122
Name of the database... HYP_FDM_LL
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location......................................... Sample
Location ID... 748
Location Seg... 2
Category......................................... WLCat
ID of the category... 12
Period........................................... Jun - 2013
Period ID........................................ 30/06/2013
POV Local........................................ Fake
Language......................................... 1033
User Level....................................... 1
All Partitions... True
Is Auditor....................................... Fake
I changed the environment variables and got to work.
ESSBASEPATH
C:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0
PATH
C:\Oracle\Middleware\EPMSystem11R1\bin-32; C:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\Bin; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin; C:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client\32bit; C:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client; C:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common\32bit; C:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common; C:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\; C:\Oracle\Middleware\ohs\bin; C:\Oracle\Middleware\ohs\opmn\bin; C:\Oracle\Middleware\ohs\opmn\lib; C:\Oracle\Middleware\ohs\perl\bin; C:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.1\Drivers; C:\Oracle\Middleware\EPMSystem11R1\opmn\bin; C:\Oracle\Middleware\EPMSystem11R1\opmn\lib; C:\Oracle\Middleware\EPMSystem11R1\perl\bin; C:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers
Thanks for your response!
Maybe you are looking for
-
As 7612: 7612 OfficeJet printer fails to update
Hello I have an officejet 7612, who continues to try to update web served before eprint and apps. He tries to update, fails with a message from the white screen of restart. It of now happening every day and is getting really boring. I can't stop him
-
How to install the dynamic disk volume and base set
I have 500 GB of HARD drive. How can I convert a 1 and 2 in basic and volume 3 in Dynamics. Please tell me something that is free of cost, and I don't want to use a software to do this.
-
BlackBerry App Blackberry Email
Hey there, I was wondering if someone can answer a question for me. On my old BlackBerry "BOLD", I got an address from e-mail specifically for my phone, but I see with the Z10, it is not supported? Why is this, and this is something that will change?
-
HOW Timestamp()->; simpledateformat()?
Hi community I am looking for best practices convert 'tim' (Java instructions below) in milli-seconds (since midnight 1970) human readable Date time &. I know pretty much on SimpleDateFormat() but don't know how to implement it. If anyone knows or ca
-
Hello I'm looking for Windows 8 Microsoft's official tutorials. I can't find the Windows.com so I wonder if anyone of you know were I can watch some. Thank you.