ErrorCode DAMmx8.7.2 property Scale-50352 memory allocate error?

Similar Questions

• Satellite Pro A100 - NMI memory parity error parity check

  Sometimes I get this BSOD error during 2 months.
  Hardware malfunction call your provider for support NMI: Parity Check / Memory Parity Error * the system stopped *.

  It can occur if the laptop is asleep, or even refreshing a screen save or Stand-By condition.
  Model PSAAPE - 00s00KEN 2 GB installed. I checked that the memory is installed correctly. It's a laptop very clean with no dust clutter things. Aside from the Ram "goes wrong" and developing a fault, can anyone suggest another cause? It doesn't seem to be an obvious solution to this problem on a forum I've seen so far. Maybe it's my RAM that fails (but it seems to do it when he is not be underlined!) It could be the video drivers... who knows? I hope somebody.

  Hello!

  In your case, I would check the RAM, I think that's the problem.

  You can do this with Memtest86:
  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  Good bye

• Satellite P200 - Parity Check / Memory Parity Error

  Hi all experts!

  After updating a driver, I get this above mentioned message.
  + Message ' hardware malfunction NMI Parity Check / Memory Parity Error.

  But just at the moment where the P200 falls in sleep mode. I can't wake up and have to do a hard reboot. Windows is starting and works perfectly and everything seems to be okay!

  Any idea?

  Thanks in advance!
  YB

  Hello

  This behavior can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  I think that you should remove the driver updated or installed first.
  If this does not work, test the laptop with preinstalled system cool.

  Finally if this is insufficient, a hardware malfunction might be possible.
  In this case the RAM modules need to be tested as the first part.

• Photosmart HP5520: 5520 HP Photosmart Memory Card Error

  My Photosmart HP5520 will print from my IPhone and IPad wireless, however, on the touch screen memory card error appears saying "memory card error. Please remove the memory card. There is no memory card in the machine and I tried to unplug and disconnect when turned on several times. Can anyone help please?

  Hi @Bunters73,

  Welcome to the HP Forums!

  I see you found the error, "memory card error. Please remove the memory card. "With your printer Photosmart HP 5520. I'm happy to help you!

  Please try an another hard reset, as described in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Then I would try to make sure that the firmware in the printer is up-to-date. Get updates of the printer.

  If this does not resolve your problem, then the printer may need to be repaired / replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• memory card error

  My HP photosmart D110a continues to display a message on the display panel "memory card error".  During this time the display panel cannot be used.  On my computer the HP Solution Center window keeps poping up (annoying) with the message "error on the map".  Printing is also most of the time impossible.  Can you advise?

  I reinstalled the software from the computer and the problem was solved.

• OfficeJet pro 8600: officejet pro 8600 memory card error - any inserted memory card

  I am connected directly to my Lenovo Thinkpad laptop and I can print, but I can't copy, scan or fax. The touchpad display memory card error. It is plugged into a wall outlet and I did a hard reboot.  Not sure if my Windows 7 is 32-bit or 64-bit.

  I don't see any private messages.

• Analog output PCI-6251-DAQ-200016 memory overflow error

  NI PCI - 6251 DAQmx, AIMD-752 motherboard, dual core processor, a lot of speed and the ram running WinXP Pro & LabWindows/CVI

  get DAQ-200016 memory overflow error when I try to generate a signal of analog output with a rate higher than about 32 000 samples/second (?)

  going on what?  I have never seen it before.   Is this a problem with the motherboard?    "It's the same product on the CVI code example" \Cont Gen Volt Wfm - Int Clk\ContGen - IntClk.cws.

  If someone has had this problem, and is there a solution?

  Thank you

  PS: full text of the message reads:

  Measurements: On-board memory precision passing. Due to the limitations of system and/or the bandwidth of the bus, the driver could not write data to the device fast enough to track the rate of output of the device.  Reduce your sampling rate, change the method of transfer of data (from interruptions on DMA), use a product with more on-board memory or reduce the number of programs that your computer runs simultaneously. Task name: _unnamedTask<1> Code of State:-200016

  Well, I found my answer.   For later use, Olivia NI Apps Engineering suggested I have change the mechanism of data transfer by this Knowledge Base document:

  http://digital.NI.com/public.nsf/WebSearch/C326F7D33CA6DB0E86256DFE008043B7?OpenDocument

  ... so I inserted the line of code between the creation of the area of OCCUPANCY of the channels and set up the example of clock calendar.

  DAQmxCreateAOVoltageChan( ...
  
  DAQmxSetAODataXferMech(TaskHandle,chan,DAQmx_Val_Interrupts);
  
  DAQmxCfgSampClkTiming(...
  

  now, I am able to generate output to a 2.35 MS/sec... max sampling frequency not quite the 2.86MS / sec indicated in the specification 6251, but close enough that I'll stop complaining

  

• printer all-in-one memory card error Photosmart C6180

  Photosmart C6180 all-in-one printer, xp computer

  When I insert a 4 GB SDHC card in the SD slot + printer and

  When I insert a SDHC 16 GB card in the SD slot +, two cases, the error "memory card error" appears on the printer screen.

  The HP digital imaging monitor displays the error "no images on the card.

  How can I correct the mistake of the printer software.

  Hello

  No, it isn't, when the device was built there were that many more 1 GB card and they were still quite expensive.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• Pavilion DV2000 - NMI: parity check / memory parity error

  My laptop was working fine and all of a sudden I got this blue screen with this message:

  Hardware malfunction
  Call your provider of support material
  NMI Parity Check / Memory Parity Error
  The system is shut down

  I have try the recovery disk and the computer back to its factory setting. It will be fine for about a day and then the blue screen light up again. I have try that 3 times now with no luck.

  Can someone please? I'm getting really annoyed that I run my business using my computer every day and I can't continue to recover and reinstall everything every two days.

  The laptop has 150 GB of memory with two 1 GB of Ram.

  What do you mean by delete a module?

  The computer cannot even load into the window before it crashes with blue screen.

  * Just realized there is the notebook section. I have post the same problem on this article and close this one here *.

• nVidia Driver Update: "Invalid access to memory location" error

  Recently, I noticed that nVidia had updated the drivers for my GeForce 440. When I tried to install, I got an "invalid access to memory location" error and the installation failed. I thought that I still had operational drivers, then I would understand later.

  Three nights ago Windows Update took on himself to try the update for me. He uninstalled the driver with success (which I didn't have to do it because of the above error), but has no installation. Following manuals to install attempts have also failed.
  Looking at the window control panel programs and features shows that older drivers seem to be installed, but don't work do not. Also, attempts to uninstall fail with the same error.
  Because I reinstalled Vista during the summer, and made no significant changes since then, I don't have a system restore point. Careless of me, I know, but that's it.
  Is it possible to solve this problem short even after reinstall Vista or should I resign myself to a day and a half of reupdates?

  Hello SudroBrown II,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it looks that you are having problems with the Nvidia graphics card. "As I understand it, you get an error message" invalid access to memory location "when you install drivers Nvidia GeForce 440.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the graphics card or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How can I fix "memory parity error" - a hardware malfunction?

  My video display keeps going out and lose pixels.  Occasionally, I get an error message "memory parity error" and "malfunction of equipment."  -What it means and I can fix it?

  You forgot to give us information on your computer, so all I can give you is general advice.

  1. in the case of a desktop computer, connect it to another monitor. If all goes well, replace the original monitor. If the problem persists when connected to the test screen, replace your video card.

  2. in the case of a laptop computer, contact technical support of computer mftr... There is a hardware problem, probably with the video chip, which you can't fix yourself. MS - MVP - Elephant Boy computers - don't panic!

• MD3000 Raid Controller Module memory parity error

  MD3000 has two controllers. One of the controller does not have. SO I replaced it with a used controller, without work. All errors are gone, except a "RAID Controller Module memory consistency error".

  Recovery Guru recommends steps that I followed without success.

  Need help in this forum.

  Paul

  Hello Paul,

  What you need to do is on the replacement controller to pull the raid battery and wait about 2 minutes then reinsert it again. Also I want to try to do is to Flash the firmware on the system as well.

  Please let us know if you have any other questions.

• error message "memory card error" with a SD card on C5180

  Photosmart C5180 displays 'memory card error' when SanDisk SDHC inserted.  (The map is not damaged, it is new & working behind closed doors).  I was not successful in finding answers on the HP site.  Any help most appreciated.  Thank you very much.

  Looking at the specifications, I see memory 'High Capacity' (SDHC) is NOT supported on the device:

  http://support.HP.com/us-en/document/c00701803

  I also checked with our group in San Diego - SDHC is not supported.

  ~ TechHelper7

• 32 GB SDHC on OfficeJet Pro 8600 Plus memory card error

  I use a brand new HP OfficeJet Pro 8600 Plus.  When I insert a good 32 GB SDHC UHS - 1 card (SanDisk Extreme UHS-1) the led next to the card slot flashes for awhile, and then "Memory card error" appears on the screen.  The card works fine in the camera and my MacBook Pro's built-in card reader.

  Please notify / thank you!

  Well, I hope that he really isn't a 12MP resolution restriction as my camera is 16.1 MP...

  Anyway, I downloaded all the images on the SD card on my MacBook Pro (there is no problem reading them) and then re-formatted the card.  After doing this, the card seems to read OK based on some images of the trial.  I guess we'll know for sure once that I load the card again and try to read it, but for now we'll call this one resolved.