Essbase 11.1.2.3

Similar Questions

• Essbase Calculated Member retreival OBIEE reporting takes time

  Hello

  My OBIEE version is 11.1.1.7.0 years have a cube ASO in Essbase 11.1.2 as my source.

  There is a calculated member ASO which retreival in reports is time consuming.

  Optimization measures proposed to reduce the wait times in OBIEE.

  PS - We have integration Hyperion OBIEE in place already.

  The heads-up on the improvement of the performance would be a great help.

  Thank you

  Hello Sam,.

  OBIEE has many ways optimized:

  1. you can use the OBIEE cache management, hitting the first time the ESSBASE CUBE and the second time the OBIEE hit the cache, it improve your processing time.

  2. in your maybe views that you have limited the main information, I mean, OBIEE is a web application bi and if you try to pretend to get a lot of lines, this might give you some problems, as a work around you could limit your opinion, in your 'LINES PER PAGE' properties, and as a work around if you want to get a large amount of data that you download it.

  

  2. If points 1 and 2 shall not apply to your needs, perhaps to think, to use the cache of essbase optimization

  https://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dstcache.htm

  Hope this helps.

  Kind regards

• HOW TO LOAD DIMENSIONS / MEMBERS IN ESSBASE ASO REQUEST

  Hello

  We are running Oracle EPM 11.1.2.4 and created with success the planning application help EPMA workspace, it is necessary to create a reporting application. We have created a new application of ePMA workspace as essbase ASO and have dimensions of base construction and members of epma itself, the need is to have the same dimensions / members in the application (planning and ASO). My question is:

  How to bulk load dimensions / workspace members in Essbae ASO using EPMA / EAS?

  Thank you

  Concerning

  Shahrukh

  You must use the same method to load the members that you already use in EPMA, if it's a pure Essbase applications and metadata should be loaded for EPMA and not through the Regional service.

  If you already have applications of EPMA, then you would use the same method.

  See you soon

  John

• Using filters Essbase to restrict access to OBIEE dashboards for multiple users

  Hello

  You can use Essbase filters to restrict access to the data in OBIEE dashboards so that users with no access to specific members are not able to see all data for multiple users.

  Any suggestions on how to go about it.

  Thank you!

  Hello

  Like any data source as an essbase.

  

  You can filter the data by the user, use a NQSESSION. to get the session the correct access.

  

  Kind regards

• Essbase error: 1042006

  Hello world

  I have a problem with the connection to the Essbase server. All services are I can connect to EAS, but when I add Essbase Server I get this error message:

  Error: 1042006: error network [10061]: unable to connect to [servername].

  I need help please...

  Thank you

  Concerning

  Thank you guys for everyone here

  My problem is solved by removing the TEMPESSBASE. SEC and the locking file and restart all the services.

  Thank you

• Run guests from time disabled for stand-alone applications Essbase calc Manager

  Could you let me know if we could assign RTP for a business rule created through the Manager of calculation for Essbase stand-alone application (not activated EMPA)? I created a business rule in calc, Manager of a standalone version of Essbase (essentially copied the contents of a calculation script and saved in a new business rule). The rule completed successfully, however the RTP section is disabled when I tried to create a variable for this rule.

  
  

  

  Attempted to create a global variable, but could not find him under the knot, essbase. This means that by the RTP can be created only for requests that are active-EPMA? We are currently in version 11.1.2.2

  
  

  No, not in 11.1.2.2 you must be on 11.1.2.3 or higher, as says 11.1.2.2 ""execution prompt variables can be used in the planning of business rules. " "

• Unable to connect to essbase by OBIEE

  Hi all

  When I'm trying to connect to essbase by OBIEE I get error as below.

  Error: Connection failed error 269587920 essbase

  I'm trying to import data from essbase into OBIEE. I get this error when I'm trying to import with the same user on cloud that I managed to import. Could someone help me on this please.

  You will need telnet installed locally, it can be enabled in windows.

  Then the command prompt

  Telnet Server port

  for example, essbase running on the default port.

  Telnet cloudservername 1423

  The assumption is that essbase running on the default port.

  You also need to open ports for the application - Ports Essbase server port

  See you soon

  John

• Essbase Server (EAS) crash (crash)

  Hello

  I am in favour of Hyperion Essbase (EMP 11.1.2.1). Web services and the EAS are on different physical servers.

  Recently, the EAS seems to hang abruptly, which leads to the stop suddenly work planned on the Essbase cubes and attempts to failure of all users to load data.

  So far, we have discussed THIS by restarting the server with installed EAS, whenever the EAS breaks down. I went through all the papers I thought would give me details of what causes the crash.

  Please help with a permanent solution, to shed light on which log files can also check to find the root cause.

  Thank you

  Joseph Meljin

  I think that you keep confusing EAS and Essbase server but anyway if you want to the top of the JAVA virtual machine for Regional service, and then in the registry, go to EssbaseAdminServices0 like your screenshot, update the - Xmx to a value higher than for example - Xmx2048m, don't know what you have it set at the moment. restart the Regional service.

  If you have several EAS servers you will need to repeat on each, also change all the settings until you are sure have the ability of memory on the server.

  See you soon

  John

• Error codes Interface Essbase/VBA

  Hi all

  I'm trying to get a worksheet updated with Essbase data using VBA/Esssbase interface but I am struck by the problems - HypCreateConnection returns an error code of-15 and I can't find a list anywhere error codes. If anyone could tell me where to find such a list, I would be very grateful indeed.

  In addition, this is my first post so if I managed to do something stupid like post it in the wrong place, I apologize in advance.

  Thanks in advance,

  Tony.

  they are all listed (containing little useful information) in the smartview.bas file while constants declared, -15 is parameter not valid.

  SS_INVALID_PARAM = - 15

  But if you check out the developer of smart guide, there is a description more detailed Developer Guide here

• SSPROCROWLIMIT in essbase.cfg vs service.olap.dataQuery.grid.maxRows essbase.properties (service provider)

  Hello

  I have a question about SSPROCROWLIMIT in essbase.cfg vs service.olap.dataQuery.grid.maxRows essbase.properties (services provider configuration file). When assign us some non SSPROCROWLIMIT in essbase.cfg must take the same number of service.olap.dataQuery.grid.maxRows also.

  These settings should not be matching?

  If you do not use repression (and none of your users never use repression) and only use Smart View so I guess that these two parameters might as well be the same. But I doubt there has ever been an Essbase installation where none of the users never used repression, it is not really relevant.

  What I see in real life, it's that people stick with the settings by default until the users are running in one or the other and then change them...

• Hyperion planning lsoing Essbase connection intermittently

  Hyperion 11.1.2.3.502

  OS - AIX 7.2

  Cluster environment

  Essbase is active/passive

  We are intermittently lose connection essbase and happens very often now

  We have the source of data for all test applications and have no problems

  We are also able to connect to applications using smart

  But when we open the planning form we got following error

  We have replaced the .sec file, but still not a lot of help

  [January 9, 2016 17:21:13]: attribute of loading members... Fact

  [January 9, 2016 17:21:13]: members of the loading scenario... Fact

  [January 9, 2016 17:21:13]: the Base currency of loading members... Fact

  [January 9, 2016 17:21:13]: from create and update Cube... [January 9, 2016 17:21:13]: unable to connect to a Hyperion Essbase.

  Check that Hyperion Essbase is running and check your network connections. [January 9, 2016 17:21:13]: an Exception has occurred when applying

  I setup a new native admin for the planning application and then update a source of app planning data, restart planning and test to see if you get the same question.

  Also, I've seen questions when you have a username called Administrator in the announcement and one in the native user directory, if it isn't the cause to ensure that the user admin, excluded from the configuration of the AD

• OBIEE 12 c will connect to Essbase

  Dear experts,

  I am trying to connect to OBIEE 12 c with Essbase from another server. Metadata import works fine, I had physical layer up to the presentation layer. But when I tried to view the members as the physical layer, I received the error message "[NQODBC] [SQL_STATE:HY000] [nQSError: 10058] a general error has occurred". "

  During the analysis to OBIEE, I managed to connect to the domain, which is the Essbase connection that I created. When you select the dimension to filter, I don't see members listed in the filter box but error message "failed to load (the ODBC driver returned an error) (SQLExecDirectW))".

  My environment:

  OBIEE 12 c is 12.1.0.2.0 Linux x 64

  Essbase 11.1.2.1 in Windows Server 2008 R2 Standard x 64

  Administration of BI tool installed on the client host Windows 8 x 64

  Someone at - he experienced this? Kindly need your help.

  Thank you

  Anna

  Hi all

  I found the answer for this one.

  Kind regards

  Anna

• Parallel applications in essbase data export

  Hi all

  I have Essbase 11.1.2.1. CAN I have Parallels for the export of data from different database 2 simultaneously. The only below done command execution in series for sale at retail and whole of the db. Please notify.

  Export data ODAPP. Level0 data detail data_file ' C:\Oracle\Lo\retail.txt';

  Export data ODAPP. Entire Level0 data data_file ' C:\Oracle\Lo-integer.txt';

  
  

  Appreciate your help.

  You could just run several Maxl sessions to run concurrently that could be called from a script of processing batch.

  See you soon

  John

• Essbase error 1020080.

  Hello

  Im having the message above error when I tried to extract data from an application of essbase Oracle Smartview for office.

  Essbase error (1020080): your worksheet contains an attribute member Aggregation with no member of this attribute.

  Is there someone who can help me? PLEASEEE!

  I agree with Dan.  It seems that you have a dimension attribute member in your POV and the size of the attribute's base in the grid.  Remove the size of the query attribute or remove the size of the application database.

• Failed to connect to the ESSBASE server & opmn was able to start

  Dear all,

  I couldn't connect to Essbase server and a service to opmn works not as well. Hard at this issue not accessible planning application, kindly help us this is very urgent and very crucial for us.

  Here are the controls and exit (Please find logs attached):

  The message is EASconsole below:

  ========================

  Error: 103: unexpected error Essbase 1030818

  Error: 1042006: error network [10061]: unable to connect to [XXXXXXXXXX.

  1. DS.
  2. XXXXXXXXXX.

  [local: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  Of MAXL:

  ========

  Essbase MaxL Shell 64 bit - version 11.1.2 (ESB11.1.2.4.000B193)

  Copyright (c) 2000, 2015, Oracle and/or its affiliates.

  All rights reserved.

  MAXL > connection;

  Enter the user name > admin

  Enter the password > *.

  Enter the host > XXXXXXXXXX

  ""

  ERROR - 103 - Essbase unexpected error 1030818.

  Error - 1042006 - network [10061]: unable to connect to [XXXXXXXXXX.d

  1. s.XXXXXXXXXX.local:1423].

  ERROR - 1030818 - login failed. Please check if the server and port are correct.

  If you receive timeout or handshake failure, please check if you have tried a bitch

  CT to secure without keyword secure or clear with the keyword secure port...

  MAXL >

  Cmd prompt try everything to start opmn below is the message:

  ======================================

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\hyptstadmingdc > cd C:\Oracle\Middleware\user_projects\epmsystem1\bin

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl status

  opmnctl status: opmn is not running.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl startall

  opmnctl startall: from opmn and managed all process...

  opmnctl startall: opmn was able to start.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin >

  

  Hi all

  Problem was solved after reinstall & reconfig (without uninstalling) box-2, after that I could use planning an application as usual without error.

  Kind regards

• Essbase & OPMN services for Essbase not getting started

  Hello

  The difficulty from the essbase and OPMN services for essbase.

  All services have increased and works well on the 11.1.2.3.500 Version, until we applied

  11.1.2.3.508 patch for essbase, EAS, APS and RTC

  Coordinator of 11.1.2.3.500 to 11.1.2.3.701

  We kept planning of Calc, Reporting Analysis and FDMEE to 11.1.2.3.500 only Manager.

  We are not able to see any error in the journal OPMN and Essbase.

  Please suggest any solution.

  Appreciate your help.

  Have you tried from command line OPMN to see if an error message is generated.

  CD \bin

  opmnctl start