ESXi 5 - W2012 VM - Dedup

Similar Questions

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-> cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• Cannot take snapshots of suspended after 6 ESXi upgrade

  Hi all, first time around;

  A few days ago, I performed an ESXi spend 5.5 to 6 by Update Manager. Everything worked like a charm, until I realized that I can take is more suspended snapshots of the virtual machines running on the host computer. Tried W2K8R2, W2012, VM Version 8/11 and VMWare Tools old and more recent versions. Whenever I try to get a snapshot of put it to sleep I get these errors in the virtual machine vmware.log file. Virtual disk service is running in the operating systems:

  2015 06-11 T 13: 32:54.081Z | vCPU-0 | A115: ConfigDB: setting displayName = "NXCAGATEWAY."

  2015 06-11 T 13: 32:54.200Z | vCPU-0 | I120: SnapshotVMXTakeSnapshotComplete: done with snapshot "PRUEBA": 11

  2015 06-11 T 13: 32:54.200Z | vCPU-0 | I120: SnapshotVMXTakeSnapshotComplete: Snapshot 11 failed: impossible to suspend the virtual machine (31).

  2015 06-11 T 13: 32:54.200Z | vCPU-0 | I120: SnapshotVMXTakeSnapshotComplete: Instant incomplete cleaning 11.

  2015 06-11 T 13: 32:54.203Z | vCPU-0 | I120: SNAPSHOT: SnapshotDeleteWork ' / vmfs/volumes/548b836e-61e32ba2-7419-001517fdda30/NXCAGATEWAY/NXCAGATEWAY.vmx': 11

  2015 06-11 T 13: 32:54.203Z | vCPU-0 | I120: SNAPSHOT: Snapshot_Delete failed: the specified snapshot are not (28)

  2015 06-11 T 13: 32:54.204Z | vCPU-0 | I120: SnapshotVMXTakeSnapshotComplete: cannot delete the snapshot cancelled: failure to suspend the virtual machine (31). VigorTransport_ServerSendResponse opID=a776b9be-ce1e-4119-bfb6-fb7d10ceef8c-19582-ngc-15-80-5ced seq = 35577: complete snapshot request.

  2015 06-11 T 13: 32:54.208Z | vCPU-0 | I120: TOOLS of the call to unity.show.taskbar failed.

  This situation prevents me to take backups of virtual machines running on the host, any help I can get?

  Kind regards!

  Please check if the latest patch is installed, which solves problems with suspended snapshots (see http://kb.vmware.com/kb/2116127).

  André

• POS for ESXI backup

  Hello

  I'm under two-node esxi cluster. Run 10 vm in total with a capacity ranging from 300 GB to 750 GB.

  Got a box of SIN and the thought of attaching the backup of the virtual machine on that storage. Can configure it like NFS or CIFS only.

  Few questions;

  1 would like to know that means the limit of .5TB, 1 TB or 2 TB in POS devices?

  2 Does .5TB are limit for CIFS, 1 TB to 2 TB on VMFS or NFS store? This means destination anywhere where I'm going to keep backup of virtual machine?

  3. as the size of the VM/s total in my case is about 3 TB and 4 TB does that mean I can't backup all my vm with a camera or made with 2 device?

  4 FAQ tell a device by ESXI that means I limit of 2 devices in 2 host cluster?

  Breg,

  Sushil

  1. While EGGS installation where should I have to install it? He the dedupe destination stores say 3.02 TB as above and it may be any little other than dedupe store LUNS.

  It should be deployed in the vCenter (vCenter where VMS to protect). You can always start with a provisioning end if you do not 3.02 TB of space.

  See this article from blog for a rapid deployment & configuration - http://onevirtual.wordpress.com/2013/11/15/vdpvsphere-data-protection-5-5-deploy-configure-quick-start/

  2. in case if it is other than the store of de-duplication how will it will be added to the egg apparatus.

  You have the option of choosing several data stores all in configuration - the article above should cover this information too.

  3. as NAS deduplication box will be present on the production network and will be accessible via the network of production only. Does have any performance issues?

  Check if you can take advantage of adding hot instead of backup on network.

• STOR. ESXi and E BASICS

  I have this problem:
  We use servers that are virtualized with ESXi Hypervisor.
  And the Windows operating system uses the STOR. E BASICS 500 GB to backup their data.

  Now a hard drive of this type felt, the hard drive is about 1 year ago.
  So I want to swap the drive with one of the same only more recent type, but now ESXi does not realize it.

  In a Windows operating system, the drive works fine, but ESXi, I have a chance!
  Y at - it a new firmware or something differnet changed?

  Experiences?

  The STOR. E BASICS 500 GB 2.5 "is the USB3.0 external HARD disk.
  It s a device plug n - and - play, requiring no additional drivers.

  Toshiba says that this HARD drive works properly under Microsoft Windows XP/Vista / Windows® 7 8/Windows/Windows 8.1

  The HARD disk supports the USB3.0 standard, and this means that you must 900mA can get it recognised correctly.
  In the case where the drive HARD isn't recognized on USB 2.0, I recommend you to use a USB cable to Y which allows to connect the HARD drive to two USB 2.0 ports

• Mac OS x won't start on mac pro esxi host

  We have the latest mac pro machine functioning as a construction of host 5.5.0 esxi 2718055.  We have setup the virtual Mac machine of the as a waiter in a magic triangle to our Mac OSX windows domain configuration.  Everything was up and running for some time now not really used because we delayed the purchase of our projected deployment Mac until this year.  I logged on today, and he says he has several updates and necessary to restart, so we issued the command reboot. Now the machine won't start upward.  It starts the boot process you see the Apple logo and progress bar starts moving on a 1/4 of the way and then it just turned off. I tried several of the commands below in the link, but nothing works, it just turns off. I tried to use my mac with vm ware fusion and the connection to the host and always change. I have triple checked that I am in the comments window active when you press these commands, but the problem is it only stays on during approximately 5 seconds then stops. I have removed from the inventory of esxi and re added, as well as restarted the ESXi host as well.  The virtual machine is sitting on the local storage of the esxi server.

  https://support.Apple.com/en-AU/HT201255

  Has anyone else had a problem similar to this?  I'm getting to this section and the progress bar starts to go, but then stops and turns off virtual machine.  How can I enter in address this further.

  

  Okay, so I went through the list and now I got using the command option r. tried before but maybe I press the keys long enough.  I was using my mac book pro and pro fusion to do all this. Couldn't make it work when you use the client heavy vsphere on my windows machine. Repair disk permissions is grayed out. I ran check disk permissions and got a ton of errors, ran check disk and he stopped saying repair the disk. Ran repair disk and he stopped to say that he cannot repair the disk, backup as many files as possible, reformat the drive and restore your backup files.

  Is there another way to try to fix this sucker, or is he at this point a POS and build a new one?

  

  

• PowerEdge Raid700 in RD540 with ESXi Thinkserver

  Hello

  I'll put up a hypverisor 5.5 ESXi update 2 on a lenovo RD540. There is a RAID700 controller.

  I use 3 HARD drive in a RAID6 configured with the tool of the bios (Mega RAID LSI)

  The server works fine, but I don't see the healthy of the RAID on the ESXi.

  I don't see the virtual disk, not the adapter of storage or physical disks. If one lose a disc ESXi does not know, I hear only the PIF from the server.

  How can I solve this problem?

  If I use the "Lenovo easy start' to install ESXi RAID adapter will be with ESXi?

  Thank you in advance.

  Concerning

  Arnaud

  Right now, I'm on the WebBios and I can't find where I can configure it

• W530 Bare Metal with ESXi 5.1 - Possible!

  Guyz!

  This will be good news for all those who want to wear metal ESXi W530 5.1.

  With simple clicks of customization, the whole installation runs smooth and Nice.

  For those who are interested. Answer in the thread and a lot of fun to share with you the way to do it.

  (I can't just download the image, it will be great if I can put it in a place).

  You get a few things to do.

  1. the ISO original Esxi 5.1. Download after free registration of VMware.

  2. a customizer of ESXi (http://www.v-front.de/p/esxi-customizer.html#download), this helps you to install a VIB in the ISO in order to go through the installation

  3. download the map here VIB (http://shell.peach.ne.jp/~aoyama/wordpress/download/net-e1000e-2.1.4.x86_64.vib).

  4. just the disk with the ISO to boot you careated. Everything works fine

• Desktop HP Envy 750qe: cannot install ESXI 6.0 on this server

  The specifications of the HP Envy 750qe desktop say nothing about the LAN card.  The motherboard is MS - 7826 Ver 2.0.
  There is a metal box closed covering the LAN and 2 accessories usb soldered to the motherboard.  Windows 10 indicates that the LAN controller is Realtek PCIe GBE Family Controller.  I would like to know the chipset used for this LAN Controller without destroying the material.  I can't find a direct reference anywhere - Realtek, HP or otherwise.

  Thank you

  Joe

  Realtek 8168 - built a custom iso using this link. LAN problem is resolved.

  http://www.v-front.de/2015/04/ESXi-60-hits-VMware-online-Depot-what.html

  installed the customizer on windows 7 and run the power shell script.

  .\ESXi-customizer-PS-v2.4.ps1 - vft - load net51-drivers

• Why my Win Serv 2012 std (hp ROK) do not settle on my 5.5.0 esxi?

  Hi people,

  I am a beginner, so be patient with me please.

  My company bought a proliant DL385p Gen 8 and it came to pass with support of dvd windows server 2012.

  The media label says:

  "Windows Server 2012 Recovery Media for Windows Server 2012 ROK products for HP Proliant Servers"

  I'm trying so install windows 2012 with this media in my Esxi 5.5.0, but the installation starts I get a message saying tha windows must only be installed in the hp machines.

  My doubt is that I am under esxi custom hp: VMware-ESXi-5.5.0-1746974-HP-5.72A.3-Jun2014.iso

  Why my windows does not recognize that I have do its installation on an hp machine?

  How could I solve this problem? Could I download another image of windows and activate it with my key product?

  Best regards

  You can get more help on the forum specific Proliant here:

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VCIs4PldXuI

• Trying to connect locally to W2012 R2

  Hello

  First time post here :)

  My question is related to W2012, R2. I'm trying to MOP him. When I use hostname\username I can not connect. Hostname is the name of the server W2012. I received: the requested session access is denied. When I use the. \UserName I am able to connect.  I have long connected to W2008 and I always used hostname\username where hostname is the name of the windows server. I'm using W7 64-bit. My question is why it works with. \UserName and it does not work with servername\username. Have searched for an answer, I have not found an explanation. Appreciated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can I install a brand new SBS2011 OEM standard that is not used on an ESXi host?

  I have a client who needs anupgarde to their existing system of SBS2003. They buy a standard OEM of SBS2011 copy from Amazon despite me providing the details for a full purchase of reatil! I need to know, what I can put in place the new SBS2011 system on a host ESXi 4.1? It is the only facility of it and I will use the swingmigration for installation kit.

  Sorry I can't find a relevant server/sbs forum right now.

  Thanks for all the answers.

  Hi Justindev,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Small Business server on TechNet forum. Please ask your question in the Small Business Server TechNet Forums.

• Dell custom ESXI 5.5 update Manager software

  Hello

  I installed some Dell R710 server custom Dell ESXi 5.1 Version.Now I would update this ESXi 5.5 servers (Dell Version)

  Question: Where can I find as a Dell of ESXi 5.5 custom Version for VMware Update Manager (.zip)

  Thanks for help

  What about Peter

  Hi Peter,.

  You can download the ISO from Dell here:

  www.dell.com/.../DriversDetails

  Be sure to upgrade your vCenter and Update Manager 5.5 before trying to download the ISO (under ESXi images).

• OMIVV 3.0 - errors "Hypervisor not taken in charge", cannot day several firmware M610 hosts / ESXi 5.5 U2

  We have just updated OMIVV to version 3.0.

  We have problems with 3 guests in our infrastructure - M610 all running ESXi 5.5 U2 P55.  Any report of strangely hosts in OMIVV.

  -"Unsupported hypervisor" is reported in the screen "check hosts compliance."

  -We can update the firmware on the individual hosts, but the update of multiple hosts in the cluster level does not at all.  The inventory of the firmware page does not display anything.

  All the other features seem to be working on these hosts and all of our M620 do not act in the same way in OMIVV.  All the firmware is completely updated already on all hosts.

  Hi eltuga,

  Officially the 2950 is not supported by VMware to run vSphere 6, see http://www.vmware.com/resources/compatibility/search.php?deviceCategory=server

  

  Also the integration of the Dell OpenManage for VMware vCenter also does not support the 2950 more see the http://topics-cdn.dell.com/pdf/dell-mp-vc-3.0_Concept%20Guide_en-us.pdf compatibility matrix

• Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

  Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

  On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

  Hello

  You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter